CorelDraw and postscript printer. 230 mesh at 30 newtons Image at 300 dpi at size wanted Convert image to grey scale Go to invert colors - invert Go to gamma and increase 15% Go to print Separations -black 45 lines 22.5 angle Press print Done
This is slightly different than the way I was taught to do it (I invert & adjust the levels before bitmapping), but I like this technique better. Can’t wait to try it out👍🏾.
How to remove the background white when you're going to print halftone design in Black T-shirt? I just want to print only the subject and remove the background. I followed your steps and wondered how can I do that if I only want the subject without the background.
Hey man thanks for the video, quick question, at the start i import the vector AI file then follow this process - how do i save this as a vector file again? i only have the option to save as a PSD but will this mean it is no longer a lose quality or am i ok?
Maestro where have you been bro?!! You're my teacher and you don't even know it. Happy that you made another video. I hope everything is well. Thanks for dropping some more knowledge on my head. I just bought my first four color press and I still have it in the box. I'm really excited because I was using an ironing board to do one color prints. I just want to say thank you because I learned so much from you
Just a 230. Awesome. I will have my artist watch this video and we will see what we come up with. Thanks for the quick reply and I love your videos!! #slingerprintworks
Doesn't matter what time I expose for , my halftones washout . In the same screen it's under and over exposed . I use a hose and they wash out and I try a pressure washer they also wash out ..... ugh so frustrated lol
Hello, I would like to try this (1 color) on a grey shirt black ink. Do I invert the halftone image like you would do to print on black shirts or not invert. Any help would be appreciated Thanks
Instead of selecting and deleting the black you would select and delete the white. That will leave you with the black image and you don't need to worry about colour overlay.
BOA NOITE SOU WESLLEY ACOPANHO SEU TRABALHO SOMOS AQUE DO BRASIL TENHO UMA GRAFICA E SERIGRAFIA MEU SONHO E POSUIE UM CARROSEL DESSE TOP' AQUE E MUTI CARO.
Thank you for supporting the channel 🙂 I use 230 mesh count for most of the halftone prints. The video I did using 110 mesh count was to show that it could be done. The only difference is that the dots are going to be a bit bigger.
I'm curious I want to make sure I have the right mesh count. I just got a half tone design and want to make sure I got the right mesh count. Can you please tell me the mesh count.
Hi, could you please explain why did you chose a dark overlay? I thought you would pick a white overlay to make the artwork look clearer on a black garment. I did the same as you and found that black overlay completely changes the artwork color to black which is not what someone would want when printing on a black t-shirt!
Yes, he needs the white part to be inked, so he made it black so he can print it on the film to exposure it and then fill it with white ink ! The design on the film needs to be always black so it can be washed away later.
Why do people still insist on doing this by hand? Folks go to school for years to learn these programs like Adobe which again why I don't understand why folks don't simply buy an add on like Filmmaker 10 or NXT Sep where all these variable are preprogrammed. Sure these cost money. Example my software with CoralDraw and my add-ons rip this image in under 2 minutes with it being ready to send to printer and this is vector or raster file.
CorelDraw and postscript printer.
230 mesh at 30 newtons
Image at 300 dpi at size wanted
Convert image to grey scale
Go to invert colors - invert
Go to gamma and increase 15%
Go to print
Separations -black
45 lines 22.5 angle
Press print
Done
Thank you for this type of videos, we need more of how to do color separation, artwork specifically for screen printing 😎💪👌 you Rock!!!!
how about separating colors to halftones? great tutorial btw
Facts bro. 230 is my fav mesh by far
Hey Taino, I’m confused on your video from this and the DMX. You did invert and this was a longer process. Thank you for the videos
Thank you so much for responding to my DM and reuploding this video, this has been site a game changer for me Taino!! 🤘
Re *uploading
Excellent 👍
Thank you so much for showing the whole process! I have been searching for this for a week!
Great job ! I really like that you really went in depth
This is slightly different than the way I was taught to do it (I invert & adjust the levels before bitmapping), but I like this technique better. Can’t wait to try it out👍🏾.
Are you still in NYC, hmu I'm here and getting ready to retire and your the man who can give me the help that I do need
Awesome 👏
Thanks for the video. I followed step by step yesterday and it came out great. Today, when i clicked cut, the entire image disappeared
We love your vibe ❤❤❤ thank you 🎉🎉🎉
Very nice good job
Very informative!!! Thank you 🙏🏻
thanks for your videos , made me what to try screen printing
Thanks for this tutorial, it really help out.
Thank you for your videos. Would this be able to be done in CMYK?
mazing, greetings from the Malang-East Java Convection
Hi just wanted to ask if the same process applies to as if I am going to print on a gray color shirt? Thank you!
VERY VERY VERY NICE, THANK YOU
Great job! Also for the explain of how to do it. Thanks
Great video and explained thoroughly. Thank you!
you are professionnel good job
How to remove the background white when you're going to print halftone design in Black T-shirt? I just want to print only the subject and remove the background. I followed your steps and wondered how can I do that if I only want the subject without the background.
How do I get rid of the background when doing half tones good video
Hello! What is the better mesh number for details print on T-shirts? Thanks !
This is dope amazing work!!
Hey man thanks for the video, quick question, at the start i import the vector AI file then follow this process - how do i save this as a vector file again? i only have the option to save as a PSD but will this mean it is no longer a lose quality or am i ok?
that came out sick!!!
With the resolution 10x12 in, can I print on an XL t-shirt U know?
Great explanation. I don't use rip software either, as I"m just learning. Thanks!
11 point... SIXTY-NINE!!!
how much is the psi/bar of that high pressure washer your using to wash out the stencil??
clean
Thank you for this very helpful video man...I really appreciate your effort...have a good day.
Maestro where have you been bro?!! You're my teacher and you don't even know it. Happy that you made another video. I hope everything is well. Thanks for dropping some more knowledge on my head. I just bought my first four color press and I still have it in the box. I'm really excited because I was using an ironing board to do one color prints. I just want to say thank you because I learned so much from you
Congratulations on your new press. You are going to love this business. thank you for supporting the channel.
YOUR TEACHER STEALS ART FOR PROFIT>>>> GET BETTER MENTOR OR END UP AS JUST ANOTHER THIEF
When your editing the image size, are you basing it on size of your screen or transparency paper?
How do you print it on the film? What your printer settings?
Your videos are just awesome and informative as always, boss
did you change your exposure time or did you use the same time you always use??
Dope 💯.
Looks awesome!! Trying to get a print to look good and having issues. Saw this video of yours right on time. What mesh screen did you shoot this on?
230 mesh count.
Just a 230. Awesome. I will have my artist watch this video and we will see what we come up with. Thanks for the quick reply and I love your videos!! #slingerprintworks
Thank you bro.
How longvto burn the screen... make avideo on exposure, halftones and regular...
Nice as always
so the grey and white part is more so for the white underbase?
MUITO BOA A SUA AULA MESTRE TAINO INK, GANHOU MAIS UM INSCRITO. MUITO OBRIGADO!!!!
Can you Adjust the size of the graphic after doing the halftone?
Damn I love halftone.....I may cry, not gonna lie.....•
Nice job, hermano!
What soft ware app do you use
I use photo shop
Thank youu so much !!
thank you. may The Almighty Creator bless you
Doesn't matter what time I expose for , my halftones washout . In the same screen it's under and over exposed . I use a hose and they wash out and I try a pressure washer they also wash out ..... ugh so frustrated lol
what frequency use in 100 mesh thanks
Hi Mr. How to make underbase please? Black n White underbase?
Can you do a video on multi-colors using this method
Nice!
what emulsion did you use for this?
Hello, I would like to try this (1 color) on a grey shirt black ink. Do I invert the halftone image like you would do to print on black shirts or not invert. Any help would be appreciated Thanks
Instead of selecting and deleting the black you would select and delete the white. That will leave you with the black image and you don't need to worry about colour overlay.
How long was your exposure
BOA NOITE SOU WESLLEY ACOPANHO SEU TRABALHO SOMOS AQUE DO BRASIL TENHO UMA GRAFICA E SERIGRAFIA MEU SONHO E POSUIE UM CARROSEL DESSE TOP' AQUE E MUTI CARO.
Thank you bro 🙏
Thanks
nice video but you did not show how to save the artwork for printing
Do you use this for CMYK underbase
Can u post of how to print a negative image
How did you burn it to the screen tho?
Can you do this with Illustrator?
What do you mean you only use 230 I saw another video where you used 110 for half tone
Thank you for supporting the channel 🙂 I use 230 mesh count for most of the halftone prints. The video I did using 110 mesh count was to show that it could be done. The only difference is that the dots are going to be a bit bigger.
#SALUTE
Where do I buy the film
thank you!
I'm curious I want to make sure I have the right mesh count. I just got a half tone design and want to make sure I got the right mesh count. Can you please tell me the mesh count.
230 mesh
@@tainoink Thank you
can i do halftones with lower mesh like 100 or 150
Not recommended. If you want to use 150 mesh keep your dots at 35-40 dpi. You can always go to smaller numbers and get different effects.
The conversion through photoshop….It looks like a Black & White Negative..
What's the mesh of this screen?
What if you wanted to make a memorial shirt with texts would the txt go on another layer
You can't add both to one film or print another film with just the text name in which case you'll need to add registration marks.
Thanks
@@darryllparker9298 sorry for typo I meant you can not can't lol
CO-OP CITY YEA YEA
What happened to the 2 color video for this design?
I am going to posted again after I make some correction with the infringement part of the video.
Did you use plastisol or waterbased ink on that halftone?
Plastisol
What's the ratio of emulsion on ink side and tshirt side. Is it good if the emulsion is thicker or thinner?
What durometer is the squeegee?
I use a 70 durometer squeegee
@@tainoink Thank You
I need to be one of your interns
Hello,how can you help me please, I want to now to make underbase Black or white?
Hi, could you please explain why did you chose a dark overlay? I thought you would pick a white overlay to make the artwork look clearer on a black garment.
I did the same as you and found that black overlay completely changes the artwork color to black which is not what someone would want when printing on a black t-shirt!
Yes, he needs the white part to be inked, so he made it black so he can print it on the film to exposure it and then fill it with white ink ! The design on the film needs to be always black so it can be washed away later.
Ink colour name.
Why do people still insist on doing this by hand? Folks go to school for years to learn these programs like Adobe which again why I don't understand why folks don't simply buy an add on like Filmmaker 10 or NXT Sep where all these variable are preprogrammed. Sure these cost money. Example my software with CoralDraw and my add-ons rip this image in under 2 minutes with it being ready to send to printer and this is vector or raster file.
What do you charge for a shirt like that?
It depends on the quantity of shirts the client is requesting. Our minimum is 24 shirts. So one color print on front of a black shirt $12 per shirt.
@@tainoink do larger sizes matter too?
Hi
I live in Bangladesh. I want to learn from you what you have done in this video. Or I want to contact you.
Ajharul Islam Hridoy (17)
Bangladesh