My Favorite Stud Finder: Zircon SuperScan M4
Вставка
- Опубліковано 26 сер 2024
- Featuring new, revolutionary Target Control (TC) Level 1 Technology, the Zircon SuperScan M4 advanced wall scanner is tuned to find clean, wood studs while filtering out metallic false positive objects, such as plumbing, conduit, straps, brackets, or ducts, hiding beneath surfaces. The LoLevel and MetalliWarning Indicators alert to the presence of dangerous, deep, less dense false positives, and metal targets. With the addition of AC Scan mode, users can search for hot, unshielded AC voltage. The SuperScan M4 offers five distinct detection modes - TC, StudScan, DeepScan, Metal Scan, and AC Scan. The screen illuminates pale blue in TC mode and locates the center, edges, and direction of wood studs, while enabling the user to identify safe-to-drill zones by utilizing the new Trust but Verify technique. DeepScan mode doubles the scanning depth to find wood and metal studs beneath extra layers of drywall or paneling.
- Target Control (TC) Mode locates the center, edges, and direction of wood studs, and not nails, or protector plates
- StudScan Mode locates center, edges, and direction of wood and metal studs up to ¾ in. (19 mm) deep
- DeepScan Mode doubles the scan depth of wood and metal studs up to 1½ in. (38 mm) deep
- Metal Scan Mode locates ferrous metal up to 3 in. (75 mm) deep and non-ferrous metal up to 1½ in. (38 mm) deep
- Signal Strength Indicator helps distinguish between shallow and deep targets while in StudScan and DeepScan modes
- Low Battery Indicator for optimum performance (9V battery required, not included)
Liked because you are the reason I passed my Barrie G test 🙏
Thanks for the quick tutorial just brought one
How far apart are your studs? That seemed like 5ft
This is the most frustrating piece of equipment I’ve ever had. If I get a reading and I market when I try to double check it it doesn’t read that spot again. Then it’s got the flashing red so now I’m totally paranoid because according to this my entire wall has got a power behind it. Everywhere. I hate this thing with my whole being. It’s completely ruining my project.
Agreed, this thing is complete garbage. Sure it blinks, sure it lights up, but it’s all over the map and is not consistent with readings AT ALL.
Just bought one for 20.00 on a online auction.
Thanks for the review
Glad I could help
Thank You 🙏
Much needed help 👍
I’ll let ya know if I mess up
my house or not 🤣
Haha 😆
I just got readings and no wood, not the same each time. I’m taking this pos back!!!!
Thank you for the help!
No problem!
I have tried and tried and I cannot get consistent readings with the Superscan M4. Even when using it on a wall where I KNOW FOR SURE the approximate location of the studs, with no electrical or anything else close by, based on the photos I took during construction. I have watched instructional videos, I am following proper procedures, but still the readings are extremely inconsistent. I wouldn't trust this thing at all. I strongly recommend you test this thing out at several locations where you know exactly where the stud is to see for yourself. I am going back to my older Studsensor i65 and throwing the M4 in the trash.
Thanks for sharing. Appreciate it. Good Stuff. Be safe.
Thanks, you too!
Bought one and I had really bad luck with it.
If you’re in metal mode and the screen is flashing red, is it telling you it’s found AC wires (even though you’re looking for metal)? Just trying to figure out the display logic. (This thing won’t shut up.)
Hi i had the same question. Did you ever find out?
@@ReidSwanson_Outside it’s been awhile, but if I recall this thing did seem to find more voltage speaker wire in the wall. So “metal” can be “wires.” Hope that helps.
I know I'm late but yes, no matter what mode you're in it is going to flash red if it crosses electrical wiring purely as a safety feature. Even if you're only trying to find studs or metal pipes you don't want to be drilling into live wires.
Just bought one at the fleamarket for $2.
Is it me or does the battery not always sit properly and cause blinking errors? Sometimes I can't get it to calibrate unless I take out and re-insert the battery. Any tips?
Just bought this and all of does is flash. Returning this turd tonight
This thing works great for me. I’ve noticed the battery doing the same thing for me, so I just replace with a brand new one and no sweating it. Otherwise it’s been a dream, especially working in older homes and helping out friends and family. I would return and get a new one if it acts up like that though, zero problems. Straight forward. Your ole’ lady can use it. 🎉
Can this find framing studs through exterior stucco walls?
I have the zircon superscan ID model that will light up green for wood, blue for metal, red for live wires, and yellow for plastic. Sounds great right ?!!! Nope, its all over the place, and cant remember how many times its been not just wrong, but WAY wrong. It is pure Ga-garbage!!
Crap!...NO Good!!! Stud finder!!!
No stud finder is perfect but this is one of the 2-3 best there are