Bauer (Harbor Freight) Oscillating Spindle and Edge Sander Review

Поділитися
Вставка
  • Опубліковано 9 лют 2025
  • A down a dirty review on the new Bauer Oscillating spindle and belt sander.

КОМЕНТАРІ • 25

  • @The_HomeHandyman
    @The_HomeHandyman Рік тому +1

    Thanks for your honest review of this sander. This helped me a lot. Like you, I have a very limited budget for tools as I'm retired and on SS.

  • @zzyzxRDFwy15
    @zzyzxRDFwy15 2 роки тому +5

    If the table won't adjust to 90 degree level to the sander, add washers to the top of the angle adjustment brackets attaching to the under side of the table to get it to get to be able to adjust to level.

  • @diego_villena
    @diego_villena 2 роки тому +1

    Agreed 100% on the table squaring issue. My biggest gripe and honestly making me want to look at the ridgid

  • @jandblawncare8570
    @jandblawncare8570 11 місяців тому +1

    Thanks for the review, did you bother to adjust the 90 degree angle or just leave it. This is one tool I really never thought id be using but Im starting to see its value specially trying to sand curved edges with my orbital sander, I can do it but takes forever and a day. Our area is like most by the sounds of it with Home Depot and Lowes having 35 different saws and routers but no specialty tools like band saw or spindle sanders.

  • @wwmilanl
    @wwmilanl 3 роки тому +4

    Thanks for your review,m I like that Unit

  • @JamesTMillerjr
    @JamesTMillerjr 3 місяці тому

    How many rubber drums are supposed to come with the unit? I asked because I just purchased this today and I have five sanding sleeves but only four drums

    • @gwkately
      @gwkately Місяць тому +1

      The smallest sleeve fits directly over the spindle, and does not require a drum.

  • @h_in_oh
    @h_in_oh 2 роки тому

    Interesting that the smaller Baur/Wen design looks like it rotates in the opposite direction as the Rigid model. Gotta wonder what difference that makes in ergonomics.

    • @keycitywoodworks
      @keycitywoodworks  2 роки тому +1

      Handy to remember that video shows things in a mirror. I’m not sure what direction they spin in relation to each other, but it may just be a visual trick of the camera.

  • @fnafplayer6447
    @fnafplayer6447 2 роки тому +1

    SOLD

  • @dirtycurty1202
    @dirtycurty1202 2 роки тому

    You mentioned about the table not being square to the belt, is this NOT ABLE to be corrected or is it just a pain in the neck to do and has to be done every time you switch back and forth to the belt sander? Is it square for the drums?

  • @elpaisaexplorador9981
    @elpaisaexplorador9981 2 роки тому +1

    Just bought mine i like

  • @colemahaney4208
    @colemahaney4208 2 роки тому +1

    Love mine

  • @h_in_oh
    @h_in_oh 2 роки тому

    Can anyone comment on what is the actual tabletop footprint size (width and depth) of the bottom of this sander?

  • @lifeafterarmy3019
    @lifeafterarmy3019 2 роки тому

    Dude are those ghost orbs or is that dust floating through the video @ approx 41 seconds?? Wanted to make sure your shop isn't haunted LOL. Thanks for the content!

    • @keycitywoodworks
      @keycitywoodworks  2 роки тому +1

      If those are orbs, I’ve got an entire village haunting the shop! Haha.

  • @ReelSpider
    @ReelSpider 3 роки тому +5

    If the table isn't square to the spindle it isn't worth a dime to me.

    • @lincolndotson3613
      @lincolndotson3613 2 роки тому

      You are now 10 cents ahead!! Way to go!!!

    • @zzyzxRDFwy15
      @zzyzxRDFwy15 2 роки тому +1

      If the table won't adjust to 90 degree level to the sander, add washers to the top of the angle adjustment brackets attaching to the under side of the table to get it to get to be able to adjust to level.

  • @jamescook782
    @jamescook782 2 роки тому +1

    I got one and had it about 4 mouths and I don’t use it daily and I turned it on one day and it run for a minute or two and it just quit I checked the plug and it was still plug in no matter what I did it would not run. I did get the extended warranty so I put it in the trash. Will not buy another bauer product again.

  • @Bigdog603
    @Bigdog603 2 роки тому +1

    IT LOOKS JUST LIKE THE WEN WITCH IS LESS MONEY

  • @INNYAFACCE
    @INNYAFACCE 2 роки тому

    looks like they ripped off the ridgid design - lousy dust collection = Major Negative issue

    • @keycitywoodworks
      @keycitywoodworks  2 роки тому +2

      I’m reality, most of these are all made in the same factory and branded to suit each tool company.