Honda HRX217HYA Drive Clutch Cable Adjustment | Mower would not go Fast 💨

Поділитися
Вставка
  • Опубліковано 8 січ 2025

КОМЕНТАРІ • 69

  • @zukmeister007
    @zukmeister007 Рік тому +8

    My lawnmower was going so slow even at full speed and now I can't even use the fast mode because I'm running after it. Thanks so much for the quick fix!

    • @appleztooranges
      @appleztooranges  Рік тому

      Your welcome. Glad it worked

    • @Tro25
      @Tro25 7 місяців тому

      Yes thank you I was going to return it. My old one goes faster I knew something was wrong out the box.

  • @skipdog77
    @skipdog77 Рік тому +5

    Bought the HRX217 7 years and change ago.. it was slow from the beginning!! This past mowing season it got really slow and i thought it was a bad transmission. I just found your video and sure enough it was just slack in the cable. I can’t believe I’ve been mowing slow for 7 years! 😂. Thank you for the video!

  • @martintoher
    @martintoher 10 місяців тому +2

    I just got a HRX 537 (non US version of the 217) as a throw away. Other than needing a full service etc. the mower was good except it moved really slowly.
    Using your instructions, I went from 4 clicks back to 1. Top speed is now pretty fast.
    Thank you.

  • @AmericanConstellation
    @AmericanConstellation Рік тому +3

    Thanks. I just adjusted mine and it needed it. The other day I was thinking the mower had gone faster.

  • @philchristmas6818
    @philchristmas6818 6 місяців тому +1

    Your advice & demo is spot on sir. Noticed my 2016 HRX217 with 173.5 hrs. on it was mowing slower than usual this season. So I tested my mower, it wouldn't engage on first click but did engage on second click & so on. I adjusted the cable nut like, you showed, about 2 to 3 revolutions (¼" or less) & it did the trick! Now it moves on 1st click & runs quite well (very fast) on full open clicks. Thank you!

    • @appleztooranges
      @appleztooranges  6 місяців тому +1

      You’re welcome it was bothering me too. I’m no mechanic just looked thru the service manual

  • @brucegordon4874
    @brucegordon4874 3 місяці тому +2

    mine was having the same issue. thank you for showing me how to adjust it. : )

  • @bosco9236
    @bosco9236 7 місяців тому +1

    Thank you, great video. Nice close ups of which way to move the upper nut.

  • @u2asian456
    @u2asian456 6 місяців тому +1

    Thank you. Very helpful. Took care of my slow hydrostatic.

  • @reggievangleason9511
    @reggievangleason9511 Рік тому +1

    Very informative. Thanks for clear concise instructions.

  • @josestirtabudi6247
    @josestirtabudi6247 Рік тому +1

    Thanks mate! Was really helpful!

  • @alberto3277
    @alberto3277 Рік тому +3

    Gracias, es justo lo que necesitaba saber, saludos.

  • @dougwiltfong9738
    @dougwiltfong9738 Рік тому +1

    worked for me. thanks for the video. hrx217k5hzaa electric start

  • @byronfollowell4243
    @byronfollowell4243 Рік тому +1

    I had the same problem with my Honda dealer. My mower had slowed down considerably over what it was when I first purchased it. No problem they said. What the heck?! I could’ve pushed that heavy deck faster than the transmission was going. What’s with Honda dealers?! Thanks for your video!

  • @Jacob-5412
    @Jacob-5412 10 місяців тому +1

    Thanks so much for posting this mate, helped me out! 🙌

  • @franciscorazo3458
    @franciscorazo3458 Рік тому +1

    Thanks!! For the the info. I just adjusted mine. I have 2 but one I did it all the way up to the plastic piece. (Only way I got it to go fast) I wonder if I need a new cable

  • @carmennole1130
    @carmennole1130 Рік тому +2

    If you loosen the handle and put it towards the motor, it’s a lot easier to work on that adjustment

  • @CBrandonChapman
    @CBrandonChapman 3 місяці тому +1

    I'll just comment on the fact that I like your Jurassic Park T-shirt.

  • @ctfirepitpistolandcigar512
    @ctfirepitpistolandcigar512 3 місяці тому +1

    Good video thank you

  • @RocketJSquirrel1000
    @RocketJSquirrel1000 Рік тому +1

    once again Honda over engineers something that should be easy. But thanks for the video. This will help me!

  • @TomCassidy-l9c
    @TomCassidy-l9c 7 місяців тому +1

    Thanks! easy to do video!

  • @timivers8823
    @timivers8823 8 місяців тому +1

    Thanks! Now I can run!

  • @carmennole1130
    @carmennole1130 Рік тому +1

    the other cable adjustment is for easier cold starts

  • @johnhalloran7374
    @johnhalloran7374 7 місяців тому +1

    Thanks, Pal!

  • @SeahawkAz
    @SeahawkAz Місяць тому +1

    Do you ever get a rattling from the engine area after disengaging the blade it gets worse if you slow the throttle

  • @carmennole1130
    @carmennole1130 Рік тому +2

    youll never want it to
    go that slow tho , nor too fast ,, ,,but do not tighten it till you get it where you want

    • @appleztooranges
      @appleztooranges  Рік тому

      Yes. What do you think of Honda mowers?

    • @carmennole1130
      @carmennole1130 Рік тому

      That’s all I have ,,,four HRX 217hya,s ,but I do many lawns

  • @dalewiley9208
    @dalewiley9208 2 місяці тому +1

    You should have named the dealer that refused this service.

    • @appleztooranges
      @appleztooranges  2 місяці тому

      @@dalewiley9208 Honda dealer in west Springfield Ma M&t

    • @dalewiley9208
      @dalewiley9208 2 місяці тому +1

      @@appleztooranges Any dealer that treats its customers like that should be called out.

    • @appleztooranges
      @appleztooranges  2 місяці тому

      @ I agree 100%

  • @derinum
    @derinum 5 місяців тому +1

    Awesome I’ll try this on my hru216 the repair guys are such know alls but they don’t mow all day so they don’t know what there talking about

    • @appleztooranges
      @appleztooranges  5 місяців тому

      @@derinum thanks was annoying me too. Figured I’d give it a try. One of my good videos haha 😆

  • @fotofbf8327
    @fotofbf8327 18 днів тому +1

    Is there a simiar cable adjustment for the blade engagement?

    • @appleztooranges
      @appleztooranges  18 днів тому

      @@fotofbf8327 unsure. Never looked into it

    • @fotofbf8327
      @fotofbf8327 18 днів тому +1

      @@appleztooranges The blade lever (with yellow button) is right next to the drive lever. Perhaps, it'sI also cable controlled? Mine disengages frequently. I'll explore and advise if successful. Thanks for the quick reply!

    • @appleztooranges
      @appleztooranges  18 днів тому

      @ yeah I never messed with it yet

    • @fotofbf8327
      @fotofbf8327 17 днів тому +1

      @@appleztooranges FYI- as expected, there is and it adjusts similarly. Problem solved! Thanks for the lead; Happy Holidays!

  • @DianeCurtis-y6m
    @DianeCurtis-y6m 5 місяців тому

    Do you test the lawnmower with the grass bag on or off?

    • @appleztooranges
      @appleztooranges  5 місяців тому

      @@DianeCurtis-y6m off but it shouldn’t really matter. I don’t use my bag honestly

  • @aidanhill
    @aidanhill 4 місяці тому

    What do you do if you have reached the maximum thread at the top?

  • @lisasweeney970
    @lisasweeney970 9 місяців тому

    It’s better to position camera where you can see what your doing or show where your adjusting the wire couldn’t see where or what you were doing redu video but different angle

  • @josephseelos5176
    @josephseelos5176 Рік тому +1

    Now's the time to buy another used snowblower and fix it up.

  • @cameronbennett9175
    @cameronbennett9175 Рік тому +1

    Why you ask your drug dealer if your mower working right drug dealer don’t know shit

  • @rubengonzales3817
    @rubengonzales3817 8 місяців тому

    Can’t see anything

  • @troutslayer5518
    @troutslayer5518 Рік тому +2

    They need a tweeker on 8 cups of coffee mode