Thank you for your feedback. I have already submitted a request for improvement of the instruction manual. If you have any questions or need clarification on the installation process, please feel free to leave a comment below this post.
I have a dumb question. I was installing these on my 2024 Wildtrak. I removed the top bolt on the drivers side and took out the original trail sight. I then put in Mabett driver's side one (yes I installed the weather stripping) and the original top bolt would not thread and tighten down, I have no idea why. I double checked about 20 times it was the right bolt and placement. I even tried the bolt without the trial sight in, and it still wound not thread. It was almost like the hole was too small. I wound up using the bolts provided in the kit and it worked just fine. Has anyone else ever had this happen to them on their Bronco?
I ordered these and really like the TURN SIGNAL. Bright!. But the printed instructions and videos leave a LOT to be desired! You leave out a lot of the difficult stuff. Wiring for this is odd. Why 3 connectors but you use only 1! AND - as far as I can tell - this is NOT dual! I only get turn signals. I do NOT get white running lights. So imho there is some decpetive advertising going on here.
Thank you for your feedback. I have already submitted a request for improvement of the instruction manual. If you have any questions or need clarification on the installation process, please feel free to leave a comment below this post.
These instructions are far better than the pictures in the kit!
I'd recognize that garage floor anywhere!!.....@cupradesign/Xanthus!😉
Ha! Busted!
Can i hook this up to an aux switch?
Looks great 👍
I have a dumb question. I was installing these on my 2024 Wildtrak. I removed the top bolt on the drivers side and took out the original trail sight. I then put in Mabett driver's side one (yes I installed the weather stripping) and the original top bolt would not thread and tighten down, I have no idea why. I double checked about 20 times it was the right bolt and placement. I even tried the bolt without the trial sight in, and it still wound not thread. It was almost like the hole was too small. I wound up using the bolts provided in the kit and it worked just fine. Has anyone else ever had this happen to them on their Bronco?
When will these be available?
Should’ve showed more of the wiring.
I ordered these and really like the TURN SIGNAL. Bright!. But the printed instructions and videos leave a LOT to be desired! You leave out a lot of the difficult stuff. Wiring for this is odd. Why 3 connectors but you use only 1! AND - as far as I can tell - this is NOT dual! I only get turn signals. I do NOT get white running lights. So imho there is some decpetive advertising going on here.
How much are these going for
Found on Amazon and $270 for pair
That was worse than your terrible print out instructions which I didn't think was possible.. congrats