Harbor Freight Greenhouse Polycarbonate Panel Reinforcement
Вставка
- Опубліковано 6 вер 2024
- Harbor Freight Greenhouse Polycarbonate Panel Reinforcement
Amazon USA amzn.to/2t4KXdd
Amazon Canada amzn.to/2Nbnu3m
Amazon UK amzn.to/2EgKOtS
You can help support this Channel by using the Amazon Affiliate links above for any of your future Amazon purchases. I will receive a small commission from Amazon at no additional cost to you which will enable me to produce continuing content for this channel. Thank you for your support.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
July 5, 2024
Hi Tom. I'm just tuning in to your video. It's very informative. I am in the process of putting together my AmeriLife prefab-greenhouse, so I am seeking all the knowledge that is already out there on the issues, and fixes for these prefab greenhouses. You have provided several ideas that I liked and will take to heart. The use of the 1x2x8 furring strips, and the tap screws to hold in the panels are just a few ideas I most likely will incorporate into my plan. Thanks again.
So smart using the boards to brace panels. Your modifications are really good. Thank you for the video
Hi Tom hope you doing ok and keeping well. Hope to see you on your fabulous ASMR channel soon 💜
Tom great idea using the wood slats! I don't have a planer, but I will have to see if I can find something that will work. What you'll find is these panels age quickly, especially on the roof. As they age, their edges get brittle and the clips, silicone, etc won't hold them. Also, as they age, they bend easier as well. The replacememt panels I got from a greenhouse supply company are much strurdier so far.
I have an 8x20 polycarbonate greenhouse that was a kit. I have used 10 tubes of silicone and still haven't done the seams in the roof.
Good video. Just a thought, though. Rather than putting loctite on the screws use nylon locknuts. They're pretty cheap and won't back off.
Very good
Can you repost the link for the part? When I click on the US one, it just takes me to the general amazon page.
I believe I purchased the Neo/Bonded Washers from Griffin Greenhouse Supplies. onliant.griffins.com/hg/searchProdList?pg=1&c=searchIdSingle&contextList=eJyrVipOTSxKzvBMCc7MS89JVbKqViqpLADSUAklHaXkosyS1KLMRKBYeWJxRmpRsVJtLQBIUxQs
Caulking
Would you mind looking at my solution and give me your opinion?
just build the greenhouse out of wood and be done with it. so much wasted time and headaches with that habor freight greenhouse.