LEGO® Technic™ THE BATMAN - BATMOBILE™ (42127)[1360 pcs] Building Instructions | Top Brick Builder
Вставка
- Опубліковано 19 сер 2024
- ► CLICK Subscribe for new Videos: bit.ly/2SwJpFl
● Measures over 4 in. (11 cm) high, including steering wheel and top flame; 17 in. (45 cm) long, including rear flame; and 6 in. (17 cm) wide.
◙ Year - 2022
◙ Pieces - 1360
#42127 #Lego42127 #LegoBatmobile
Follow us on:
◙ Instagram: / topbrickbuilder
◙ Facebook: / topbrickbuilder
See Other Videos here:
► LEGO® Technic™ Telehandler 2in1 (42133)[143 pcs pcs] & EXTRA Tow Truck | Building Instructions - • LEGO® Technic™ Telehan...
► LEGO® Technic™ Ford F-150 Raptor (42126)[1379 pcs] Building Instructions - • LEGO® Technic™ Ford F-...
► ALL LEGO® Technic™ Monster Jam™ 2022 & 2021 | Jam Grave Digger, Max-D, Megalodon, El Toro Loco - • ALL LEGO® Technic™ Mon...
► LEGO® Technic™ 4x4 Mercedes-Benz Zetros Trial Truck (42129)[2129 pcs] Building Instructions - • LEGO® Technic™ 4x4 Mer...
► LEGO® Technic™ App-Controlled Cat® D11 Bulldozer (42131)[3854 pcs] | Building Instructions - • LEGO® Technic™ App-Con...
► LEGO® Technic™ BMW M 1000 RR (42130)[1920 pcs] Building Instructions - • LEGO® Technic™ BMW M 1...
![LEGO® Technic™ Ferrari Daytona SP3 (42143)[3778 pcs] Step-by-Step Building Instructions | TBB](/img/n.gif)
I bought the batcycle and assembled it today... 3 hours of pure bliss, lol
At least some pleasure 🤣
I got stuck on this one a few times, still progressing though
Keep going 💪
Thanks bro I was stuck on the engine 😁🤟
Glad I could help!
what was wrong with the engine I think I have the same problem and am stuck idk what am doing wrong😅
ps.the problem is that the cylinders won't rotate
I just didn't know how to construct it, are you sure you did it right?
I somehow managed to fix it it😂
Glad for you! 🥳
I have this set, one of my favorite LEGO sets ever
Yeah, that's a nice one, wish to see more Technic from Batman
Ks레고가좋아요
Awesome! 😜
Thank you so much for this build. This is my first lego set, and it took me about 11 hours to build. The first two stages really got me confused. But after that, it got easier and more fun to assemble. Hope you'll do well on your channel.
Glad I could help! Thank you too for your feedback! Yeah, I'm working now on these new sets from 2023
Is there a spare 6007966 piece ?
Oh, this isn't a spare part.
@@TopBrickBuilder I lost the piece. So was there an extra axle and pin connector perpendicular triple piece?
Axle no, but pin connector yes.
I have a problem with putting the engine in
What step is your problem or minute?
I figured it out , I found a Reddit post that had my exact problem. The middle section the black L piece I made to low.
Oh, i see, glad to hear that you have fixed it 😀
@@TopBrickBuilder your vid helped
That's great! Thanks for feedback!
Thank you very much. the video helped me a lot to build mine.
Glad it helped! Thank you too!
the video helps but I see more of your hands than you setting the pieces together of the lego-like Honestly work on that or do you focus the camera so much
Sorry about that, this was a pretty old method, but i'm trying my best
I’m stuck on step 151. It doesn’t seem like it’ll go where it’s supposed to be without something breaking because there isn’t space for the black bar with 13 holes in it to go down so that the blue and red piece could connect to the “L” shaped black piece on top of it. I’ve taken it apart and rebuilt it already. 17:32-17:48
Very weird, mine has fit very well without breaking something
i have a problem on 334 it doesn’t fit
Here is a closer look at this step where you want to install the fender 37:31
Im stuck 4:50 im doing exactly what your doing but it doesnt hit the holes
Try to push the top of pins and then install them, this helps
Thank you so much I was struggling and this helped out a ton! 🙏
You are welcome 😊
awesome
Thanks!
I cant see how you put in step 251
You have to install the top corner of L shape piece in the last hole of the front bumper, but other pieces goes in the bottom of front frame, there are spots for every pin that you have to install
Is it possible that there are leftover pieces in lego package 1?
Yes
Step 85 - 90, im stuck. Not sure why its not sitting flush, it just wobbles and doesnt sit right??
That's right, this part will not wobble after you will install next part at step 93
SEND HELP HOW DO I REMOVE THE ENGINE IM STUCK ON STEP 304
No, you don't have to remove the engine, just add the fender to the body!
Hey after bag 1 I have 5 extra pieces. One of the off white/yellowish bushings, a small gray bushing with a cross inner, a small black cylinder connector piece and a small gray cylinder connector piece.
Did anyone else come across this, are these extra pieces?
I looked back at the build and instructions and couldn’t find where they would have been used.
See here at this minute my pieces that was extra 7:44. So it's ok to have some extra pieces.
@@TopBrickBuilder thank you very much!
Those are the exact pieces I had left over, it was only 4 pieces actually.
Thanks for your help!
Glad to help, good luck with your build 😊
At 8:27 step 64 the L technic brick is going at an angle and i have no clue why it is not lining up with a peg
Try to slow down the video and look carefully in what holes I have inserted that piece
We’re stuck on 130.!!!!! Any help out there!!!?
hi Robert! At this step you have to fit what you have built at 129.
Is the engine supposed to click when rotating or is it supposed to be smooth?
It supposed to be smooth.
Mine isn’t either
Try to check or rebuild it one more time.
@@TopBrickBuilder I think I will
Tell me after that if it worked
Hey i got it for Xmas and it took me two days too put togeter
And you have finished it in 2 days?
@@TopBrickBuilder yes i did
That's a good result! 👍 Congrats!
Built the engine but it's not fitting in its place. What should I do ??
Try to build it again but Step-by-Step with video.
So I’ve gotten as far as the first door. I’ve rebuilt it 3 times and every time i tried to clip it on it always ends up crooked, is it an issue with the door or is it the frame?
Try to do step-by-step by video, maybe you will make it this time.
first time i build the door it was a bit crooked too, then i rebuilt and it was good, but the whole thing still was a bit sideways because of the front bumper at the 180 step
Did you figured out? Finished it?
It's supposed to be kinda crooked
Like crooked with a weird gap at the back?
Hello I built it, but something went wrong. The engine went wrong I think can you please tell me
If you have finished the confection already can't say for sure what problem could be, it's too late
on step 85 it says to side the grey piece in the hole but mine can go in 10:05 -10:10. please mine cant fit I've been stuck on the chair for 4 hours trying to figure it out I love your channel .You guide me for 2 years with legos thx and please help🥺
im gonna figure it out tomorrow
i mean i can do it but look on 10:35 to 10:43 how did u do it without letting the grey thing out of the grey whole?
Thank you man that you love my channel, it means a lot for me! If that grey piece is sliding out on step 93 and you are trying very carefully to put it then seems like the problem is before step 85, and the problems could be with length of that long piece that goes to direction, recheck before step 85 if you made all that piece from direction. Waiting to know if you've solved this.
thank you so much ! U RESPONDED OMG! i will see now if it works
IT DID THX!
No encaja el motor y ya lo desarme y volví a armar todo... Q hago?
Si no encaja, entonces parece que tienes un problema con la construcción del motor o con el bastidor que se adapta al motor.
Ya lo volviste a armar? Yo también tengo el mismo problema 😅
Hey man I need help, Im stuck on step 304 I got the build right but not all of it fits in its right spot, specifically where you did this at 34:36 to 34:46
Did you figure out? It's a part where all these holes are pretty hard to fit...
I got the same problem I built everything correctly but it just won't fit
You have to push top of every pin if it doesn't fit, and slowly to insert this part
@@TopBrickBuilder which part
The part that it doesn't fit
How long did it take you to build it cause I am thinking of buying cause it looks cool
Yes, it looks fierce, It took like 3-4h to build
Guessing the red light brick will work once everything is together. It doesn't seem to be hitting right early on prior to the engine
Yeah, that's right, but you can push the button manually if you want to light it.
I’m having trouble finding the stickers for the dashboard etc. Do you know where they would be??
Stickers should be in the box, check the box.
Hey I’m having an issue with step 93 when I put the roof part on top of the red light for the engine it doesn’t connect properly and if it does connect properly the foof is slanted. Any solution?
Seems like you've made a mistake before this step, you have to recheck all steps before this roof, it should slide easily and to have that + bar in the middle after installation.
@@TopBrickBuilder thank you I figured it out earlier but thanks for replying
Sorry for late reply, what was your mistake?
Hey I have a problem on 304 do you have any methods or solutions how to fix it I mean how to put it on there so I can finish it up?
I've responded to your other comment
Unfortunately for me it only added to my want to build, lol. 😢😢😢😢
You mean the Batmobile?
9:08 not sure what I’m doing wrong but I can’t get (7) grey bars to be at a 90 degree angle.
Try to push top of pin and install it, this helps
im having the same issue and i can't continue mine.@@TopBrickBuilder
If it doesn't line up at 90 degrees, then you have a problem before step 63, are you sure that you have installed in the right holes at this moment? 8:15
@@TopBrickBuilder Yes of course my friend, made sure. Took me legit 7 hours of my time.2 hours to get to that step and then just frustration took over
On 3.39 did you put the long blue piece into the black square because mine isn’t going in
Try to move the confection, the pins too, and push them harder
For some reason on the last part of bag 2 i can’t connect the Lego pieces to the holes. Mine is actually above the Lego piece where you connected them
You mean the black bars with pins that you are installing on the each side?
@@TopBrickBuilder yes
Then seems like your mistake was before this, when you have build the roof
can you help me? im on step 304 and the blue part on the left will not go in :( it's too far left to put it in the hole it's supposed to go in
Seems like you have done a mistake before this, try to check your steps with video 🧐
@@TopBrickBuilder i got it! thanks for responding, you're great 😁
Glad to help ✌️
I have the same problem.. how did u fix it😭😭😭
@@cedricsaintpaul9465 it turns out i built the back piece wrong so maybe try undoing that or just take some apart and take it slow
Thank u bro so much I was struggling so much but your video helped me so much 🙏🏽
Glad to help ✌️
I have a problem at 10:40 it’s won’t stay still at all even when I push the blue pieces in I don’t no if it’s supposed to still move or what😭
That means that you are not installing the blue pins into the L piece with holes from both sides, try to slow down the video speed and try it one more time
Did you run into a situation where you were missing parts? I couldn't find the small package #2 only the large package #2
The whole package no... Just some pieces sometimes but a package no...
Hello! Thank you for the help last time but I need help again, sorry for asking you so like if you look in the instructions, Stage/Level 121, you see that orange circle around piece 6265093? Yeah it say I have to put in piece 4508553 into piece 6265093 and I can't do that :(
Hi Baby Yoda, sure, ask me how many times you want!)) So, that Orange Circle is around piece 4211609 that mounts pistons, so you have to insert 4508553 into 4211609.
@@TopBrickBuilder Dude thank you so much! I GOT IT FROM UR VID!
thanks! i will tell everyone on how good u r! also can i get a shoutout?
Glad to hear that! 🙏 Thanks 😊
Oh, that will be great 👍 Sure!
When I try to spin the engine it doesn’t turn all the way around I can’t figure out what I did wrong 13:27
Seems like you've done a mistake since you've started to build this engine, try to rebuild it more carefully with video.
I’m stuck on step 213 the blue pieces are not lining up properly when trying to attached the front bumper, please help?
That's a pretty tricky step, you have to move with your finger that black holes to fit in that blue pins, move them and it will go the pins inside.
also looking at raz 9800's comment no offense raz 9800 but I'm like 3 weeks in and on level 121 man.But if I'm getting something wrong here, maybe the higher steps are harder.I dont know but eventually, I will find out. lol also Shout Out to raz 9800 (im giving shout out to the people whoo look at this comment lol)
The main problem is with engine, and mounting it, the harder step, but in rest the confection isn't so hard.
Hello i cannot find the brown stick on 2.12
Hi, you mean 6159763 ?
You should have in your set 2 pieces with 6159763 number, if you can't find one - probably is missing in your set, you have to find it in lego store.
@@TopBrickBuilder nvm i found it thanks though
Glad for you, good luck with building! 😉
I'm stuck with connecting the engine to the whole thing it's like it won't go or the Grey bar is to low and idk what to do
Nvm I got it I just had to think for a min
Glad to hear that you have fixed it 👍
@@gabrielsalazar5311 How did you do ? I’m really stuck and idk how to connect the engine 😭
You just have to connect it with that 2 blue pins from back of the engine.
9:50 i can’t line it up and it won’t go in
Try to build this part one more time, like in video, and slowly, and then carefully install it on car.
Same
Try to rebuild it as in the video carefully 😉
So on page 65 when we build that piece and theres a circle on the top what does that mean ?
Do we push it down for the light or do we just push it manually
That's the hole that you should fit the gray + bar, later you will add a gear over there to turn the wheels and to push for the light
Ah okay cause I see that piece won't push the button I'll keep building 😊then and see how it goes
Ok, tell me how it performs
Part 151 I can’t make it fit any help?
Hi, did you fit it already?
I lost the stickers. Where did they come ?
Just in LEGO Store
Hey, I have a question. What do I do with the battery if i’m not using the lights? Will the batteries corrode?
Who knows, these lights are not so long time ago used in these sets.
18:24 that looked like an illegal building hack to me
Why you think so?))
Just looks like it lol
Hehe, i see ))
I can’t seem to get the engine in
Have you finished well the engine?
Part 25:13. The bottom blue parts line up. I can’t get my grey parts to line up with my Black sticks. The holes it goes in, is unreachable. Where did I mess up?!!
If your gray parts are the same size as in video, i mean if you can see from the same angle 2 holes and cross spot then seems like the problem is with something that you have messed up with frame, check that front frame part.
Thank you! Had someone else come over and help! We were both able to spot a piece I had put on wrong! Got it put in the right spot, and it slid right on!
Hey man I have a problem building the engine if you can help me it would mean a lot pls
Hi Omar, try to build step-by-step with video from here 11:21
I need immediate help on 9:15, the grey block ''7'' isn't going in straight, i've tried everything , disassembled and nothing.
What do you mean isn't doing strait? You mean in vertical position isn't going or you can't install it in Black and Red pin?
@@TopBrickBuilder I’ve ended up taking it apart and redoing it all over again, still can’t get that 7-hole piece in straight, I’ve even tried extending the car and trying a makeshift way. Nothing worked out and i’ve seen plenty people comment on the same issue. I’ve then watched your video in 0.25 speed and when i got to that part, same issue. Everything done to a T and nothing worked out.
That's very weird, I had no problems with that, there is still a mistake that mostly does, and that mistake is before this step, maybe you can take some pics and send them on Facebook or Instagram and I will try to help you
I’m having trouble putting in the engine
You mean installing on the frame?
@@TopBrickBuilder I was able to put it on right It was a block to low and a piece under was in the way. Easy fix your video helped me spot it!
Good luck with building 😉
When I try to connect the drive shaft in bag 1 nothing lines up to pin it together 3:36 nothing is align right to make it work right? What do I do
Seems like you've made a mistake, from the beginning, try to rebuild it, you are so far away from beginning, but, this time slowly, and be carefully at every step, this will help you a lot!
I’ll give it a try
Ok, let me know if this worked
8:45
Hi , that part @2:26 wasn’t in my package 😢 I finished it anyway
Hi, you mean that long black piece?
@@TopBrickBuilder ya he's talking about that one, I just got my set yesterday and have the same issue, the piece was not in my bag
@@JoeMama-jd7yb wow, that seems to be a big mistake and problem, you have to ask it from LEGO store 😉
@@TopBrickBuilder will do, looked up a replacement piece, and im going to the lego store later to either get it exchanged or to just buy the piece
You mean the long black piece which has those sharp click kind of things ( I can't explain... ) , right? Because that one came for me so there must be a problem for you guys only. My dad bought it in store by the way so in case you bought it online, there might be a problem with that.
So I’m on page 65/95 my thing that connects the thing seems it’s not long enough,please help!
This gray item that fits into light gray hole it should be a little loose, but it has to fit anyway and make the big long track to move, if your thing isn't long enough then seems like you've done a mistake before this, and now is shorter then it should.
what bag were your stickers located in? i got to the interior part but i can’t find my stickers :/
Stickers was just in the box, apart from bags.
@@TopBrickBuilder ah man, i must’ve just not got any. it’s alright, i just built without😁
Wow, that's very strange, go at LEGO Shop where you have bought, they have to give you stickers that was missed!
I have the same issue today, in my set the stickers are with the instructions in the cardboard envolope
And that's how it supposed to be.
23:36 having some serious trouble here, I can’t it to fit, not sure what to do please help
Im stuck on this bit too did you figure it out
This parts should fit very easy, on that blue pins, recheck if you have build right that top part.
Check if you have built that grille right, it should fit easy on that blue pins.
@@TopBrickBuilder I have tried rebuilding over and over again, it just wont fit.
Maybe the problem is with bule pins that you've installed before? Have you done that part right?
I need help on 33:56 (in this video) or step 299, I have done this multiple times but the right-hand side is too short, to reach in the blue pin Someone help me, please.
That's very weird, i didn't found there something hard, but seems like you still have a mistake when you build this part.
또 1빠임 ㅋ
응 헐
@@TopBrickBuilder 모든 것이 여기에서 잘되기를 바랍니다.
또한 나는 구글 번역기를 사용한다
응 헐
저도요)
its keeps getting blocked by the led block
Then probably your long gray piece from main build is too low, there is a mistake.
Hey 34:52 one of my rear fenders the first one sorry was to short to connect to the main frame of the vehicle just wondering what I could’ve done wrong it frustrated me quite a bit please reply thank you
Every other part fits except the blue connection near the motor in the rear of the car
Unfortunately seems like you've done a mistake, try to rebuild it like in video to gain a perfect result.
Great feedback lol
You can take some pics and send them on Instagram, and i can tell you more precisely where is the mistake 🤔
#42127 #LegoBatmobile
will the 'paper' or wahtever things be useful in the future or can they be thrown away?
You mean the papers will be thrown in future or will not be in sets?
@@TopBrickBuilder i mean would they be useful in for example changing batteries
Hehe, i don't think so 😅
@@TopBrickBuilder ok ty
On 21:33 I can’t get in the hole by the fender do to the line
Try to push the top of pins and insert in that 2 holes
Does it matter if the big red gear is on the right side instead of left side?
The problem could be with wheels that will spin not in the right way, but that would be an interesting experiment))
@@TopBrickBuilder alright, my second time helping my little brother build legos, I’m a noob lol
Happy new year bro!
It's ok) After this Batmobile, you will not be noob anymore 😁
Happy New Year man! 🥳
the engine won’t fit :/
Maybe because some details you have assembled not right. Try to check step by step how it was builded in video.
My red light won’t work
Never mind I clutched up and fixed it
Glad to know that you have fixed it ;)
Piston not working
Just one or all of them?
@@TopBrickBuilder all
Then seems like you've made a mistake when you have built the engine
I need help j can't get that piece at 49:28 the connect properly the the front
Your posted timeline isn't right, i can't see the moment that you can't connect.
You just unstuck me. Engine was jammed couldn’t sort it out.
Glad to help!
help i can’t get to line it up in 8:24 im stressing out rn
Check some steps before that if you've done well
On page 126 when you put the thing is there a black piece supposed to be sticking out or is it like the instructions?
Yes. This page starts here 21:34
3:34 it won’t line up and I am following with the video
Please check every hole that you have fitted, or you have figured out already?
@@TopBrickBuilder I have checked every hole, still doesn’t line up.
Get one part to line up and the other doesn’t great.
You mean the connectors doesn't fit in the holes?
@@TopBrickBuilder yes. I got past it but now the engine won’t line up
25:07 it won’t line up again 😭😭😭
Yeah, it's a pretty hard part, if you've done this part right, then you have to install it very carefully, but if it doesn't fit at all then seems like a mistake in that part...
I can’t get my engine to fit in I’m on step 124 and just can’t get it
You just have to insert that two blue pins in two gray holes, 14:09
@@TopBrickBuilder For me, blue pins doesn’t go in, the gray line is to low, I just can’t. Blue pins goes above the gray line
If it's too low, you probably made a mistake when you have installed that part, but you can try to push top of blue pins to install in that gray bar and after that gray pin with gear ⚙️ in hole.
@@TopBrickBuilder I found it ! It was my L pins was too low ! 😊
That's good that you have found your mistake! Good luck! 👍
My engine doesnt work like that :(
Ive built the whole thing too now
Try to build Step-by-Step like me 😉
After making the assembly at 12:32, I can’t get the crankshaft to turn. It just doesn’t have any room to turn. I’ve checked the previous stages over and over. What could I have done wrong?
You mean you don't have that little light gray thing to turn them like me?
@@TopBrickBuilder I’m not quite sure what you mean. I was being serious. If you don’t have an answer, just skip it.
Even if you are finishing engine, it's not moving cylinders?
@@TopBrickBuilder that’s right. I’ve dismantled and reassambled it at least 10 times in vain.
Interesting... And you are trying to move that gray piece like me and it doesn't turn any cylinder?
2:18 IAM SO FUCKING TIRED THIS LITTLE THING WITH THE HOLE IN IT WONT WONTTTTTTTTT WONTNTNTNTNTNT GO INNNNNNNNNNNNNNNNN
Yeah, it's pretty hard to insert all 4 pins at the same time but you have to push that blue pins at the top a little bit and them insert them into the holes one by one.
I’m stuck on 243. Don’t understand how or why, but this fuckin’ guy does it, just slides right into place. Does mine do that? No.
29:07 to 29:12
Try to push top of connector to slide more easily into the hole
@@TopBrickBuilder I feel like I’ve tried everything, man. I was probably stuck on that for an hour. I gave up, I’ll try again tomorrow though.
Ohh, that's very strange, yes, try tomorrow, maybe it will fit from first try)) You have checked all the holes and pieces from that black L part?
@@TopBrickBuilder Yep. I backtracked in the instruction manual for what seemed like forever. What I built exactly matches what the instructions say. It was pretty damn frustrating.
bro PLEASE help me i cant get da engine in im bout to fuckin cry
Can you tell me more detailed what you can't do? At what moment you are? What minute?
@@TopBrickBuilder bro holy shit thank you so much for your quick reply, i watched your vid like 7 times and realized had a couple of da pins in da wrong place. u helped without even helping, thank you 🙏🏾
Glad to help! Good luck 👍
@@jboog5275 lol, but good anyways
Help me im stuck at bag number 6 😭😭 why does the left one slightly short than right one? Please help
Hey man love your videos just a bit of critics please try to slow down and add voice over next time and no music like a voice guided like your own voice step by step instructions showing it how you would show a teen or kid as it would help autistic adults like me
Hi man, you can slow down the video speed in UA-cam settings at Playback Speed, but I don't like to comment or tell something about, anyway, you are the first one who asks me about voice guided instructions, and I believe that this will not be more informative than now.
@TopBrickBuilder no probs dude thanks for your acknowledgement will keep your thoughts in mind too
Thank you, man, for understanding 🙏