Working with RPI 4B and a very old laptop still your way worked very fine you have really solved all the problems . This tutorial is really the great and the best till date i've seen for anything. Thanks a lot and a lottt . Wishing the best for your future and keep making such stress free tutorials. Once Again THANK YOU!! 🙌💕
This video helped me so much when I was stressing about getting my raspberry pi started. Thank you so much. You were very systematic, precise, and simple with your words. Stay blessed Sir!
Btw I used Raspberry Pi imager, and it did indeed help alot. It would install the os (No need to download it from the internet), and is only around 500MB!
In fact you just install it, and chose the os to be installed, and if you are patient the app will format the sd card and install the os. You can also format the sd card quickly: do it by right clicking the sd card drive and format it as FAT32 type or something similar to this name. You are done! However, this video also shows a good way but it quite long. Good video though!
Such a nice step by step narration. Thank you so much. However, I got stuck just after the writing of the image onto the Drive. It gave this message: "You need to format the disk in Drive I: to use it." And also, when I opened network and share, I saw that Raspberry got connected as an unidentified network but when I opened the network and sharing center, I couldnot see the sharing tab.
This video was very helpful. If your raspberry doesn't work after it has worked the first time, just follow the steps from 15:04. In my case, the ip address had changed.( I don't know how but it changed on my laptop. The ports were same but the address changed). I repeated the steps from 15:04 and it worked fine. Hats off to you sir.
Thank you my brother...it is the most in-depth video I have come across on youtube ....I was just about going to give up when I saw your tutorial. you deserved a place in Bill Gates Foundation Trust. Number 1 - Indian most intelligent IT specialist in the world.
i have the problem with the final step when I open the raspberry through putty it mentions an error "network error: network error: connection refused" then click on ok the putty window mentions that "putty (inactive)" how can i fix this?
Hi! Thank you so much for the video! I was able to connect to the raspberry pi follow your tutorial for 2 days. Somehow I can't connect to raspberry pi anymore. I don't know what to do. I followed the same instructions. I opened putty but it doesn;t connect anymore
During the wifi sharing set up. Mine there's extra drop down options. It says select private network connections. And it shows "VirtualBox Host-only Network" , "VMware Network Adapter VMnet1" ,"VMware Network Adapter VMnet8" , "Ethernet". Which one do i pick?
Does this method works for first use? with a non installed os yet, I have the os in a usb flash memory and a laptop, but the connection failed in both cases, with static or dynamic IP address, so where is the real problem ? when scanning the network , i can't even find any other address. thanks
Thanks a lot fam really appreciate your help ,the best fockin video .You don't even know how much this tutorial meant to me like 2 hours ago .Thank you so much and keep spreading knowledge .
Hello There. Thank You so much for your efforts. It Helped me so much. However, after successfully connecting my Pi with laptop, when i turned it off and tried to reconnect it through VNC server, it gives me the following error: "Timed out waiting for a response from computer" Any Help Sir?
I have no "sharing" tab under Wi-Fi Properties, only "Networking." My computer doesn't recognize my raspberry pi4 even though the pi4 lights appear to be all correct.
Hello The raspberry pi network (ethernet) does not show up in my network and sharing center. Hence I cannot proceed with the further aforementioned steps. Can you please help in this regard? Thanks
hi, its a very good video. But iam unable to connectfrom HDMI. I can connect by using LAN cable, but unable to configure the rasperrypi. please help me. thanks in advance
I am getting this error below after typing lxterminal, could you please tell me what am I doing wrong ? thank you pi@raspberrypi:~ $ lxterminal Unable to init server: Could not connect: Connection refused (lxterminal:1273): Gtk-WARNING **: 14:03:53.567: cannot open display:
Hi when I connect the SD card ti the laptop, 4 drives appear, Recovery, boot, and 2 drive (F: and H:). Both recovery and boot can be opened and accessed but the other 2 said it need to be formatted. What should I do and which one should I choose to format? Thanks!! I bought it from raspberry kit and I am not if it is the preloaded one, do I still need to do formatting? Also, I proceed and try to create a ssh file in the sd card but en error 0x8000ffff saying an unexpected error is keeping you from creating the file.
Your SD card might have NOOBS(operating system installer) pre-installed. Format the boot drive. Both boot and recovery drive belongs to your sd card. Make sure your sd card reader is not write protected
i can open it now but after I entered lxterminal, there's an error: (lxterminal:5672): Gtk-WARNING **: cannot open display: I have Xming but still cannot open display
Hi I can't fix this error even i started Xming; Unable to init server: Could not connect: Connection refused (lxterminal:1055): Gtk-WARNING **: 15:37:22.396: cannot open display
dude im having trouble with "connection caused software to abort". I tried setting the null thing, but it didn't work. Can it be due to my connection like my wifi or something. Really need help in this dude. THKS in advance.
Hi, at first it works, then when I tried to open it again the connection say 'timeout'. So I tried it again from the very start, its always timeout. :( Help me pls.
Connect to raspberry pi through VNC viewer| easy way to connect to raspberry pi - ua-cam.com/video/carRkTXv_8c/v-deo.html Connecting an LED To Raspberry Pi, Blinking LED, Multiple LED's - ua-cam.com/video/carRkTXv_8c/v-deo.html
Hello @involveininovation I'm really having a hard time in connection with pi😢😢, for raspberrypi.mshome.net its showing putty error, & xming is shown as"xming server 0:0",I don't understand how u r able to edit txt files in /boot, for me its not even showing 😢 only4 (bootia32.efi, bootia64.efi,grubia32.efi,grubia64.efi)are showing in the boot folder, i have been trying in many ways for 1 week and got no results, i badly need your help, can you please update tutorial, it will be very very helpful, please...
Hi, for my self I have the following error : Network error: Connection refused. I don't see what could be the problem, because I followed all your instructions. Do you have an idea? thanks a lot :)
hello sir ..this is great tutorial ..im facing a problem here.i have connected raspberry pi and my laptop to different wifi but if i remove ethernet cable connected to laptop and raspberry pi the pi is not working .i want to connect my raspberry pi without ethernet cable just using wifi.can u please help me out. Thank you
Hii.. M getting error while writing img file using win32 disk img as device fatal error.. And somtime i/o device error.. M Not getting it.. Plz help me..
Check the drive of your SD card and give the correct drive name. If you gave the correct drive. Check whether you enabled write access to the card reader. many card will have a physical key to enable it.
Every thing was going perfect but during login it took my login ID I gave "pi" as u said and entered "raspberry" for paswrd as I got enter it took 2 sec and then shows access denied . What should I do???
Could you please tell me one thing that when you connect your pi ethernet with the laptop its blink both light of ethernet or not? i have seen that its blink one for my case ..I follow your steps but didn't work
Hi, so every part worked fine until the "startlxde" command. I write it and then get the following msg ** Message: 19:40:14.937: main.vala:101: Session is LXDE ** Message: 19:40:14.938: main.vala:102: DE is LXDE (lxsession:1040): Gtk-WARNING **: 19:40:14.952: cannot open display: What can I do?
big thanks mastah 🙏. in your channel i can connect rasp bi in laptop via rj45. but, if i input the password "raspberry" . the reply is Acces denied. why that? help me please
Working with RPI 4B and a very old laptop still your way worked very fine you have really solved all the problems . This tutorial is really the great and the best till date i've seen for anything. Thanks a lot and a lottt . Wishing the best for your future and keep making such stress free tutorials. Once Again THANK YOU!! 🙌💕
This video helped me so much when I was stressing about getting my raspberry pi started. Thank you so much. You were very systematic, precise, and simple with your words. Stay blessed Sir!
Btw I used Raspberry Pi imager, and it did indeed help alot. It would install the os (No need to download it from the internet), and is only around 500MB!
In fact you just install it, and chose the os to be installed, and if you are patient the app will format the sd card and install the os. You can also format the sd card quickly: do it by right clicking the sd card drive and format it as FAT32 type or something similar to this name. You are done! However, this video also shows a good way but it quite long. Good video though!
Thanks for the tutorial.. I came here after watching many disappointing tutorials.. I found this one was easy
Thank you so much sir.
I was very stressed about not getting it to work, you really helped me out with this, very well explained.
Such a nice step by step narration. Thank you so much. However, I got stuck just after the writing of the image onto the Drive. It gave this message: "You need to format the disk in Drive I: to use it."
And also, when I opened network and share, I saw that Raspberry got connected as an unidentified network but when I opened the network and sharing center, I couldnot see the sharing tab.
Thank you so much this video was a detailed demo it helped me to install the raspberry pi for my project it was of great help
Ive watched a lot of videos but i failed until I came up with this! Thanks man you the best
This video was very helpful. If your raspberry doesn't work after it has worked the first time, just follow the steps from 15:04.
In my case, the ip address had changed.( I don't know how but it changed on my laptop. The ports were same but the address changed). I repeated the steps from 15:04 and it worked fine. Hats off to you sir.
Thank you my brother...it is the most in-depth video I have come across on youtube ....I was just about going to give up when I saw your tutorial. you deserved a place in Bill Gates Foundation Trust. Number 1 - Indian most intelligent IT specialist in the world.
i have the problem with the final step when I open the raspberry through putty it mentions an error "network error: network error: connection refused" then click on ok the putty window mentions that "putty (inactive)" how can i fix this?
P.K.Chamith Nimsara same problem
make a text file name ssh in your sd card
Souvik Versatile oke thanks sir
yeah just too many in between downloads before
set up but its worth the effort
Hi! Thank you so much for the video! I was able to connect to the raspberry pi follow your tutorial for 2 days. Somehow I can't connect to raspberry pi anymore. I don't know what to do. I followed the same instructions. I opened putty but it doesn;t connect anymore
Worked perfectly for me on Raspberry Pi 3 Model B+
can you please tell me ,why my laptop is not detecting the ethernet cable.i also have the same module as yours
lost at around 16:48 ... plugged in hdmi cable and everything but still not able to see the rasbian bootscreen. please help
During the wifi sharing set up. Mine there's extra drop down options. It says select private network connections. And it shows "VirtualBox Host-only Network" , "VMware Network Adapter VMnet1" ,"VMware Network Adapter VMnet8" , "Ethernet". Which one do i pick?
It's been a great help. Thank you very much. Got the right thing in very less time. Thank you once again
IS its working procedure is same with NOOBS OS when installed in the Raspberry Pi???
Does this method works for first use? with a non installed os yet, I have the os in a usb flash memory and a laptop, but the connection failed in both cases, with static or dynamic IP address, so where is the real problem ? when scanning the network , i can't even find any other address.
thanks
Is this good to try for Orange Pi? Or do you have a tutorial for Orange Pi? Thanks alot.
Thanks a lot fam really appreciate your help ,the best fockin video .You don't even know how much this tutorial meant to me like 2 hours ago .Thank you so much and keep spreading knowledge .
Y did u install a SD card formatter u could format directly right??
Hello There.
Thank You so much for your efforts. It Helped me so much.
However, after successfully connecting my Pi with laptop, when i turned it off and tried to reconnect it through VNC server, it gives me the following error:
"Timed out waiting for a response from computer"
Any Help Sir?
Brilliant tutorial!
I do not have an Ethernet port in my laptop, can I share network via W-Fi or is that not possible? I would greatly appreciate your help.
I have no "sharing" tab under Wi-Fi Properties, only "Networking." My computer doesn't recognize my raspberry pi4 even though the pi4 lights appear to be all correct.
Hello
The raspberry pi network (ethernet) does not show up in my network and sharing center. Hence I cannot proceed with the further aforementioned steps. Can you please help in this regard?
Thanks
+1
InvolveInInnovation :finally connected to the Raspberry pi .
Thanks for the proper guidance...
THANK YOU SO MUCH U SOLVED MY PROBLEM
Thanks so much for your help, it means a lot for you to dedicate you time to help us all out :)
hi, its a very good video. But iam unable to connectfrom HDMI. I can connect by using LAN cable, but unable to configure the rasperrypi. please help me. thanks in advance
What to do if I get raspeberrypi name in the advance ip scanner ??? Please help me
thank you for the video. I have been looking at this video seen ever. the most helpful video I ever have seen
HELP! pinging successful, i have the ip of the pi, but PUTTY keeps saying connection refused...what is wrong???
Should i keep the software in SD card or i can format it
Thankyou for the video! This did helped me a lot.
You are awesome. You saved lot of time. Thank you so much
I am getting this error below after typing lxterminal, could you please tell me what am I doing wrong ? thank you
pi@raspberrypi:~ $ lxterminal
Unable to init server: Could not connect: Connection refused
(lxterminal:1273): Gtk-WARNING **: 14:03:53.567: cannot open display:
Hi when I connect the SD card ti the laptop, 4 drives appear, Recovery, boot, and 2 drive (F: and H:). Both recovery and boot can be opened and accessed but the other 2 said it need to be formatted. What should I do and which one should I choose to format? Thanks!!
I bought it from raspberry kit and I am not if it is the preloaded one, do I still need to do formatting?
Also, I proceed and try to create a ssh file in the sd card but en error 0x8000ffff saying an unexpected error is keeping you from creating the file.
Your SD card might have NOOBS(operating system installer) pre-installed. Format the boot drive. Both boot and recovery drive belongs to your sd card. Make sure your sd card reader is not write protected
i can open it now but after I entered lxterminal, there's an error: (lxterminal:5672): Gtk-WARNING **: cannot open display: I have Xming but still cannot open display
Really helpful!!! Solved all the issue.
This helped me so much! But when I connected the hdmi and mouse the raspbian boot screen didn’t show.
How do I fix this?
Same prblm facing...pls reply sm1
Bestest explaining 👍👍👍 but can I use this setting on Raspberry pi 3? A mean is it same
yes. This is Raspberry PI 3
If a use the IP address got from IP scanner in putty, it is not working . guide me to proceed further
Thank you very much bro!!!
when I enter raspberrypi.mshome.net putty is displaying host is not available....
when sharing the network from your laptop to pi there is a dropdown present and selecting any option throws an error. How do I fix this?
Thanks soooooooooooooooooooooo much Brother..!!!
Hi
I can't fix this error even i started Xming; Unable to init server: Could not connect: Connection refused (lxterminal:1055): Gtk-WARNING **: 15:37:22.396: cannot open display
Thank bro. Nice
after pinging my pi ip address on command prompt...it said destination host unreachable. Please help
How can i set up a laptop to not get blocked by pi hole? It keeps dropping calls.
dude im having trouble with "connection caused software to abort". I tried setting the null thing, but it didn't work. Can it be due to my connection like my wifi or something. Really need help in this dude. THKS in advance.
Hi, at first it works, then when I tried to open it again the connection say 'timeout'. So I tried it again from the very start, its always timeout. :( Help me pls.
Connect to raspberry pi through VNC viewer| easy way to connect to raspberry pi - ua-cam.com/video/carRkTXv_8c/v-deo.html
Connecting an LED To Raspberry Pi, Blinking LED, Multiple LED's - ua-cam.com/video/carRkTXv_8c/v-deo.html
Hello @involveininovation I'm really having a hard time in connection with pi😢😢, for raspberrypi.mshome.net its showing putty error, & xming is shown as"xming server 0:0",I don't understand how u r able to edit txt files in /boot, for me its not even showing 😢 only4 (bootia32.efi, bootia64.efi,grubia32.efi,grubia64.efi)are showing in the boot folder, i have been trying in many ways for 1 week and got no results, i badly need your help, can you please update tutorial, it will be very very helpful, please...
Thanks man really helpful
Wifi is currently blocked by rfkill. When i enter lxterminal and startlxde, i get error "unable to init the server"
Does this same method works for windows IOT core ??
Please reply
Not sure.
Hi, for my self I have the following error : Network error: Connection refused. I don't see what could be the problem, because I followed all your instructions.
Do you have an idea?
thanks a lot :)
Did you tried advanced ip scanner as mentioned in the video? Can you try with external monitor? If you have one
I have done all the steps from starting....but I'm not getting the raspberry pi screen ...what to do now?
same here
very good for us
hello sir ..this is great tutorial ..im facing a problem here.i have connected raspberry pi and my laptop to different wifi but if i remove ethernet cable connected to laptop and raspberry pi the pi is not working .i want to connect my raspberry pi without ethernet cable just using wifi.can u please help me out.
Thank you
ua-cam.com/video/carRkTXv_8c/v-deo.html refer this video
Thank you sooo much
What should I do if the Ethernet connection doesn’t show up?
Hii..
M getting error while writing img file using win32 disk img as device fatal error.. And somtime i/o device error.. M Not getting it.. Plz help me..
i have a problem
None of these are working, any other options,?
Thank you so much 👍
Good. Thank you
Thanks a lot for the video. It helped so damn much
rombo nalla video saar. thank you so mach. badkou
which type of cable is used in GCT block
It was really helpful. Thanks a lot.
Thanks a ton bro, you made my day
Epic awesome 👏🏽 nice fantastic fabulous best experience and explanation
Your this tutorial is really helpful. God might bless you, dear. I pray for you..
Keep it up!!!
awesome video, really helped a lot ! Viele Danke !
Very helpful video
Really helpful tutorial. Brilliant explanations.great job.
i am not able to write raspbian os in the sd card by win32 disk manager it shows "file does not exist "after pasting the address.
Check the drive of your SD card and give the correct drive name. If you gave the correct drive. Check whether you enabled write access to the card reader. many card will have a physical key to enable it.
Every thing was going perfect but during login it took my login ID I gave "pi" as u said and entered "raspberry" for paswrd as I got enter it took 2 sec and then shows access denied .
What should I do???
If you are loading the OS for the first time, the default username is pi and the password is raspberry.
Could you please tell me one thing that when you connect your pi ethernet with the laptop its blink both light of ethernet or not? i have seen that its blink one for my case ..I follow your steps but didn't work
i am facing same problem
you are the best!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
wait! i thought you need to add a ssh file???
Hi sir, for the last part, how if I don't have an external monitor to enable the ssh? Can I create a file named ssh without any extension?
Yes. You can.
Thank you. I just made it. Can I use vnc server instead of xming?
You saved my day thank u so much
The default password doesn't work for me.Access denied it shows.
Is this applicable to NOOBS too?
how to do using hdmi cable
What if i use usb card reader?
I hope the idea is to format it in fat32, isnt it?
Then what is the purpose of that special sdcard formatter software?
Yes, the idea is to format it in fat32. There is no special purpose. You can use this software even with USB card reader.
This step not working for raspberrypi3 b+
when i open the ipv4 of the raspberry pi its showing blank! how to fix!
same!
@@LiamRead Use the default ipv4 and use it to setup the Putty!
Very helpful. Keep it up!!
Hi, so every part worked fine until the "startlxde" command. I write it and then get the following msg
** Message: 19:40:14.937: main.vala:101: Session is LXDE
** Message: 19:40:14.938: main.vala:102: DE is LXDE
(lxsession:1040): Gtk-WARNING **: 19:40:14.952: cannot open display:
What can I do?
Thank you was useful 🥰
big thanks mastah 🙏. in your channel i can connect rasp bi in laptop via rj45. but, if i input the password "raspberry" . the reply is Acces denied. why that? help me please
how to get that raspberry screen
unable to download win32discimager
how to connect to raspberry pi without any Ethernet connection( wirelessly) ??