Kenwood TS-520 SSB HF Transceiver No Transmit Repair

Поділитися
Вставка
  • Опубліковано 5 жов 2024
  • Deoxit Contact Cleaner amzn.to/3AoUWe8
    CRC Electronic cleaner spray amzn.to/3wqvRTo
    Kenwood TS-520 SSB HF Transceiver No Transmit Repair
    Specs:
    GENERAL
    Type: Amateur HF transceiver
    Frequency range: 10-80 m i 7 bands
    3.5-4.0 MHz
    7.0-7.3 MHz
    14.0-14.35 MHz
    21.0-21.45 MHz
    28.0-28.5 MHz
    28.5-29.1 MHz
    29.1-29.7 MHz
    10.0 MHz WWV receive only
    Tuning steps: Analog / continuous
    Frequency stability: Within ±2 KHz during the first hour after 1 minute warmup.
    Within 100 Hz during any 30 minute period thereafter.
    Mode: SSB / CW
    Channels / memory management: 4 optional
    XTAL controlled
    Repeater shift / offset: No
    Power supply: Mains: 120 / 220 VAC
    or 13.8 VDC
    (12-pin Jones connector)
    Current drain / power consumption: RX: 45 W @ mains - 5 A @ 13.8 VDC (Heaters on)
    TX: Max 280 W @ mains - 15 A @ 13.8 VDC
    Antenna impedance / connector: 50-75 ohm / SO-239
    Dimensions (W*H*D): 335*150*335 mm (13.2*5.9*13.2")
    Weight: 17 Kg (37.4 lb)
    Other features: NB. VOX. 25 KHz XTAL calibrator.
    RECEIVER SECTION
    Receiver system: Double conversion superheterodyne
    1st IF: 8.295-8.895 MHz
    2nd IF: 3.395 MHz
    Sensitivity: 0.25 uV (10 dB S+N/N)
    Selectivity: SSB
    2.4 KHz (-6 dB)
    4.4 KHz (-60 dB)
    CW (With optional CW filter)
    500 Hz (-6 dB)
    1.5 KHz (-60 dB)
    Image rejection: 50 dB
    AF output power / speaker: 1 W at 10% distortion / 8 ohm
    External speaker connector:
    TRANSMITTER SECTION
    RF output power:
    SSB (PEP): 100 W
    CW (DC): 100 W
    NB! Output is lower with 13.8 VDC than with mains supply
    Modulation system:
    Max FM deviation (Factory set): No FM
    Spurious emissions: Better than -40 dB
    Microphone impedance / connector: 50 Kohm / 4-pin (Metal locking ring connector)
    Microphone input level: ? mV
    MISCELLANEOUS
    Manufactured: Japan, 1973-197x (Discontinued)
    Additional info: Tube hybrid: 12BY7A driver and two S2001A finals
    Related documents: User manual (4.6 MB)
    RF driver: 12BY7A
    Modifications and fixes:
    Reviews:
    Options / Accessories:
    MC-10
    MC-50
    SP-520
    TV-502
    TV-506
    VFO-520 Hand microphone. 50 Kohm
    Desk microphone. 500 ohm/50 Kohm selectable
    External speaker. 8 ohm, 2 W
    2 m transverter
    6 m transverter
    External VFO
    To Help Support the Channel:
    My Amazon Gift Wishlist www.amazon.com....
    Email:
    imelectron@yahoo.com
    I am an amazon associate if you use the links provided I do receive a small commission at no extra cost to you which helps me out on the cost of making videos

КОМЕНТАРІ • 2

  • @W4YDL
    @W4YDL Місяць тому

    Awesome! Can you tell me where you sourced the new transistor? I suspect my Q5 may be bad...would love to pop a new one in!

    • @TheElectronMan
      @TheElectronMan  Місяць тому

      I’m lucky to have a local electronic component store where I was able to get a replacement transistor. I’m not sure if it was NOS (New Old Stock) or an ECG replacement since I don’t have the packet or receipt anymore. I just brought in the bad one, and the store matched it up for me. The replacement cost less than $10, I remember that.