How To Install Wetsuit Pockets
Вставка
- Опубліковано 4 вер 2024
- How To Install Wetsuit Pockets... Whaaaat?! A quick tips video actually UNDER 5 MINUTES!!!! 2022 is off to a banger!
I made this video to solve my own problem. I go through TecBnB shorts like crazy. Two pairs a year. ~$200 per pair. Insane. To break the cycle, I'm installing pockets straight onto my wetsuits... 5mm and 3mm. Much cheaper and just as efficient.
In this video, I'm breaking down step-by-step how to go about installing glue-on thigh pockets to your wetsuit.
Here are the products featured in this video:
Adhesive: amzn.to/3qMDAEQ
Pockets: amzn.to/3qOI3a7
Wetsuit: amzn.to/3mYvpUR
Chalk!: amzn.to/3ETfvkU
(These are affiliate links. Purchases made through these links may earn me a small commission at no additional cost to you and I thank you for supporting our channel!)
Thanks for watching!
D.S.D.O
James
-----------------------------------------------
Want some Divers Ready! Swag? Head to The Dive Locker Store on our website! www.diversready.com/store
-----------------------------------------------
What do we dive? Our full and independently chosen gear choices are here:
bit.ly/divers-r...
------------------------------------------------
Connect with Divers Ready!:
Facebook: / diversready
Instagram: / diversready
Twitter: @diversready
------------------------------------------------
FOR MORE INFORMATION or to collaborate with Divers Ready! you can reach out to us via our website:
www.diversread...
-----------------------------------------------
If you want to take a PERSONALIZED dive course at any level with James from Divers Ready, you can contact us here:
www.miamitechn...
-----------------------------------------------
**Disclaimer: Divers Ready! firmly believes you can not teach someone to dive through the internet. We strongly urge people to ensure they receive dive instruction through an internationally recognized training agency and to dive safely and within the limits of their certification level at all times. Our channel is aimed at already-certified divers looking to further their skills.**
----------------------------------------------
In accordance with COPPA laws, please note that content on the channel Divers Ready is not specifically made for, or targeted at, children.
----------------------------------------------
Dive Safe. Dive Often.
#scubadiving #diversready #improveinspireexplore
Music used under license. Get yours here!
www.epidemicso...
How To Install Wetsuit Pockets
Though we are based in Florida, Hawaii, California, and Michigan have 100 ft and 300 ft ocean and lake underwater coral reef, shipwreck, cave diving, freediving, scuba diving, and closed circuit rebreather trips. To learn full face mask, beginner scuba diver, advanced scuba diver, tech scuba diver, cave diver you can reach out to a professional scuba diver. Everyone should get scuba diving insurance with Divers Alert Network.
We support all types of diving that can be found at PADI, DALLMYD, Dive Talk where they talk about cave divers react, Waterline Academy and BlueWorld TV.
We support all types of diving products, like a full face mask, fins, BCD, dive computer, regulators, closed circuit rebreather, underwater scooter, from many companies like Simply Scuba, Mares, Dive Rite, Cressi, Zeagle, Huish, Hollis, Scubapro, Shearwater, Garmin.
James any feedback regarding the longevity of the glued on pockets?
I have cargo pants I wear over the top, cheaper, and acts as an abrasion guard for work dives. Duluth Trading firehose pants work a treat, hard wearing, but kinda expensive when not on half off sales.
That's really a great idea. I'm not a technical diver but I'm going to put pockets on my wet suits. Thank you
This looks like exactly the solution I've been looking for. It would be great to get an update once you've started using them as far as durability and usability are concerned.
ProTip™: Run a nice bead around the edge of the pocket afterwards, as it can be seen in your last clip that the edge (which probably receives the most wear and tear) is already coming loose.
This exact conversation came up with my wife as after our second trip she now wants to convert to a true backplate and wing BCD. The Aqualung she has just has too much padding, and danglie stuff in it by design. Her only concern was where to store her few accessories. I’d considered tec shorts, but glad I saw this first because they ARE expensive. I was considering just wearing regular cargo shorts with additional pocket Velcro for like $12. 😂
I have been doing this for years, tech shorts never made sense to me. I use either a plastic putty knife or an acid brush, which you can at local hardware store. I find these cleaner and more accurate and still disposable. Soft weights work well to distribute weighting and making sure each area has weight pressing down, pile more on top. Take your time. PS - ain't know way you are transferring pockets once glued onto a suit, just get new ones.
Great tips! Thanks!
Can you safely remove an old pocket without damaging the wetsuit if the pocket wears out?
Perfect timing. I was just thinking about ditching my tech shorts.
That's how I roll!
I have these pockets on a 3mm. They work great. But I did find them quite smaller than the ones on the Apeks tec shorts...
Nice Tip. I'd rather have stuff in pockets than clipped off in various places on my harness. I got a pocket and used snaps like from a boat cover to attach it to my suit. It worked well for several shore dives then I lost the pocket and contents (fortunately just an inexpensive slate) to the abyss when I did a boat entry that was rather high up. I have bought a new one and now am trying a combination of snaps and Velcro though I probably should have just committed to gluing the thing directly to the suit.
Great idea James!
Thanks Robin!
Nice video, as always! two questions though:
1) do you see any contraindications for the wetsuit?
2) would you recommend this procedure also on a neoprene dry suit?
Love the new intro!!
How are the pockets holding up, three months later?
Make your own tech shorts, I glued some light monkey pockets on an old highland pocket shorts (cut the old small pockets off) and the durability has been much much better, tons of dives and do not look to be wearing out anytime soon!
Great information as usual James! I just ordered a wet suit (I'm a big guy like you) at Wet Wear in Hallandale Beach. They are putting a pocket on for me. Now if I decide I want a second one, I know how to do it myself.
If the pockets wear out before the suit, it there a way to remove them without damaging the wetsuit?
You can also have that glue reinforced with some stitching and they’re never coming off. Extra glue over the stiticing on the inside. I have an O’Neil suit with Halcyon pockets I inherited and they look like they belong there.
How the stitching is done? What thread and needle to use? Thanks!!
I was really hoping this was an older video so we could see how this pans out for you!
Great video! And under 5 minutes, I'm shocked!
Nice watch by the way James ⌚
hey… so after 2 years of use, u got any learnings to share from these glue on pockets? … I am considering this so thought I should ask.
I like you to cover HP steel tanks and the new Carbon wrap tanks. Every time I mention them to my tanks fill up station thy talk pest about them and I'm not sure what to believe.
Thanks, great idea!
Awesome! Thank you for sharing!
That’s awesome because I really don’t like wearing the tech shorts. None of them fit me properly I have to reach below the knees just to get into the pockets.
thanks for another very informative video. Happy Diving
How about a pair of carhart shorts?
Great info as always. Thanks for sharing.
How has this held up a year later? I’m looking at doing this to my 7mm! And are those the XS scuba ones?
Would it be possible to remove the pockets after the glue sets? In case the pockets go before the suit?
Cool idea. Great tip man
@DiversReady So after a year and a half, how did the pockets hold up? The world wants to know :)
May be a dumb comment, but I am assuming the adhesive is reef safe..
Easier to have the wet suit on a cylinder, glue the pocket, and have a strap around to hold it tightly in position. Better then a led wieght
One year passed, how did they hold up?
James - I’m really curious about how this affects donning and doffing the suit. Seems like the legs would be stiff and prevent turning it inside out. Thanks for sharing your insights.
James, I too would love to hear how these have worked out so far.
But what if the pockets don't hold up. Do you need to get a new wetsuit since you glued these pockets which are now unusable to a wetsuit which would still work?
I'm guessing, if both pockets are made of similar neoprene, they'll last the same amount of time. Except the shorts you can throw out and get new ones, where as the pockets are married to the suit forever.
i've done this before but unfortunately not long lasting so I just sew it to my wetsuit.
Link to these pockets???
Is there no requirement to sew the edges? Or are adhesives so much better today?
I'm thinking back to when my Dad made us wetsuits from kits in the 70s. Do you remember the ones with the beaver tail that kept the trousers up?
I do remember the beaver tails! They are actually still popular in the mediterranean. No need to sew the edges, that adhesive is strong and flexible.
Hey James, have you ever done a review on EPIRPS, uses and products? #AskDiversReady
Answer coming in our next Channel Update/Dive Instructor Q&A video!
Do the pockets make it more difficult to take off the wetsuit, turning it inside out?
But what if the pockets wear out before the wetsuit?
What are you using to stretch the neoprene suit leg while applying the pocket and during curing time?
A scuba cylinder.
I just use some cargo work pants. They don't slip thanks to the crotch strap and they're only about 20 Euros.
Did they have big enough pockets?
First view boom