Just a question after you fitted the clutch what was the procedure with getting it working. i.e programming the biting point, programing the gear change, pressurising the actuator?
My dad's Citroen C4 has the same ETG6-gearbox. After clutch and flywheel replacement gearshift became even slower than before the repair. I counted it takes now 2-3 seconds (!) to upshift. In reverse gear the clutch slips so badly that it begins to smell. The car haven't done that either before the repair. Is there something wrong with the software? The work was done by a professional PSA specialized workshop.
Mine will select reverse and car moves but if I select drive it doesn't move and stays in neutral then throws a code p1734 gear actuation position in the gear selection shaft signal fault . How can I fix this ? Can I remove actuators with the box on the car ? Thanks in advance a fellow mechanic
Sorry to bring this one back from the dead.. just wondering if you had any recommendations for a budget diagnostic equipment to reprogramme a 508 semi automatic.. doing it on the drive and to say its a nightmare, is an understatement! 😢
Helow mate i have a bad juddering on first gear i have the same semi auto 208 2016 model what will be the problem and how much it will cost and how long i will take to fix and if i wana take an apointment to fix it thax matr
You dont have to lower the subframe ?? i watch other video and they lower the subframe and i do the same and now stuck with bolt spin around. Will be easier for me tighten bolt and dont touch subframe
What this little square doing on pressure plate? I order Valeo kit and pressure plate looks different the car dont drive and wont let me to learn gearbox is it mean i fit a wrong parts?
My peugeot 3008 seni auto driving in auto changes to m3 then back to a3 any idea happend in 4th as well its like a curly m not like when its in full manual mode? Does this mean its slipping ?
Hi, we’ve got a 2010 Peugeot 3008 semi automatic which has a gearbox fault light that comes on and off, I need it sorting, would you be interested in booking it in? Cheers
Hiya mate, Don't suppose you know if it's the same layout on a 508? 2011 1.6hdi semi-auto. HaynesPro saying its an ~8hr job & i'm trying to figure out why..
I watch ur videos on tik tok lol i have peugeot 3008 semi it jerks bad in low gears slow when changing and judders and swops from a to m to auto in 3d some times is this clutch as had it done an flywheel seems getting worse and worse no one will do was gona drive 3 hours to u lol
Just a question after you fitted the clutch what was the procedure with getting it working. i.e programming the biting point, programing the gear change, pressurising the actuator?
Mine drives like shit after new clutch and flywheel lol and some times swops to manual then bk to auto going dwn gears iv noticed any idea lol
Hi which garage is this, how much does a clutch replacement cost on a Peugeot 208 mk1 semi auto?
My dad's Citroen C4 has the same ETG6-gearbox. After clutch and flywheel replacement gearshift became even slower than before the repair. I counted it takes now 2-3 seconds (!) to upshift. In reverse gear the clutch slips so badly that it begins to smell. The car haven't done that either before the repair. Is there something wrong with the software? The work was done by a professional PSA specialized workshop.
Did you relearn the gearbox?
The clutch hydraulic fuild does that tank stay full after bleed as mine is lower its not full
Mine will select reverse and car moves but if I select drive it doesn't move and stays in neutral then throws a code p1734 gear actuation position in the gear selection shaft signal fault . How can I fix this ? Can I remove actuators with the box on the car ? Thanks in advance a fellow mechanic
Done a fair few of these got one to do tomorrow in a c4 grand picasso keep hearing customers saying not many garages will do them tho
Not many will get involved don't know why its a normal clutch job with pressing a few buttons
@bazmeredith exactly done harder Manual ones tbf top work tho mate
My 3008 judders on pull of sum times swops from auto to manuel in 3d and changes slow is it slipping ? And jerks in 1s and 2nd bad like ur rocking lol
Hello, did you change the floating steering wheel? And what brand is the clutch kit? I have to do this job in a C4 cactus, greetings
Sorry to bring this one back from the dead.. just wondering if you had any recommendations for a budget diagnostic equipment to reprogramme a 508 semi automatic.. doing it on the drive and to say its a nightmare, is an understatement! 😢
I'm not sure tbh in lower end cheaper diag tools as I've never used them and hate to say something you buy it and not work
The knock off Peugeot diagnostics from China does it properly.
How many miles did you do when replacing the clutch and test driving it making sure it all works
i have semi auto and from cold when starting f it sort of kangeroos moving from first after couple minets its fine wot could that be
Helow mate i have a bad juddering on first gear i have the same semi auto 208 2016 model what will be the problem and how much it will cost and how long i will take to fix and if i wana take an apointment to fix it thax matr
You dont have to lower the subframe ?? i watch other video and they lower the subframe and i do the same and now stuck with bolt spin around. Will be easier for me tighten bolt and dont touch subframe
Hi nice vid, I’m doing mine this weekend and was just wondering do you have to de-pressurise the hydrological first? Cheers
What this little square doing on pressure plate? I order Valeo kit and pressure plate looks different the car dont drive and wont let me to learn gearbox is it mean i fit a wrong parts?
My peugeot 3008 seni auto driving in auto changes to m3 then back to a3 any idea happend in 4th as well its like a curly m not like when its in full manual mode? Does this mean its slipping ?
Hi, we’ve got a 2010 Peugeot 3008 semi automatic which has a gearbox fault light that comes on and off, I need it sorting, would you be interested in booking it in? Cheers
Hi my 3008 semi auto says a3 then m3 some time when driving any idea judders a little aswell on pull off?
Hiya mate,
Don't suppose you know if it's the same layout on a 508?
2011 1.6hdi semi-auto.
HaynesPro saying its an ~8hr job & i'm trying to figure out why..
Think you
Hi baz i need some info if possible
Can i ask someone questions please
Mine takes for ever to change gear an judders
Don't think you really have to do the learning and driving bit.
If you want your gearbox to work properly and not ruin your new clutch, you do have to do relearn procedure.
I watch ur videos on tik tok lol i have peugeot 3008 semi it jerks bad in low gears slow when changing and judders and swops from a to m to auto in 3d some times is this clutch as had it done an flywheel seems getting worse and worse no one will do was gona drive 3 hours to u lol