I had no idea where to start with this. Found your video, bought the bracket from your link plus a t50 thingy, it arrived this morning and I had it fitted in half an hour. Hospital bag packed, baby seat locked in place, ready to go! Cheers!
The little lever you have to flip up (1:38) was totally jammed on one side of mine. I worked on it for about 20 minutes and couldn't figure out what I was doing wrong. Gave up and tried the other side and it flipped up instantly. Thanks for the video!
Thank you for this video. My stubborn husband was trying to fit it while the seat was still in place. If it weren't for this video showing how to unclip the seat he'd have beaten up my car even MORE than he already has. I do wish he'd listen to me every now and again.... I might be a mere woman, but he should have learned by now that I am pretty good at this stuff!
Thank you so much for sharing this. I have a similar ford with no pre installed isofix. I thought I'd have to fork out a lot of money to book in with my local ford dealership to get this done. But after seeing your video it gave me (someone who's bad at diy) the confidence to do it myself. Your instructions were simple and clear and I have managed to install the isofix. Thanks.
Anyone else feel like they are watching an Edgar Wright directed movie? :) But seriously folks.... this video is awesome. No inane yapping and just shows you how to do it with crystal clear instructions
Easy to follow video without explaining obvious stuff and dragging it out for too long. As others have said you will need to buy a Torx T50 separately - easiest place is on EBay or Amazon- picked up a set of bits for £7. Many thanks
Good guide, very helpful! Just as a note for others, my socket set only had bits up to T45, but that still did the job (even though T50 is the correct size)
Chris I was searching for isofix Ford and found you! Great video and solves my problem, am going to order the isofix fitting with the car seat now for when baby is due 👍
You're saving me! I bought a very expensive car seat for my previous car, but i had to change in emergency and got an old Ford Focus without ISOFIX, i was desperate to change the car seat that is almost new !
Just bought a 2008 focus estate as a cheap workhorse only to find theres no isofix! Wtf!? Cant believe it wasnt standard.. thanks for the instructions dude quick and easy
Thanks for sharing this. Received a car that says I should have ISOFIX already fitted. Come to realise I haven't. So if the dealer/seller doesn't resolve it. I will have to do this aswell. Great vid.
I was just about to give up. I have a 2009 ford focus zetec. Both halfords and the ford garage told me it wasn't compatible with ISOFIX - going to go order a bracket now!
Great video. Seen the kit and thought can't be as safe as OEM. Vid clearly shows safe and solid fitting. Guess manufacturers were just saving a few quid. 🙄
Thanks man for a such a short and to the exact point video. :) have the same problem you had. Will try to fit it in 24 hours. I just need a T50 bit. Now max i have is t45, so i don't want to mess it up. Will find a proper bit soon and try to fit it on my Mk2 kombi :) will keep in touch after mounting.
Installed without any problem, thanks for this guide.One question - you did not install that strange sticker which was also present in my isofix kit (2:05 left side). Any idea where this is supposed to be applied to ?
This is an excellent video man!!! Thank you!!! I just buy a new Peugeot 208 GT and it’s don’t has isofix. So I will investigate tomorrow where are those back holes !!! Thank you!
Excellent video, Chris. Just installed the damn devlish thing on my European Focus even though the shitty seat just refused to come off from the other side after unclipping.😑
Still helping people 5 years later. 😜🥹 I’m so grateful! Thank you so much!!! Just bought a new car specifically to start a new job and take my bubs to Nursey and it didn’t have the isofix 🙈 almost a disaster! Again thank you!!! 🙏🙏🙏
Thanks for this, it looks so easy. I tried following the steps, but after 1:45 my seat does not budge. Ive unclipped it from the bracket exactly as shown, but it seems to be just as tightly secured as before :(
Same issue. The hinge/clip moved about halfway back (very easily) but then wouldn't budge any more, seat still locked firmly in place. Did you have any luck in the end or find a solution?
For anyone else viewing, I did finally get the clip to budge, but it wasn't easy. I found I needed to go to the passenger-side rear door, and, while pushing the clip with the screwdriver, pull the base of the seat upwards (and generally jiggling it). Popped out nicely!
You have to move the hinge all the way back until you don’t see the white mark. Put more pressure and when you do the seat automatically comes up a bit
Thanks for the video mate. The first part of the seat you removed, is there clips for that or does it come straight out? I am installing this bracket today any more help would be greatly appreciated!
Hi I know you did this job a while ago but I have just followed your video and all went well apart from now my middle seat belt is stuck and will not retract do you have any ideas how to fix this?
What is exact dimension of these screws? I managed to break one screw during instalation. Other screw went nicely, but the other one simply didn't want to go that easy. 😟
hi mate, i am considering buy a for focus 3 door with a baby on the way but people have warned me a 3 door is bad idea for maneuvering a car seat in and out. What has your experience been like and would you recommend to look for a 5 door instead?
Cian Kerrigan Don’t buy a 3 door. We managed it for a few months but ended up selling it and got a Quashqai. The Ford Focus is ok but the doors are huge on a 3 door and especially as a new born it’s difficult to lean in and over to unclip the seat.
im gonna pretend i didnt see thisw, since i dont need it in my car , my brother can fit it to his though. good vid, i skipped this as a kid and started in backed booster seat till i was like 7 then a booster cushion till i was 10 or 11 then nothing since then
Still helping 7 years later👌
This is the only video that I've come across that has shown exactly what I've been looking for. Thanks a million!
Still helping people 4 years later
Still helping
@@arkadiuszkarbowiak2719still helping 👍💪
I had no idea where to start with this. Found your video, bought the bracket from your link plus a t50 thingy, it arrived this morning and I had it fitted in half an hour. Hospital bag packed, baby seat locked in place, ready to go! Cheers!
The little lever you have to flip up (1:38) was totally jammed on one side of mine. I worked on it for about 20 minutes and couldn't figure out what I was doing wrong. Gave up and tried the other side and it flipped up instantly. Thanks for the video!
Thank you for this video. My stubborn husband was trying to fit it while the seat was still in place. If it weren't for this video showing how to unclip the seat he'd have beaten up my car even MORE than he already has. I do wish he'd listen to me every now and again.... I might be a mere woman, but he should have learned by now that I am pretty good at this stuff!
Nicely edited, just the right mix of conciseness and detail. S-tier DIY video.
Thank you so much for sharing this. I have a similar ford with no pre installed isofix. I thought I'd have to fork out a lot of money to book in with my local ford dealership to get this done. But after seeing your video it gave me (someone who's bad at diy) the confidence to do it myself. Your instructions were simple and clear and I have managed to install the isofix. Thanks.
Anyone else feel like they are watching an Edgar Wright directed movie? :)
But seriously folks.... this video is awesome. No inane yapping and just shows you how to do it with crystal clear instructions
Easy to follow video without explaining obvious stuff and dragging it out for too long. As others have said you will need to buy a Torx T50 separately - easiest place is on EBay or Amazon- picked up a set of bits for £7.
Many thanks
Done this on my st worked a treat and took 5 mins. Now me and the boy can go ripping around
What a legend this is the perfect video! For what I was looking for!
@@bigren3871 You’re welcome 👍
Good guide, very helpful! Just as a note for others, my socket set only had bits up to T45, but that still did the job (even though T50 is the correct size)
T40 wont do the job😢
Just fitted the adaptor to the car, super straightforward thanks to your video.
Chris I was searching for isofix Ford and found you! Great video and solves my problem, am going to order the isofix fitting with the car seat now for when baby is due 👍
Ive just bought this isofix mount and was struggling to understand how it was fitted until watching this video!! Thanks alot mate
You're saving me! I bought a very expensive car seat for my previous car, but i had to change in emergency and got an old Ford Focus without ISOFIX, i was desperate to change the car seat that is almost new !
Cheers mate, hardly needed a tutorial by the looks of it, but saved me working all that first, ta.
Excellent, simple and all what we need to know to install ISOFIX in mk2 Focus. Thank you
Thanks so much. Super helpful!!! So kind of you to put this together as it massively helped me and saved me loads of time and money!!
You are incredibly fast with a wrench, I am impressed.
Thanks very much for your video, we just fitted our Ford Focus with the isofix bar 👍
Just bought a 2008 focus estate as a cheap workhorse only to find theres no isofix! Wtf!? Cant believe it wasnt standard.. thanks for the instructions dude quick and easy
Thanks for sharing this. Received a car that says I should have ISOFIX already fitted. Come to realise I haven't. So if the dealer/seller doesn't resolve it. I will have to do this aswell. Great vid.
Thanks for uploading this video. Made installing the isofix a really simple. It was harder getting hold of a T50 Torx piece.
Really helpful and straightforward video. Mine went in just as shown
Thanks! Got it done in about 30 min thanks to your video, cheers!
I was just about to give up. I have a 2009 ford focus zetec. Both halfords and the ford garage told me it wasn't compatible with ISOFIX - going to go order a bracket now!
Ace. Thanks for the comment and glad it helped
Thank You!!! Watching your video this repair seems so easy so I bought isofix like this and I installed them so easy like You! Thanx!! ;)
hilarious. I look for a post on fitting this and it's the chap I brought an MR2 from 3 years ago. thanks for the video :-)
Lewis Brown Ha ha! How you doing chap? Assume the MR2 has moved on if you're looking into isofix fittings? :)
Chris Newnham it has but to a friend so I still see it now and then!
Excellent help thank you, just installed my Isofix
Fair play dude. I had so much trouble with this. Video was smashing!
Great video. Seen the kit and thought can't be as safe as OEM.
Vid clearly shows safe and solid fitting.
Guess manufacturers were just saving a few quid. 🙄
Was having the same problem. Thanks a lot!
Thanks big Chris! Similar issue. Thought our 2010 Zetec had an isofix which is does not. Shall be doing this tomorrow.
Thanks man for a such a short and to the exact point video. :) have the same problem you had. Will try to fit it in 24 hours. I just need a T50 bit. Now max i have is t45, so i don't want to mess it up. Will find a proper bit soon and try to fit it on my Mk2 kombi :)
will keep in touch after mounting.
I just mounted mine. Exactly like described. T50 and there it is.
Thanks for this video, saved me a fortune and helped me fit my isofix bracket with ease. Thank you sir 👍
Installed without any problem, thanks for this guide.One question - you did not install that strange sticker which was also present in my isofix kit (2:05 left side). Any idea where this is supposed to be applied to ?
Great video! I wonder if does it work for Audi A4 2010?
thanks for the video, i was a little unsure on the release for the seat so this helped me out
Where did you get that yellow clamp fro the floor leg??
Great help in the video
This is an excellent video man!!! Thank you!!! I just buy a new Peugeot 208 GT and it’s don’t has isofix. So I will investigate tomorrow where are those back holes !!! Thank you!
Excellent video, Chris. Just installed the damn devlish thing on my European Focus even though the shitty seat just refused to come off from the other side after unclipping.😑
I'm have the exact same problem. One side is easy the other isn't budging. And it's the side I want 🤦🏻
Hi, tnx for the video...any suggestion where to find top theter in that car??
Thanks a lot! Worked on Volvo V50 since same car anyways :)!
ZAJEBISTY FILMIK, POZDRAWIAM RODAKÓW
Still helping people 5 years later. 😜🥹
I’m so grateful! Thank you so much!!! Just bought a new car specifically to start a new job and take my bubs to Nursey and it didn’t have the isofix 🙈 almost a disaster!
Again thank you!!! 🙏🙏🙏
Thanks for this, it looks so easy. I tried following the steps, but after 1:45 my seat does not budge. Ive unclipped it from the bracket exactly as shown, but it seems to be just as tightly secured as before :(
Same issue. The hinge/clip moved about halfway back (very easily) but then wouldn't budge any more, seat still locked firmly in place.
Did you have any luck in the end or find a solution?
For anyone else viewing, I did finally get the clip to budge, but it wasn't easy. I found I needed to go to the passenger-side rear door, and, while pushing the clip with the screwdriver, pull the base of the seat upwards (and generally jiggling it). Popped out nicely!
You have to move the hinge all the way back until you don’t see the white mark. Put more pressure and when you do the seat automatically comes up a bit
Thanks for the video mate. The first part of the seat you removed, is there clips for that or does it come straight out? I am installing this bracket today any more help would be greatly appreciated!
Excellent video VERY useful ........Thanks
Fab idea! I wonder if it will work on a Vauxhall Astra?
Merci pour la vidéo, ça m'a bien dépanné, je suis vraiment surpris que ce ne soit pas de série sur les ford
would this fit into a Fiesta Mk6?
Thx Chris for this video !
Can you fit this one on a Ford Focus 2013? It's so weird we still don't have them and the local Ford REFUSES to install them
Thanks mate. Big help
Is this ISOFIX Bracket universal for all cars (if they have the two holes)?
Th Theod Afaid I don’t officially know but I doubt it as was a specific Ford Focus figment.
good and useful video, helpful and to the point made the job easy. Thanks
Can you tell me the distance between the two screw holes? I am looking to fit a modern isofix bracket to my 72 Citroen DS.
Does it puncture the seat when you lower in down flat to increase luggage space?
Thanks, mate! Quick and to the point.
Thank you :-) I thought I might have to buy a new car!!
Great video!! Lifesaver
I see the top tether simbol there printed on that small decal. Can you please tell me where is the top tether or third point in that car? Thank you!
Thanks for the great video, i will just do this today!
Thanks for your Extra info about this topics
Any way to buy the guides only? I have the isofix but no guides on the Focus ST and i don't want to buy them from a sketchy website
Thanks a lot
Really useful and helpful 👍
do you know if we can use this one for a ford Fiesta from 2005? Thanks in advance!
Hi I know you did this job a while ago but I have just followed your video and all went well apart from now my middle seat belt is stuck and will not retract do you have any ideas how to fix this?
Thank you for the video, it was helpful :-)
Is it possible to add the isofix into the first seat?
Very useful, thank you!
I actually have an mk2 manufactured 2011 and does not have the isofix. Thanks for the vid
Great video. Really helpful, thank you.
How do you know those bolts are correctly torqued?
Thanks to you I could install it. Thanks!
God job and congrats!!
Very nice. Thank you
What is exact dimension of these screws? I managed to break one screw during instalation. Other screw went nicely, but the other one simply didn't want to go that easy. 😟
hi mate, i am considering buy a for focus 3 door with a baby on the way but people have warned me a 3 door is bad idea for maneuvering a car seat in and out. What has your experience been like and would you recommend to look for a 5 door instead?
Cian Kerrigan Don’t buy a 3 door. We managed it for a few months but ended up selling it and got a Quashqai. The Ford Focus is ok but the doors are huge on a 3 door and especially as a new born it’s difficult to lean in and over to unclip the seat.
@@VanFamilyAdventures ok thanks for the heads up Chris, Ill shop around for a 5 door.
Can it be installed in a ford fiesta 2004? Thanks
It could fit in any model or just Ford?
Thanks mate for video it helps a lot 👍
Helped me out a lot cheers
Nice video mate👍🏽
Merci beaucoup, un bonjour de FRANCE 😉
compatible for Ford Fusion 2006 tdci 1400 ?
Late answer, but yes all MK2 Focus are the same no matter what engine option you have
compatible for Ford Focus C-Max 2006 ?
im gonna pretend i didnt see thisw, since i dont need it in my car , my brother can fit it to his though. good vid, i skipped this as a kid and started in backed booster seat till i was like 7 then a booster cushion till i was 10 or 11 then nothing since then
Muchas Gracias . excelente!! Greetings from Buenos Aires
does the same bracket fit the other side?
Good video man!
Does this also work for a fiesta 08 mk 6
Would this work on Ford Focus TDCI?
How do I remove the two backrests one from the other?
Danke! Gute Anleitung - Einbau hat problemlos funktioniert - 20 Minuten - ok
Spot on. Thank you
Does anyone know if this mount works on a Mitsubishi Evolution 9 2006 model? Thanks
Thanks for this video.