Thank you for explaining 0 Gap so a non barber school, non pro can understand the terms and various pros and cons of the tools you use every day. As a carpenter, I could do the exact same with Saws, Chisels, Hammers, Drills etc. because I buy and use and keep certain ones for how they perform out of the box, to 40 years later. I love how you threw in mentioning that little sprayer in the end too.
It’s great to hear from someone who has years of experience with the clipper. Was looking for the best clipper to upgrade my home cuts from the shitty old remington I’ve used forever. The tips about ceramic blade and magnetic guides and links were extremely useful. Thanks!
UA-cam Barber Academy Yo Bro.. is it normal that my Fast Feeds are getting hot? I just bought them and used them for the first time today. They are not super burning hot but hot enough that my son says “it’s hot”. And that’s one of the reasons I bought them. All the good reviews and the fact they don’t get hot from what I’ve seen. But after trying them.. I don’t know if it’s normal or if I should send them back? I did change the blade to a ceramic blade by the way but I wanted to ask a barber because I’m not one. Any knowledge on this issue?
@@wearewarriorseaglesjaguars6342 Well if you áre cutting for an hour, yes it gets hot, but less with a cerámic blade. All clippers gets hot if you uses for a long period of time.
Bro thanks so much for pushing this clipper. I finally bought one again and put on the ceramic blade and man it’s a game changer! My blends come out softer and it takes me less time fading
That's crazy, I was given my fast feeds from a barber I worked with cause he said the pulled. That ceramic blade makes all the difference. He seen me using them making buttery fades and he was like how did you fix them
I have the ceramic blade on mine, and I started to really like cutting with them, but then they started pulling. Is it probably just that the ceramic blade is dull?
You always give the best detail information and descriptions. Keep up the great work. This help so much.. very informative. I went back to my Fast Feeds too. This time when really checking them, the fast feed give's a beautiful fade, there's no comparison.
This was my go to clipper . I could run it for 13hrs haircut after haircut , with just some spray , and not heat up or give out on me. Most durable clipper I’ve had in the past compared to wahl or andis. I’ve dropped them plenty of times and they would hold up like champs ! Like any clipper though , they had some drawbacks. The lever would always give out , so much so that even at the salon supply they wouldn’t have anymore levers to sell. We have to wait 2 to 3 months for the next shipment. I even had to improvise and took the lever out and stuck t outliner screw in there to hold the blade tight enough so it wouldn’t open while cutting. I use to open and close it manually with my palm lol. You gotta improvise sometimes. I noticed that it was just a little plastic piece that moves the blade up or down. Pretty poor design on that part if you ask me , after so much wear and tear that little plastic piece will just tear off. I’ve always wondered why not just make it with a metal or aluminum lever since it’s an occurring pattern on most fast feeds. Or at least harder plastic like in the wahl levers. Have you had the same problems with the lever ? If so what’s your solution to it other than just buying a new lever. I know they’re inexpensive but when it tears on a Saturday like around 3pm and you don’t have time to just stop and go to a salon supply it can be pretty annoying .
CRAZY Truth! I don't a lot of time in the Marine Corps, I cut my hair simple-ALL OFF. when time is everything, hair prep in the morning was wasted time. I spent...WASTED money on more cheap Wahl clippers than I can remember. Fast Forward... Outta The Corps but STILL rock the Mr. Clean. My Dad was a barber over 20+ years both in and out of The Navy. He told me years back, INCREASE IN OSTER! he retired and have his Oster set to the incoming barber he trained. The Fast Feed was my 1st Oster clippers I bought November 2018. I was blown AWAY. I Did the Andis Ceramic mod, Zero-gapped, and haven't looked back. I just wish I knew about this setup years back!😏
I used a pair of these in barber school I didn’t like the feeling in the wrist but I’m thinking of buying another pair cuz they did knock out the bald line good
I’ve been watching watching a lot of reviews on clippers and these oster fast feeds really caught my eye ur review is definitely the best u explain so we’ll. I’m a beginner barber and am trying to save up enough money to get my hands on these. Thx for ur help
Coming from whal cordless seniors and magic clip my fades are faster and crispy!!! Spent alot of money on clippers and finally i coped me some topaz with a ceramic blade and dam! These are all i need for fades now definitely a great clipper for the price.
@@UA-camBarberAcademyalways hesitated in buying them was stuck on Wahl these are just a beast love everything about them from the long lever throw to the quietness and 1st gen gaurd system .. thanks for all you're vids tips and knowledge !
@@MrJGSTA I went back to them also omg with a ceramic blade beautiful buttery blends don’t care to pick my seniors again and I lucked up on the 1st generation gaurds
@@tydeshawn125 For real been rockin with these and my new corded masters had to go with corded so much quieter then the cordless and honestly with those 2 thats all I need in the shop and the cuts come out fire 🔥
I know what you mean . I still have the firs set of nano guards. They are perfect. I have a new set now and the are flimsy, have less teeth and the magnet separates from the guards. I had to glue them down .
Greetings from Tijuana, Mexico. happy 2019 bro thanks for all that helpful tips and info I'm a beginner but, I'm now understanding more how to fade and cut, srating to feel good about that. man take care and God bless you
I don't know if someone answered this, but did the Fast Feeds come out around 1985-86 (so mid/late 80's)? I started out then and I thought they were new, up until then I had only seen Oster Classic 76's and the only adjustables were Wahl and Andis. Thanks for all your videos and reviews. This one is great, especially knowing how the ceramic blade improves performance.
hey man your growing on me your starting to be one of my regular youtube guy . like jeez and bosio the video that got me is the clipper over comb one. i see your a guy that get high debt into expelling thing and that exactly what i need man. keep em coming.let talk about the bottom line from the tripper to the zero close i have trouble removing that line, also how to remove dark spot in a fade. i faded this guy up using all the basis step but i still see dark spots from that zero close to the 1 close how do i remove them lines. thanks
Awesome review the fast feeds cut really well with the ceramic blade but I also noticed the blade will loosen up and slip out of place once in awhile and I’m not sure why that is? Does anyone have this problem or know why this happens?
Nice one bro... got everything but the ceramic blade... is that why the body of the clipper gets so hot after only two cuts? Plenty of oil on the blades too
Awesome video mate! I realised coz I do a lot of straight hair - I needed to put the ceramic blade on it. There’s a couple of ways to install the ceramic - which way / video do you recommend I follow? Cheers🙏
They use a ceramic blade so they can zero gap the blades the ceramic blade allows you to line the teeth up to make the blade cut closer …me I like and left my original blade it comes with
When I first got my pair they were fine and i put the andis coarse cutter ceramic blade and after 2 months the blades started getting loose when cutting long hair and i have to tighten the screws again but it doesnt fix the problem. and it makes a loud noise
Mine makes a noise not as smooth as straight or off the box? They fell once ,the smooth buzz is gone. I've been inside nothing's broken or cracked. Hope u you could assist me in getting my smooth hum back.
Hey is this setup good?Thinking of starting to cut hair, i’m 16 and my friends r going to let me fade them for practice. Andis Profoil Shavers Andis T Outliners Oster Fast feeds or a cordless Wahl Magic clips. Can’t decide between the two. Also where would be the best place to purchase my supplies?
nathandejesus unless you can drop $300-$400, just get Oster Fast Feeds, Andis Ceramic Coarse cutting blade, and Andis double magnetic guards. Get used to cutting and grow a strong foundation. Then you can start investing in more equipment. You can use any ol shaver from Walmart/Walgreens like Panasonic or Braun, which are inexpensive. And don’t forget to buy disinfectant and Santizers like Barbicide/Clippercide.
for beginner I would take the magic clips. Fast feeds are exactly that they are for quick cutting. I would recommend that you do basic haircuts like 4 all around or 3 all around to understand the motion of holding the clippers, and understanding the lever.
I zero gapped my fast feeds with the course cutter and it works good only problem is when I open the lever all the way it makes a loud noise any tips to fix that ??
I fix ir removing some material (I sand it) from the back of the blade, the opposite side of the blade, and push back this metal thing that holds the plaatic sky, unscew it push ir down, scew it back.
Hey man been really watching your channel definitely a lot of great info that most barbers won’t or don’t talk about but I started out using wahl guards but everyone mentions the andis guards with fast feeds....what is the difference between andis guards vs wahl is it worth changing over? Thanks
Mr Eddie. I ordered my fast feeds today from Atlanta Barber Supply online along with the Andis coarse cutter ceramic blade and the Andis purple double magnetic plastic guards. Can't Wait !!
I had heard that when you install the ceramic blade you have to get some sandpaper or file and Sandy plastic edges of the fast feeds a little bit so the ceramic blade can move freely
mine broke the first time i dropped them. The plastic by the lever broke. Just ordered a set of magic clips but havent opened them yet cuz after watching this i might return them and replace my feeds instead. Got any advice?
Thank you for the information. I’ve had my fast feed for over ten year’s but the screws unscrew when I use it do you have any suggestions for me. Thank you in advance
So first off thank you for the pro tip been struggling to zero gap my fast feeds so thank you 🙏🏻🙏🏻 only problem now is my 0 guard pops off every time I turn it on. I use the double magnetic andis guards.. I’ve tried adjusting the blades a thousand times can’t figure it out.. any tips? Or other guards I can buy??? Preciate it
You have to move back that piece of metal that holds the kind of plastic sky, unscrew ir hold it down while you screw it again. That push the blade a bit down.
Are these just for fading? I got a pair, put the ceramic blade in and started with a #2 guard. The client had pretty thick dense hair and it just wouldn't cut through it. It pulled so much I stopped right away and had to switch clippers... Am I missing something?
Man what do we need do for a chance to win the clippers . I just dropped my master while I was cutting a man's hair at school and they broke smh couldnt even finish the haircut my teacher had to come Finnish it lol one of the most embarrassing days of my life. So I best believe imma do whatever to enter to win
Say Dawg, Can You Help me with something,.. I Have to original Oster Fast Feed and I Noticed the clipper blades are (Like you mentioned,) Sticking/Freezing in my hair and Not Cutting Through (Like They did when I First Bought Them) My Hair Length is Like a 1.5, Is There a Solution To This Problem? What's The Best Blade combo For ZERO gap and Anti-Rust? Please let me know Stay Safe & Healthy Brotha!!
Oster should just start making them with the ceramic blade on them and get rid of those cheap slide on guards that come with them. Im sure their sales would go up
Mann I feel u on this! I bought a pair of limited edition fast feeds and I did not like them because I tried to zero them and it didn’t happened so I sold them now I want to try them again but the original , I don’t know if there is any difference bt the two but I will invest once more in the fast feeds!👊🏾
Hey what’s up Eddie , somebody else mentioned in the comments about after putting the ceramic blade on the Fast feeds getting hot fast and it making a noise when you fully open it it sounds like the bottom of the cutting blade touching the lever mechanism, is there any thing i can do to fix it ?
how can i tell if my oster fast feed is the crappy old version? it has the silver emblem vs the newer black emblem but i can’t tell how old it is, i bought it used , thanks
I'm back again Eddie, the knowledge you're dropping in your videos is priceless! I have a fast feed with andis ceramic blade but it's longer in the middle. Have you ever had this? I'm thinking of trying another from your link to hopefully get a straight one! Do you think a longer middle will make a difference in the cut? Let me know what you think cheers
The Andis ceramic have that defect of being uneven. I used to have one like yours. I recommend buying a non-Andis brand from eBay or Amazon as they have even teeth, which comes in a nice little transparent container.
When going from client to client and you only have one clipper, how can I prevent them from over heating? Would you suggest owning two pairs and alternating between the two?
So I’m trying to decide here I’ve been cutting hair for a year now practicing on my borthers with Walmart clippers and am trying to upgrade any help which clipper I should get fast feeds or wahl magic clips ?
Hey, would you be able to link the ceramic blades for your Canadian subscribers please? Due to Covid19 some of these links are down and stocks are low. I'm really considering buying these, but I really want to get the ceramic blade you recommended, thanks!
@@UA-camBarberAcademy Thank you, really appreciate this! This is the one I'm looking at on amazon Canada "Andis CeramicEdge Ceramic Coarse Pet Replacement Blade Cutter, Size-Coarse (64440)" I'm not sure if this would fit the Oster fast feed?
Thank you for explaining 0 Gap so a non barber school, non pro can understand the terms and various pros and cons of the tools you use every day. As a carpenter, I could do the exact same with Saws, Chisels, Hammers, Drills etc. because I buy and use and keep certain ones for how they perform out of the box, to 40 years later. I love how you threw in mentioning that little sprayer in the end too.
I've had my Fast Feeds for about 8 years and they are still going strong. I'm excited to order the ceramic blades and try them out
It’s great to hear from someone who has years of experience with the clipper. Was looking for the best clipper to upgrade my home cuts from the shitty old remington I’ve used forever. The tips about ceramic blade and magnetic guides and links were extremely useful. Thanks!
UA-cam Barber Academy Yo Bro.. is it normal that my Fast Feeds are getting hot? I just bought them and used them for the first time today. They are not super burning hot but hot enough that my son says “it’s hot”. And that’s one of the reasons I bought them. All the good reviews and the fact they don’t get hot from what I’ve seen. But after trying them.. I don’t know if it’s normal or if I should send them back? I did change the blade to a ceramic blade by the way but I wanted to ask a barber because I’m not one. Any knowledge on this issue?
@@wearewarriorseaglesjaguars6342 Well if you áre cutting for an hour, yes it gets hot, but less with a cerámic blade. All clippers gets hot if you uses for a long period of time.
"shitty old remington I’ve used forever"
I'm in the same boat XD
Bro thanks so much for pushing this clipper. I finally bought one again and put on the ceramic blade and man it’s a game changer! My blends come out softer and it takes me less time fading
That's crazy, I was given my fast feeds from a barber I worked with cause he said the pulled. That ceramic blade makes all the difference. He seen me using them making buttery fades and he was like how did you fix them
So buttery with a ceramic blade damn they’re the goat 🐐
I have the ceramic blade on mine, and I started to really like cutting with them, but then they started pulling. Is it probably just that the ceramic blade is dull?
You always give the best detail information and descriptions. Keep up the great work. This help so much.. very informative. I went back to my Fast Feeds too. This time when really checking them, the fast feed give's a beautiful fade, there's no comparison.
I like the corded ones because their more reliable, and never run out of battery life
This was my go to clipper . I could run it for 13hrs haircut after haircut , with just some spray , and not heat up or give out on me. Most durable clipper I’ve had in the past compared to wahl or andis. I’ve dropped them plenty of times and they would hold up like champs ! Like any clipper though , they had some drawbacks. The lever would always give out , so much so that even at the salon supply they wouldn’t have anymore levers to sell. We have to wait 2 to 3 months for the next shipment. I even had to improvise and took the lever out and stuck t outliner screw in there to hold the blade tight enough so it wouldn’t open while cutting. I use to open and close it manually with my palm lol. You gotta improvise sometimes. I noticed that it was just a little plastic piece that moves the blade up or down. Pretty poor design on that part if you ask me , after so much wear and tear that little plastic piece will just tear off. I’ve always wondered why not just make it with a metal or aluminum lever since it’s an occurring pattern on most fast feeds. Or at least harder plastic like in the wahl levers. Have you had the same problems with the lever ? If so what’s your solution to it other than just buying a new lever. I know they’re inexpensive but when it tears on a Saturday like around 3pm and you don’t have time to just stop and go to a salon supply it can be pretty annoying .
CRAZY Truth! I don't a lot of time in the Marine Corps, I cut my hair simple-ALL OFF. when time is everything, hair prep in the morning was wasted time. I spent...WASTED money on more cheap Wahl clippers than I can remember. Fast Forward... Outta The Corps but STILL rock the Mr. Clean. My Dad was a barber over 20+ years both in and out of The Navy. He told me years back, INCREASE IN OSTER! he retired and have his Oster set to the incoming barber he trained. The Fast Feed was my 1st Oster clippers I bought November 2018. I was blown AWAY. I Did the Andis Ceramic mod, Zero-gapped, and haven't looked back. I just wish I knew about this setup years back!😏
One of the best reviews I’ve ever seen...regardless of product. Excellent.
Thanks for the video! Just ordered all 3 products. Coming from using 8 year old wahls clippers. Can’t wait to try these items out
I used a pair of these in barber school I didn’t like the feeling in the wrist but I’m thinking of buying another pair cuz they did knock out the bald line good
I’ve been watching watching a lot of reviews on clippers and these oster fast feeds really caught my eye ur review is definitely the best u explain so we’ll. I’m a beginner barber and am trying to save up enough money to get my hands on these. Thx for ur help
how you likin barbering now that its been 2 years?
I want to be a barber. And i learned so much about your video.
I've been using them for 11 years love them.
The same pair?
@@Mo-qs9oc Do you use the ceramic andis blade
Coming from whal cordless seniors and magic clip my fades are faster and crispy!!! Spent alot of money on clippers and finally i coped me some topaz with a ceramic blade and dam! These are all i need for fades now definitely a great clipper for the price.
@@UA-camBarberAcademyalways hesitated in buying them was stuck on Wahl these are just a beast love everything about them from the long lever throw to the quietness and 1st gen gaurd system .. thanks for all you're vids tips and knowledge !
@@MrJGSTA I went back to them also omg with a ceramic blade beautiful buttery blends don’t care to pick my seniors again and I lucked up on the 1st generation gaurds
@@tydeshawn125 For real been rockin with these and my new corded masters had to go with corded so much quieter then the cordless and honestly with those 2 thats all I need in the shop and the cuts come out fire 🔥
I agree there great. I use the topaz on my videos and they cut great.
Thanks for the helpful tips. I've learned so much from all your videos, I appreciate you. Happy Thanksgiving.....
My favorites. They almost seem to have like a texturizing effect. Thanks for the info on the ceramic blade.
Thank you very much for this information you provide us in barber and I hope to win this competition 👍👍👍
I know what you mean . I still have the firs set of nano guards. They are perfect. I have a new set now and the are flimsy, have less teeth and the magnet separates from the guards. I had to glue them down .
Greetings from Tijuana, Mexico. happy 2019 bro thanks for all that helpful tips and info I'm a beginner but, I'm now understanding more how to fade and cut, srating to feel good about that. man take care and God bless you
These are my money makers!
Love these kind of vid , I been cutting with Oster for years
6:55 dude, they both have 11 teeth. The 1 is just longer. It's an ~~~ooopticaal illuuuuusssion~~~
Also can use a detachable number 1 moving blade (oster) and use it, if you can’t find a ceramic blade.. nice video brotha.
My mans snap back dents into his forehead 😂😂
I can't un see this now lmao
For the record brother
You change only the cutting blade for this oster? Stock comb blade of the comb blade
Thanks a lot
Hi, can you tell me if your fast feeds warm up while using them? Thank you
Just a little on the body and blades nothing too crazy it gets warm not hot the blades on my oster 76 gets hot
Nice to see a real review on other barber products no friend shit
I don't know if someone answered this, but did the Fast Feeds come out around 1985-86 (so mid/late 80's)? I started out then and I thought they were new, up until then I had only seen Oster Classic 76's and the only adjustables were Wahl and Andis. Thanks for all your videos and reviews. This one is great, especially knowing how the ceramic blade improves performance.
hey man your growing on me your starting to be one of my regular youtube guy . like jeez and bosio the video that got me is the clipper over comb one. i see your a guy that get high debt into expelling thing and that exactly what i need man. keep em coming.let talk about the bottom line from the tripper to the zero close i have trouble removing that line, also how to remove dark spot in a fade. i faded this guy up using all the basis step but i still see dark spots from that zero close to the 1 close how do i remove them lines. thanks
Definitely want the cordless fast feeds
@@UA-camBarberAcademy they already made some cordless fast feeds. A guy at my barber school has a pair. U cant research on Amazon
@@3390974 damn man how much? I want some let me know if it’s good
@@UA-camBarberAcademy you have em yet ?
Hey mate, do you till recommend buying the Andis ceramic blade or the ceramic blade made by Oster themselves? cheers
Awesome review the fast feeds cut really well with the ceramic blade but I also noticed the blade will loosen up and slip out of place once in awhile and I’m not sure why that is? Does anyone have this problem or know why this happens?
Nice one bro... got everything but the ceramic blade... is that why the body of the clipper gets so hot after only two cuts? Plenty of oil on the blades too
Awesome video mate! I realised coz I do a lot of straight hair - I needed to put the ceramic blade on it. There’s a couple of ways to install the ceramic - which way / video do you recommend I follow? Cheers🙏
@@UA-camBarberAcademy Thanks so much! Ive put the 53 blade on it too! working really well!
Why does only the top blade need to be ceramic and not the backing plate?
Ll
They use a ceramic blade so they can zero gap the blades the ceramic blade allows you to line the teeth up to make the blade cut closer …me I like and left my original blade it comes with
Yes! Fast feeds with the ceramic blades are a beast!!! Thanks for sharing #barberluv fam
Cool video bro good info.. I have this same ser up on a topaz Ive heard its the same machine? Can you tell me the difference if there is one?
When I first got my pair they were fine and i put the andis coarse cutter ceramic blade and after 2 months the blades started getting loose when cutting long hair and i have to tighten the screws again but it doesnt fix the problem. and it makes a loud noise
Hi! What do I do if the teeth of the blade stick beyond the comb blade? Do you need to adjust any screw or do you just pull the lever?
Is the ceramic blades safe for beginners to use? Like would the blade cut the people im cutting or no accidents would happen
Mine makes a noise not as smooth as straight or off the box? They fell once ,the smooth buzz is gone.
I've been inside nothing's broken or cracked. Hope u you could assist me in getting my smooth hum back.
Thanks for the setup bro
Hey is this setup good?Thinking of starting to cut hair, i’m 16 and my friends r going to let me fade them for practice.
Andis Profoil Shavers
Andis T Outliners
Oster Fast feeds or a cordless Wahl Magic clips. Can’t decide between the two.
Also where would be the best place to purchase my supplies?
nathandejesus unless you can drop $300-$400, just get Oster Fast Feeds, Andis Ceramic Coarse cutting blade, and Andis double magnetic guards. Get used to cutting and grow a strong foundation. Then you can start investing in more equipment. You can use any ol shaver from Walmart/Walgreens like Panasonic or Braun, which are inexpensive. And don’t forget to buy disinfectant and Santizers like Barbicide/Clippercide.
for beginner I would take the magic clips. Fast feeds are exactly that they are for quick cutting. I would recommend that you do basic haircuts like 4 all around or 3 all around to understand the motion of holding the clippers, and understanding the lever.
I got those and for both I got ceramic blades and gold blades
I zero gapped my fast feeds with the course cutter and it works good only problem is when I open the lever all the way it makes a loud noise any tips to fix that ??
I fix ir removing some material (I sand it) from the back of the blade, the opposite side of the blade, and push back this metal thing that holds the plaatic sky, unscew it push ir down, scew it back.
I really want to like the fastfeeds, but after using them for 10 years. I realize for the hair type I cut, magnetic motors cut better and cleaner.
Hey man been really watching your channel definitely a lot of great info that most barbers won’t or don’t talk about but I started out using wahl guards but everyone mentions the andis guards with fast feeds....what is the difference between andis guards vs wahl is it worth changing over? Thanks
Good video bro thanks alot, may i ask why do it seem lime they louder then tere suppose to be?
I'd love to have those fast feeds
Mr Eddie. I ordered my fast feeds today from Atlanta Barber Supply online along with the Andis coarse cutter ceramic blade and the Andis purple double magnetic plastic guards. Can't Wait !!
I had heard that when you install the ceramic blade you have to get some sandpaper or file and Sandy plastic edges of the fast feeds a little bit so the ceramic blade can move freely
mine broke the first time i dropped them. The plastic by the lever broke. Just ordered a set of magic clips but havent opened them yet cuz after watching this i might return them and replace my feeds instead. Got any advice?
Whats the difference between the firlex and the coarse cutter .
Thank you for the information. I’ve had my fast feed for over ten year’s but the screws unscrew when I use it do you have any suggestions for me. Thank you in advance
I just put the oster fastfeed blade on my wahl cordless clipper
hmm some mod /
Holy shit 4 years and andis still has rookie guards
Great great brother thank you so much👍🏾👌🏾💪🏾
So first off thank you for the pro tip been struggling to zero gap my fast feeds so thank you 🙏🏻🙏🏻 only problem now is my 0 guard pops off every time I turn it on. I use the double magnetic andis guards.. I’ve tried adjusting the blades a thousand times can’t figure it out.. any tips? Or other guards I can buy??? Preciate it
You have to move back that piece of metal that holds the kind of plastic sky, unscrew ir hold it down while you screw it again. That push the blade a bit down.
#Bills make me wanna shout!
I might have to cop a pair with the enthusiasm u have with the fast feeds
💈👍
Are these just for fading? I got a pair, put the ceramic blade in and started with a #2 guard. The client had pretty thick dense hair and it just wouldn't cut through it. It pulled so much I stopped right away and had to switch clippers... Am I missing something?
Are these clippers good for cutting through super thick hair for an all around haircut or are they only decent for just fading or what not?
I'm a new barber and was wondering if Oster fast feeds are good for fading and good for a new barber
@@UA-camBarberAcademy thx what are some good fading clippers for a new barber
Fast feeds with a ceramic blade omg cut like butter that’s all I want to fade with with the purple gaurds blends come out buttery as fuck
Man what do we need do for a chance to win the clippers . I just dropped my master while I was cutting a man's hair at school and they broke smh couldnt even finish the haircut my teacher had to come Finnish it lol one of the most embarrassing days of my life. So I best believe imma do whatever to enter to win
Say Dawg, Can You Help me with something,.. I Have to original Oster Fast Feed and I Noticed the clipper blades are (Like you mentioned,) Sticking/Freezing in my hair and Not Cutting Through (Like They did when I First Bought Them) My Hair Length is Like a 1.5, Is There a Solution To This Problem? What's The Best Blade combo For ZERO gap and Anti-Rust? Please let me know Stay Safe & Healthy Brotha!!
Why do you think my ceramic cutting blade slows down tremendously when I open the blade?
Do you have try the fine blade 913-53? If yes how it is feeling?
omnicord sell ceramic blades, they’re very good and this isn’t a sponsor ship but i just want to tell yall a cheaper version 🔥
@youtubebarberacademy have you ever used the fine tooth blade on the fast feeds? Is there a difference in the way it blends?
Oster should just start making them with the ceramic blade on them and get rid of those cheap slide on guards that come with them. Im sure their sales would go up
Yea if they came out with the cordless version too got damnit oster bullshittin
Congrats on your subscribers
Mann I feel u on this! I bought a pair of limited edition fast feeds and I did not like them because I tried to zero them and it didn’t happened so I sold them now I want to try them again but the original , I don’t know if there is any difference bt the two but I will invest once more in the fast feeds!👊🏾
Yes!!!! Cleanest haircutting contest!!!!
If u can't find the year one purple guards what's the next best ?
If you don’t change the blade is it very that bad ?
Hey what’s up Eddie , somebody else mentioned in the comments about after putting the ceramic blade on the Fast feeds getting hot fast and it making a noise when you fully open it it sounds like the bottom of the cutting blade touching the lever mechanism, is there any thing i can do to fix it ?
how can i tell if my oster fast feed is the crappy old version? it has the silver emblem vs the newer black emblem but i can’t tell how old it is, i bought it used , thanks
Does the old pair work just as well as the new pair after adding the ceramic blade?
I'm back again Eddie, the knowledge you're dropping in your videos is priceless! I have a fast feed with andis ceramic blade but it's longer in the middle. Have you ever had this? I'm thinking of trying another from your link to hopefully get a straight one! Do you think a longer middle will make a difference in the cut? Let me know what you think cheers
The Andis ceramic have that defect of being uneven. I used to have one like yours. I recommend buying a
non-Andis brand from eBay or Amazon as they have even teeth, which comes in a nice little transparent container.
You should give those clippers to kids in Africa, who are having the haircutt issue thats keeping them from attending school.
Good idea. Naps scare other kids.
fs copping a pair now
I'm lowkey still having a hard time picking between these and the wahl magic clips😭🤦🏾♂️
Same 😔
these and magic clip cordless should be your set
Great video,bro
@UA-cam Barber Academy can you plz do a tutorial with these on how to taper fade plz with all the steps in it
awesome review , thank you
Do you have any andis masters laying around
Where can I get the ceramic blade?
Do you notice a difference in the zero guars?
Can you cut bulk with these
I think you should just give them to me for Xmas. LOL! I suck at fading right now, so I would definitely lose that competition.
When going from client to client and you only have one clipper, how can I prevent them from over heating? Would you suggest owning two pairs and alternating between the two?
keko fast feeds never get hot so... get those ones
Great content
what's up my man!!! u the best!!
Is this fast feed only for fades?
Where is the link for the ceramic blade?
did you take the link down?
So I’m trying to decide here I’ve been cutting hair for a year now practicing on my borthers with Walmart clippers and am trying to upgrade any help which clipper I should get fast feeds or wahl magic clips ?
Anthony miranda in my opinion wahl magic clips, I started with those and now imma get the fast feeds
Gucci Mane thanks man
Gucci Mane what trimmers u use ?
Hey mate you ever use the osters 606 its suppose be equivalent to fast feeds only from europe
Lol mark I always find you on any video/picture to do with fast feeds or 606! Just but a pair a test them out for yourself 😂❤️
They look cheap and ugly, honestly.
Does anyone know where I can get the original guards? Not the new ones
I just put my ceramic blade on my fast feed and when it’s fully open it makes a weird noise and it also gets somewhat hot quick..any idea why? 🤔
Might be tension
Ir happened to me, you have to remove some material from.the blade because ir tuched the levers guide. Got it?
Hey, would you be able to link the ceramic blades for your Canadian subscribers please? Due to Covid19 some of these links are down and stocks are low. I'm really considering buying these, but I really want to get the ceramic blade you recommended, thanks!
@@UA-camBarberAcademy Thank you, really appreciate this! This is the one I'm looking at on amazon Canada "Andis CeramicEdge Ceramic Coarse Pet Replacement Blade Cutter, Size-Coarse (64440)" I'm not sure if this would fit the Oster fast feed?