Installing and test. Ducati Panigale inspired speedometer for Z200s/x
Вставка
- Опубліковано 21 жов 2024
- I forgot to cover on the video, after you're done editing with the settings, just turn off the ignition key to save. By the way this demo unit is already sold. But there's another one coming. Just PM if you're interested on my Facebook account TJ K. Han. Have a blessed day everyone 😇
Hi. Where does that button connect to so you can go in to master settings? Thanks
@@MrSmithToday the button is attached to the main unit via 10cm approx wire length
Sayang lang di nila nilagyan ng volt meter at di pwede stock speed sensor
do you have cable diagram for this?
Can you send me information about all the colors for all the cables?
They would be very kind of you if you could make them! 😊
It's easy you just need to connect the meter to a 12v supply. Black(+) and Green (-). Then tap another set of + and - wires from the 12v supply this will be your tester probe. Just test each socket with + or - wire and see which indicator will light up on the dash. Then label it accordingly. Ex. Orange for left turn and sky blue for right. Dark blue for highbeam. Brown for check engine. Blue and yellow stripe for RPM. And so on...
Good friend, I would like to know if this dashboard can be used in a motorcycle with a larger displacement and that uses fuel injection, such as a Honda CBR, thank you
Did he ever contact you and give u any info on the cbr with this? Or any info you found out on your own please let me know bro please
@@andrehemenes3186 No, I am still not sure that it works and that is why I have not bought it yet
@@cesaraguilera3124 I just order one , there about a 100-125 bucks . I’m trying to put it on a 2007 cbr 1000rr . There is no diagram for it or instructions but I’m thinking the biggest problem will be figuring out how to fit the speed sensor
@@andrehemenes3186 The CBR 1000 from 2007 is very similar to mine, if you can make it work, please let me know. However, I think the biggest challenge would be to get the rpm meter working correctly and how to measure the water temperature. The speed sensor is easy; it is enough to place the magnets on the wheel equally spaced and indicate to the device the quantity of magnets used and the external diameter of the wheel in question
Just bought it but the center TFT screen was blank and no display when turn on. All other indicator lights (turn signals, high beam, water temp, etc) keep on. Had turn off and on several times but still not solved
Return to the seller. Defective unit
Plug and play wiring neto boss sa z2??
San po may nagbebenta neto
Sa lazada ko nabili
@@tjthenovicerider1138 may link po kau idol
s.lazada.com.ph/s.fEaAL
@@tjthenovicerider1138 thank u very much po 😇
San ka bumuli paps? Tru lazada din?
Yes paps
Solid!
Void ba warranty pag nag ganyan boss??
Yes po
Suitable for motor use cdi or ecu
Applicable for either ecu or cdi units as long as the bikes has no ride modes or navi system (like Kymco Nodoe)
Fit a Nsr 125 ? Hope so i just grabbed one for 50£
I should. With proper rewire.
Ok paps astig
How many cylinder this Motorcycle?
You mean the bike being used in the video?
nagpalit din ako speedo meter pero hnd nko nagpalit ng sensor
Hello
How do you connect and display the speeds please? greetin
First you must test your stock panel with a 12v power supply. Label each wires with corresponding function. Second do the same with the universal panel. Now arrange the wires within the socket exactly how the stock panel was supposed to be (consider also the length of harness). After that you can plug it ready to your motorcycle. Note that this panel uses its own speed sensor with 2 magnets, you must install it near the front disk brake.
do you have a complete diagram of the connection you made please@@tjthenovicerider1138
@@philippekawa7022 i don't sir. Because every bike model have a unique wiring arrangements. So you have to figure it out by using an external power and see if with indicator will light up on which wire
@@tjthenovicerider1138 too bad my concern was for the connection on the negative card the display of the selection of speeds 1/2/3/4/5/6 on the meter thank you for your help and your reactive answers thank you very nice day to you
@@philippekawa7022 normally on any bike or aftermarket panels, the gear position wires are bundled in one socket.
Goodjob paps.
Meron ba itong mode indicator? like Sports and Eco mode?
Sadly wala po
Available? What fb
Currently not available
can it be installed in cbr1000 2004?
Can't answer sir im not familiar with that bike
hindi ba compatible ang stck speed sensor paps?
Ayaw gumana eh
@Pableo Calmerin Escabarte pano po ko ginawa?
Boss nag install kb nyan speedometer n sa video..
Dati boss now wala na me stock eh
Pa shout out naman dyan paps Fourth Gear Motovlog
Sige paps me next vid pako😁
Sir saan po nakaka bili nyan?
Paps tanong ko lang kasi diko nakita sa vid.. Plug n play din ba yan sa stock speed sensor ng z2s?
Nope me sariling speed sensor po yan
Plug in play na ba sa motor naten yan paps.
Penge namn diagram.
Me video me nung pagkabit sa malaki na speedometer paps andun ang layout. I screen shot u nlng. Monday pako balik sa work eh andun ang drawing
Una sa comment! Haha
pabili aqu paps hehehe
Yang demo unit binenta ko na 4500 😁😁😁 me parating pa me