Riparare Dyson DC 32 Animal Pro
Вставка
- Опубліковано 12 вер 2024
- Come Riparare L’aspirapolvere DC 32 Animal Pro , Dc 23
Dopo 8 anni di onorato servizio la mia aspirapolvere ha dato segnali di fumo , diciamo che si è bruciato il motore , avendola pagata a suo tempo all’incirca 550 euro dovevo decidere se comprarne una nuova altre 550 euro oppure tentare di ripararla con 100 euro , devo dire che non è stato così difficile ripararla basta stare attenti quando la si smonta .
Di seguito i link dove ho comprato il motore e il filtro :
www.amazon.it/...
www.ebay.it/it...
I just did this job today on a DC23 which is pretty much identical to the DC32. I was able to get the HEPA filter Qualtrex FIL309 as substitute for Dyson P/N 916083-02 in Australia. The motor 916001-01 had to get from the UK. $115 filter + $165 motor = $280 vs new machine $900. Don't buy just the bare motor unless you're confident you can get the cooling fan assembly off the top of the old one and it still works, the Dyson genuine part comes complete with the cooling fan fully installed. On mine it was very difficult to remove the 4 screws holding the motor to the case, they are Torx T10, one of them snapped, to replace them buy some M3 x 12mm bolts from the hardware store, doesnt have to be Torx head. Phillips head or Allen head is fine. Thanks for the video !
With the help of your film i was able to give my vacuum cleaner a second life. Thank you!
Thankyou for showing the whole disassembly. Very helpful. Molte grazie.
Dziwne, mój też po upływie 8 - 10 lat spalił silnik. Bardzo dobry film. Dziekuję!!!
Mille grazie.
Thank you very much!
Thanks 👍
Superb Job. Many thanks!!
🤩👍👍
Hello. I did the replacement of the motor but i have this gasket left over. Where does it come?
Like the soundtrack!! What's it called? Thanks
Does anyone know how the front caster wheel comes off? Mine is off the axel and might be broken but I don't know if this is one of those that just is popped out or there's a special screw in there.
Do you know how to disassembling the extensible arm?
Fernando Boned Izuel sorry but for now i don’t know how to disassembling the estensibile arm