Tilta Nucleus Nano II side handle & RED Komodo X Cage
Вставка
- Опубліковано 5 січ 2024
- Tilta nuclues nano II side handle video featuring the Red Komodo X cage from Tilta.
Tilta Nucleus Nano II: amzn.to/3RGKQzC
Tilta Nucleus Nano II control Handle: amzn.to/3NRZRNU
Tilta Nucleus Nano II Motor: amzn.to/4aQ0JfZ
SUPPORT MY CHANNEL WITH MY LUT:
Summer Vibe- geni.us/By0ro
Morris One- geni.us/WmROs
All my sound design was using:
EPIDEMIC SOUND- geni.us/LiAO
Thank you for watching my video. YOU make these videos happen from your support so please like, share and subscribe if you already haven't.
MAIN CAMERAS:
Sony FX6: geni.us/SPr5RR
Sony FX30: geni.us/9snxhw4
Sony A7IV: geni.us/xa7Vw
Sony ZV-E1: geni.us/oV6O5
SECONDARY CAMERAS:
Sony A7III: geni.us/sfBgW
Sony ZV-1 M2: geni.us/nxbkbAC
Sony a6000: geni.us/BwB7csw
DJI Mini 3 Pro: geni.us/Fidtn
DJI Mini 2: geni.us/B4OStvI
=============================
Film Making GEAR
Digitalfoto Thanos Pro II: geni.us/YwuIVl
Digitalfoto Thanos SE: geni.us/bDqzEA
Neewer Tripod: geni.us/ZqYs2
Sirui Tripod: geni.us/bmlo
DJI RS3 Pro: geni.us/ywYX1b
FeiyuTech Scorp: geni.us/2KPTgf
Zeapon Micro 2 slider: amzn.to/2wsu1D4
=============================
LIGHTING:
Nanlite Forza 300B: geni.us/lCvr72
Nanlite Pavo tube 30c: geni.us/CzR2WVc
Godox VL 300 COB light: geni.us/McrXZ
Godox SL 200w ii COB light: geni.us/Efd0lAu
Godox M1 small LED RGB lightL: geni.us/QbSBcx6
Neewer 120cm Soft Box: geni.us/Bi4FWv
Neewer C-Stand: geni.us/zHaDHM
=============================
APS-C Kit:
Sigma 16mm f1.4: geni.us/WhQXd
Sigma 30mm f1.4: geni.us/xo7WGn
Sony 50mm f1.8 OSS: geni.us/MYLidN
Sony 18-135mm f3.5-5.6: geni.us/xuwV2h
Sony 18-105mm f4: geni.us/NlNTm5y
=============================
Full Frame Kit:
Sirui 50mm T2.9 Anamorphic lens: geni.us/83FRc4h
Sony 85mm f1.4 GM: geni.us/4ApmMI
Sony 50mm f1.4 GM: geni.us/749KlX9
Sony 35mm f1.4 GM: geni.us/60fWV
Sony 24mm f1.4 GM: geni.us/ZE31znC
Sony 24-105mm F4 OSS G: geni.us/Jr3ED
Tamron 28-75mm f2.8: geni.us/TH1sN
Tamron 17-28mm f2.8: geni.us/tcq2483
Sony 28-135mm f4 Power Zoom: geni.us/tuaQf9N
Sony 85mm f1.8: geni.us/MFI7j
Meike 50mm T2.1 Cine Lens: geni.us/OAc2J1
=============================
Sound Studio Set up:
Synco Mic- D1: geni.us/YA1Oz
Zoom h5 recorder: geni.us/TkqJ8
Outdoor Set Up:
Rode Video Mic Pro Plus: geni.us/JC1a
=============================
DISCLAIMER:
=============================
Companies send me products to review and they by all means do not tell me to say anything about it being a positive or negative review. I review all products with my own personal opinion. If a video is ever sponsored I will make it clear.
Affiliate Links:
=============================
Some of the links in my video descriptions are affiliate links, which means, at no extra cost to you, I will make a small commission if you click them and make a purchase. - Фільми й анімація
Curious if you could attach just the handle to your rig as a side handle? If so what would be your recommendation on how to mount it?
I discovered TILTA 6 months ago, got handles from them and a cage. Found their products of top notch quality. LOL not to long ago spotted an office out here in Burbank CA. I was like wow! They bring their products to the USA. Saw them at the NAB Show in Las Vegas cool stuff.
Good on you for talking so seriously about the need to be careful with your power accessories.
Ive fried so many of my cameras, you gotta be SUPER careful anytime ⚡️is involved.
The Nano ii motor and control wheel are a big improvement over the original Nano gear. The Nano ii hand grip is a mixed blessing. Mine came without a manual and it took multiple emails to Tilta to make sense of it. Ii absolutely LOATH the ridiculously tiny LED screen, as it is barely visible. I fear it was fade out like the one on the original Nano ii control wheel, which always also difficult to read. I also find the Nano ii control handle ergonomics are flawed due to the overall small size of the handle.
yea i don’t understand this company’s obsession with shitty screens i’m sure it was to save money but what a piece of crap it’s almost laughable how tiny and unreadable it is
The last update to the nano II added support for dji focus motors would be nice to see how you pair them up. They have also put a limit on how many times the motor will turn if it doesn't catch the gear ring properly, before you just had to kil power or it wouldn't stop.
I will have to check this out
OH DID IT OKAY now can we get the dji motors to also run off the focus handles lol
@@SHVWNCOOPER When the Nano II was first getting released one claim was it would work with dji motors (small print this will be possible in a future firmware upgrade) well the november firmware didn't have it but according to the December firmware release notes this release does. another handy feature the nano II has is a record button that works via bluetooth on the BMPcc 4k for one, where as before you could hook u po say the rs2 with usb and get camera control but that left the usb-c port tied up so you couldn't have an SSD drive hooked up and record to that which meant expensive c fast cards or slower sd cards or the hit the record button to start now get the gimbal back in position to actually film what you want... The advanced ring grip handle also supports the nano II motors. The putting them in pairing mode can be a total pain e.g one lens i have zoom and focus but the gap between the 2 motors is too small to put them both in pairing mode in position so instead its a case of moving the front most motor put both in pairing mode pair then put the front most back into position and then hit the not the record / power button for 3 secs to calibrate both motors... A manual would be really good to have at this point as i'm really good at making random a-b points and can't figure how to clear them. I'm also trying to find a vnd filter frame without glass since i figured a method to apply a gear ring to a vnd filter but not to attach it to a mattebox as well.
@@SHVWNCOOPERwithout a gimbal?
Jason I have a question? Can the joystick in Side Handle also move the little frame in you are in Continous Autofocus-SpotFocus?
Dreamt of the Nano II and still haven't bought one. Can't really put my finger on why I'm not buying one. As a Canon C70 user I'm just not entirely sold yet, but not sure if there is any comparison for the money? As I also use ARG a Tilta motor feels more logical, but Dji motor fits the RS3 better. All the options...
og komodo user - i hate the new design it's going to force me to refigure my gimbal setup.
i have tilta setups on all my rigs, from the red to the blackmagics, i just feel like someone isn't thinking a lot of the designs thru esp with the cage designs. i'm on my 2nd nano motor now but the newer model you're using had so many calibration and failure issues i had to return it so i'm hoping the bugs are kinked out soon. i need the extra motor cuz i am a solo shooter and pull my own focus. i'm trying to rig the extra motors for zoom and focus when i use the dzo glass and struggling lol. welcome to the red side tho bro.
Sweet setup! Do you use a dovetail with the LWS baseplate? Or just attach it like that to a tripod baseplate?
.. how did you solve it ? Isn’t it annoying of these dudes creating videos but never answering ?
Are you using the Tilta Tiltaing 15mm LWS Baseplate Type IV with your cage?
Hi Jason, nice video! Do you think the Tilta breakout box will *never* be RED approved? Has it been out long enough for that to have been approved? Also, why do you have the DZO Catta zooms over the Laowa zooms?
honestly I have no idea what RED will approve. Certainly new to that system. I have both the DZO catta zoom and the Laowa Ranger Zooms. The Laowa ranger is slightly sharper and better build quality in my opinion
@@JasonMorrisphotocinema Thanks, I know that was overboard with the questions. :-)
Thanks I really appreciate you taking the time to answer…
Do u still have the og Komodo ? Tryna figure out if this cage fits on there as it’s pretty much my only online store option :(
They should add a LiDAR to the Nucleus Nano II
Is it just me or are the links for the items in the video not in the description?
onto it! thanks for spotting that
We are waiting for a lidar solution for the autofocus
Chrck out the pd movie lidar.
Tilta do have their lidar system already
@@JasonMorrisphotocinema Wait, what? Never heard about that. Could you kindly explain about Tilta's Lidar system?
@@msd835 wait I was thinking about DJI when I wrote that 🤦🏽♂️ so similar. DJI lidar system
Hahaha no worries man. Keep up the good work!@@JasonMorrisphotocinema
👏🏿🫡👏🏿☕️🫡📸
thanks for watching