MCQ'S on GAS WELDING( Oxyacetylene Gas ), Types of flames and ARC WELDING ... Prof. Sudhir Thakre

#MULTIPLECHOICEQUESTION
on
#GASWELDING
#OxyacetyleneGas
#Types
of
#flames
and
#ARCWELDING
Oxyacetylene welding, commonly referred to as gas welding, is a process which relies on combustion of oxygen and acetylene. When mixed together in correct proportions within a hand-held torch or blowpipe, a relatively hot flame is produced with a temperature of about 3,200 deg.C. The chemical action of the oxyacetylene flame can be adjusted by changing the ratio of the volume of oxygen to acetylene.
There are three types of flame natural flame, carburizing flame, and oxidizing flame
Welding is generally carried out using the neutral flame setting which has equal quantities of oxygen and acetylene. The oxidising flame is obtained by increasing just the oxygen flow rate while the carburising flame is achieved by increasing acetylene flow in relation to oxygen flow. Because steel melts at a temperature above 1,500 deg.C, the mixture of oxygen and acetylene is used as it is the only gas combination with enough heat to weld steel. However, other gases such as propane, hydrogen and coal gas can be used for joining lower melting point non-ferrous metals, and for brazing and silver soldering.
Arc welding is a type of welding process using an electric arc to create heat to melt and join metals. A power supply creates an electric arc between a consumable or non-consumable electrode and the base material using either direct (DC) or alternating (AC) currents.
The arc can be either manually or mechanically guided along the line of the join, while the electrode either simply carries the current or conducts the current and melts into the weld pool at the same time to supply filler metal to the join.

[@yashpawar269]

🙏🙏🙏 excellent ❤️

[@bishnupadamohanta3998]

Nice class sir

[@sudhirthakre3061]

Keep watching