External WD HDD Storage 🖴 Issue broken micro USB ⚡ $0 Repair Fix Recovery Files Safe Data
Вставка
- Опубліковано 27 лис 2024
- Hallo and welcome back on my channel.
I have here the external hard drive with broken micro USB connector.
Hard drive what is inside has PCB version with no classic SATA connector.
It is not able to connect to another computer and copy files.
How to safe our data? It is cheap and easy solution.
All you have to do is remove the broken connector first and then
solder USB four wires directly onto hard drive PCB.
After repair you can still use external hard drive like before.
It´s practically the same procedure as my tablet or navigation repair in my previously videos.
Charging issue micro USB tablet, smartphone
• Charging issue micro U...
Charging issue micro USB Car GPS navigation
• Charging issue Car 🛰️ ...
5 years on and this workaround saved my data. P.S I didn’t remove the USB port and just soldered the wires as you suggested and it worked just as fine.
been searching for the same port for almost a year now. and this video saved me. :D thanks!
5 years still helping lots of people.
Thank You very much! this really works. I have repaired my WD External Passport Drive because of this Thank you!!!
Great tutorial. I read that WD External Hard Drives tend to have broken ports sometimes, AFTER I ordered one myself (only bought Seagate drives before, so I didn't about possible issues with WD's).
At least, I'm prepared if that ever happens (hopefully never tho). The drive arrived today and it's working fine so far.
Thank you very much!
My friend was so stupid and did backups on his usb HDD and after 2 years, he broke the usb connector..
If you guys have problems with detecting the hdd, then supply 3,2v on the second pin from the right side ( shown 1:18 ).. WD mounts some locking shit and unless you supply there 3,2v, the HDD won't power on.. I recommend using a resistor in this case because 3x AAA batteries will supply too much voltage
Did you solder a wire directly on the pin shown @ 1:18 or you found another point elsewhere on the logic board ?
This was brilliant mate, thanks a lot.
Made my day, saved my datas, thanks mate !
You are the best! I do it like you! Perfect!
Exito querido companero, me costo ponerlo a trabajar, al final del video me di cuenta que se podia soldar por el otro lado asi que se volvio mas facil! GRACIAS...
you"re a genius! very good!
Well done.Awesome video.
Thank you I ben 2 months busy aan now I have what I want tanks
I am going to try this soon, what screwdriver bit we need to open the PCB screws ?
Thanks
It worked without removing the PCB and the broken USB! Just soldered straight onto the board. A bit sketchy, I guess, but the data has been recovered.
You are Genius!
Thank you so much for your video, this is some what helpful. Can you make a similar video but with a SSD laptop hard drive please?
can i just leave the USB connector on and still solder the usb wire to the board?
Bro you are king
For hdd
you're accent is cool
merci,je comprend maintenant
Thanks a lot!
Can we made this with other usb cable different from the original one? Thanks
Yes.
I need a similar fix for a 2 TB WD drive, My Passport with a 3.0 USB connection that's been damaged.
Hey can you do one with usb super speed port? Please
Does this same concept work with a Toshiba?
Yes.
at what temperature must i have the hot air solder station?
Can we make a IDE internal hard Disk like same as you have done?
This is the only thing I hate about western digital external HDDs is that they don't have a sata connector unlike seagate.
que l'Éternel te bénisse
0:01, I have same hdd. And i am not facing problem mentioned in the video. But my issue is that i have removed it from cover, and now I can't find any connector to connect 2.5 hdd to laptop or desktop? Kindly help please, i am from India. What is the solution to access hdd.
Data line tracks ripped up when removing connector. I think your two points are to the side that relies on those tracks and I cut the path. Oops.Can you suggest other points to connect to. Otherwise I'll cut the plastic away and trace around with magnifier.Edit: I think they go to a inductor resistor pack. I managed to backup drive but still issues with drive. Think broken joints ,cracks. Design is poor. Weak flimsy connection point.
Kralsın teşekkürler. You king thanks
Do I need to remove the USB connector and just solder the cables on the PCB?
Good job
if I want to make it internal what should I do? Is it taking off the green board?
Unfortunately, you can't bc WD portable hard drives have a native USB connector instead of SATA
Can i also change micro usb to type c?
Very good idea
Hi i have a problem when i connect my hard drive to my laptop i cant access my files the lights turns on i dont know if its the usb cable or the usb port from my hard drive
Very nice
how to do this fix on toshiba canivo basics 1tb external hdd..pliz help
⚡ wow
now i konow how to fix it, but i desperate finding the usb port on the market cz mine have lost, but thankyou anyway
Sir can I get a newone my board little brocken
How do you remove the USB port??
hot air solder station
@@RCompHacks thank you!
what is the black stuff is it silicon
It is hot melting glue, same as the white one
Data cable lost sir
How can I reach u
you mean there is no sata connector on the hdd and only a usb? wow such a garbage
Nowadays external drives do not have a SATA connector inside.
I accidentally dropped my brother's hard drive. It's not working now please help
so how'd it go with ur brother?
Hello, your video is very useful for me. I have a problem with my WD Elements HDD. Data, stored in the hdd, can not be read. To fix that, I disassembled the USB socket, but I couldn't find out where to solder black, white, green and red cables. Because, the motherboard of your harddisc and mine is different. Could you please tell me where to solder the cables based on attached photos? Thank you very much for your help.
Image links ;
ibb.co/kB43RK1
ibb.co/X7XZh40
Did you ever find out? I have the same board.
УЖАС