EMAX Transporter 4.3" FPV Goggles, 480x320, 48Ch, 5.8GHz, Auto Scan, 18650 battery

Поділитися
Вставка
  • Опубліковано 30 жов 2024

КОМЕНТАРІ • 136

  • @81hermit
    @81hermit  4 роки тому +3

    Hi to everyone! If you need EMAX Transporter 4.3" FPV Goggles - look here: bit.ly/38LDP8L. Other EMAX products you can find here: bit.ly/2TRC71a 8% Off - Toysho (rchobbies8 - 8% Off). If you have some questions - please ask, I will try answer to you. Links to additional electronics which I use in this video you can see in description under this video. Please LIKE (thumbs up) if you like this video, also please subscribe to my UA-cam channel. Thanks for watching.

    • @DominicIsaac
      @DominicIsaac 4 роки тому

      Hello, thank you for this amazing informative review. I just wanted to ask if I can use this with this product emax-usa.com/collections/hot-products/products/emax-tinyhawk-2-race-fpv-drone-bnf because I am a complete beginner with all the technical stuff. Thank you for your response.

    • @81hermit
      @81hermit  4 роки тому

      @@DominicIsaac yes, you can use these goggles with Tinyhawk II Race

    • @LetsGetGaming.
      @LetsGetGaming. Рік тому

      I'm trying to find the battery pack for these goggles the battery pack for it has broke. Do you know where i can get JUST the battery pack?

    • @ivanbrest7650
      @ivanbrest7650 Рік тому

      @@LetsGetGaming. Probably in your battery pack battery is dead. Pull out the battery and measure voltage. I think, you need to replace in on new one 18650 battery.

    • @LetsGetGaming.
      @LetsGetGaming. Рік тому

      @@ivanbrest7650 Thanks for the advice but the entire outer shell is like exploded and the cable has been cut.

  • @dangerousman5553
    @dangerousman5553 4 роки тому +1

    Good tests with different remote control products

  • @WreckinStreetsDaily
    @WreckinStreetsDaily 4 роки тому +3

    3:39 wow! I waited a whole day for the battery to charge! I thought red meant charging and green meant full charge. Why would they switch the colors!? Thank you so much for making this video! For some reason this info is hard to find 🤦

    • @81hermit
      @81hermit  4 роки тому

      I very glad that my video was helpful for you

  • @cdubb444
    @cdubb444 3 роки тому +1

    Best video for these goggles! Thank you

    • @81hermit
      @81hermit  3 роки тому

      thx for your feedback. you are welcome ;)

  • @SSD26101
    @SSD26101 9 місяців тому +1

    Hi, thx for review. I get same goggles without battery pack could you please check what is the output voltage of the battery pack?

    • @81hermit
      @81hermit  9 місяців тому +1

      3.3 - 4.2V.
      You can use Li-Po or Li-Ion battery like in this video.
      Look from 01:07

    • @SSD26101
      @SSD26101 9 місяців тому

      @@81hermit Hi, thx for your reply. Is this battery pack has no step UP circuit right? For example input voltage 4.2-3.7 but output 5v or someting else

    • @81hermit
      @81hermit  9 місяців тому

      @@SSD26101 Manufacturer says "for powering EMAX Transporter 4.3" FPV Goggles needs voltage: 3.3-6.0V."
      But I think for powering needs 3.3 - 4.2V.
      If you look from 01:07 - you can see plastic shell for battery. Through that plastic shell you can charge 18650 Li-Ion battery using USB 5V.
      If you have not plastic shell - you can charge your battery using some other charger which support Li-po and Li-Ion batteries.

    • @SSD26101
      @SSD26101 9 місяців тому

      @@81hermit thanks a lot, I could work it between 6-7.2 voltage. Under 5 volt it was buzzling.

    • @81hermit
      @81hermit  9 місяців тому

      @@SSD26101 I think if you will use 6-7.2V - your Goggles will die.

  • @GhostRider-xm7of
    @GhostRider-xm7of 3 роки тому +1

    Very detailed review. Thanks for you work

    • @81hermit
      @81hermit  3 роки тому

      thx for feedback. you are welcome

  • @elslepwing3264
    @elslepwing3264 4 роки тому

    FPV goggles without DVR is a last century! :)

    • @81hermit
      @81hermit  4 роки тому +1

      Yes. I just show these goggles with all necessary info. Perhaps some users will have these goggles and they will be need information about them.

    • @sunshynff
      @sunshynff 4 роки тому +1

      Some might say that about box goggles period, some people use a ground station with it's own DVR, most goggles, even high end fat sharks, have crappy built in DVR so many people use external dvr, many on board fpv cams have built-in DVRs. So lots of reasons to get a goggle without DVR, besides the obvious fact that these are pretty good and only cost $50.

    • @81hermit
      @81hermit  4 роки тому +1

      @@sunshynff FPV ground stations, goggles, monitors with DVR - right choose. FPV cameras with build-in dvr - is no so actualy. When you loose somewhere your (for example: drone) - you will serch it using records from dvr in your goggles, monitors and etc.

  • @alchek2795
    @alchek2795 3 роки тому

    These are good and cheap goggles for beginners who want to try fpv

    • @81hermit
      @81hermit  3 роки тому

      thx for your feedback. yes, i agree with you

  • @maxsavory2808
    @maxsavory2808 5 місяців тому

    hi, would the eachene tx02 ntsc be compatible with this??

  • @Broski__
    @Broski__ 3 роки тому +1

    Just bought the TH2F RTF kit. Looking to upgrade the antennas on the goggles and the drone. What do you recommend?

    • @81hermit
      @81hermit  3 роки тому

      Stock fpv antennas must be more than enough for your tinyhawk

  • @LouisPortugal
    @LouisPortugal 9 місяців тому

    My LCD cracked and the replacement I ordered is upside down as are all the ones I've found. Any idea where I can find a replacement LCD ( or the part number) that has the ribbon cable conected at the top instead of the bottom ?

    • @81hermit
      @81hermit  9 місяців тому

      Sorry, I can`t help you. All LCDs what I find - all have cable ribbon on the bottom.

  • @ambitionz5625
    @ambitionz5625 4 роки тому

    In order to actually change channel or get to the menu you have to hold the button down for about 5 seconds and the blue highlights to red and then you press the button to change channel while the text is red

    • @81hermit
      @81hermit  4 роки тому

      Hmmm. Probably you use some other version of that fpv goggles

  • @lavaman4089
    @lavaman4089 4 роки тому

    thank you for this video. I just try now search fpv goggles for myself

    • @81hermit
      @81hermit  4 роки тому

      look here goo.gl/FKfxsi, probably you can find something for yourself

  • @lavaman4089
    @lavaman4089 4 роки тому

    good and cheap goggles for everyone who want to try FPV

    • @81hermit
      @81hermit  4 роки тому

      yes, but better search fpv goggles with true diversity

  • @lockeparsons9198
    @lockeparsons9198 2 роки тому +1

    Will these work with the emax hawk pro

    • @81hermit
      @81hermit  2 роки тому +1

      Yes, will work. Emax Hawk Pro and EMAX Transporter FPV Goggles are using almost the same frequencies.

  • @maxportillo4262
    @maxportillo4262 Рік тому

    How is the eachine ev800 better? If i need glasses do you recommend the ev800?

    • @maxportillo4262
      @maxportillo4262 Рік тому

      Also would the screen look better and clearer compared to the emax?

    • @81hermit
      @81hermit  9 місяців тому

      I tested Eachine EV800DM. Eachine EV800DM will be better than EMAX Transporter

    • @81hermit
      @81hermit  9 місяців тому

      @@maxportillo4262EMAX Transporter have resolution 480x320, Eachine EV800DM - 900x600

  • @ivanbrest7650
    @ivanbrest7650 4 роки тому

    very simple and budget goggles

    • @81hermit
      @81hermit  4 роки тому

      yes, you are right!

  • @BodyTransformerss
    @BodyTransformerss 11 місяців тому

    Man great video wow so I can use Emax google to bind with my beta65s ?

    • @81hermit
      @81hermit  11 місяців тому +2

      Yes, beta65s uses M01 AIO Camera 5.8G VTX V2.1 - 6 bands 37 channels, with Raceband: 5362~5945MHz. You can use it with EMAX Transporter 4.3" FPV Goggles

  • @leswhite3846
    @leswhite3846 3 роки тому

    I bought 2 drones and 2 cars for my kids. Is it possible to set them on different channels so they can race side by side with the cars?

    • @81hermit
      @81hermit  3 роки тому

      Yes, you can set them on different channels. These goggles use next frequencies:
      A 5865 5845 5825 5805 5785 5765 5745 5725
      B 5733 5752 5771 5790 5809 5828 5847 5866
      E 5705 5685 5665 5645 5885 5905 5925 5945
      H 5362 5399 5436 5473 5510 5547 5584 5621
      F 5740 5760 5780 5800 5820 5840 5860 5880
      R 5658 5695 5732 5769 5806 5843 5880 5917

  • @GOOD-ss1dq
    @GOOD-ss1dq 3 роки тому

    DOES THE RANGE OF DISTANCE FOR THE LIVE VIEW DEPENDS UPON THE CAMERA QUALITY , VIDEO TRANSMITTER QUALITY OR THE EACHINE QUALITY. REPLY BCOZ I HAVE WRITTEN HERE WITH HOPE.

    • @81hermit
      @81hermit  3 роки тому

      distance depends from vtx power

  • @jozafax
    @jozafax 3 роки тому

    Great detailed video!

  • @mr.j9232
    @mr.j9232 4 роки тому

    This is what im looking for,thnks you sooo much..

    • @81hermit
      @81hermit  4 роки тому

      you are welcome

    • @mr.j9232
      @mr.j9232 4 роки тому

      Which one u this i must buy sir,betafpv v01,emax or ev800

    • @81hermit
      @81hermit  4 роки тому +1

      @@mr.j9232 betafpv vr01 and ev800 be better than emax, but you can add a little bit money and take ev800d. ev800d - with diversity and dvr

    • @mr.j9232
      @mr.j9232 4 роки тому

      @@81hermit perfect,i buy ve011

  • @boydriver2978
    @boydriver2978 4 роки тому

    I recently got the EMAX Goggles have great reception, using emax pilot. BUT when the drone motors start the goggles looses the channel, every time. Any ideas on what the problem is please?

    • @81hermit
      @81hermit  4 роки тому

      Goggles loses the channel or drone change the channel after drone motors start?

    • @derekjohnn2329
      @derekjohnn2329 3 роки тому

      After you start your motors scan while armed and spiining

  • @zaeemmohammed5521
    @zaeemmohammed5521 4 роки тому

    Are these goggles any good ? not seeing much reviews for them online. For a noob in FPV, Im getting the tinyhawk 2 kit, but thinking to get the fatshark recon v3 instead of the full tinyhawk 2 kit.

    • @81hermit
      @81hermit  4 роки тому

      These goggles very budget. They be good for beginners who have not many money. If you have additional money - look to some goggles with diversity and with built-in dvr. I testet Fatshark Recon V3 ua-cam.com/video/bgqhA4cztLs/v-deo.html Fatshark Recon V3 be better than EMAX Transporter!

    • @zaeemmohammed5521
      @zaeemmohammed5521 4 роки тому

      @@81hermit ,yea i saw these as well, but everyone seems to be out of stock atm.

  • @c_g14
    @c_g14 3 роки тому

    HI how you going 😁 I am just wondering is there any way the show the vr screen in laptop screen ?

    • @81hermit
      @81hermit  3 роки тому

      you can use something like Eachine ROTG02 receiver, it can be connected to pc or phone...

  • @chubsmania
    @chubsmania 8 місяців тому

    Yo so my friend just gave me his because he never really used it, he said he only used it once, but i don't have the battery that goes into the goggles, could you send me an amazon link or something to that battery because I can't find it. Would greatly appreciate it. Thanks

    • @81hermit
      @81hermit  8 місяців тому

      You can use any Li-Po or Li-Ion 3.7v battery. You will be need to pick up power jack like in battery plastic shell 00:58 and make some adapter from battery to goggles

    • @chubsmania
      @chubsmania 8 місяців тому

      @@81hermit Got it thanks 👍

    • @81hermit
      @81hermit  8 місяців тому

      @@chubsmania you are welcome

  • @derekjohnn2329
    @derekjohnn2329 3 роки тому

    How do I make the extra specs and stuff on screen while flying

    • @81hermit
      @81hermit  3 роки тому

      You need OSD pcb module or vtx with OSD

  • @shaunybox12
    @shaunybox12 3 роки тому

    Would I be able to use other antennas as long as they have the same connector? :)

    • @81hermit
      @81hermit  3 роки тому

      Yes, you can use other antennas if they have the same connector

  • @federicoetcheverry7963
    @federicoetcheverry7963 3 роки тому

    nice video

  • @didusmiletoday
    @didusmiletoday 4 роки тому

    Is it possible to install DVR on Emax Transporter Goggles?

    • @81hermit
      @81hermit  4 роки тому

      I think will be easier to buy fpv goggles with built-in DVR instead installing the DVR module to Emax Transporter.

    • @didusmiletoday
      @didusmiletoday 4 роки тому

      @@81hermit thanks man. But is it possible?

  • @гражданинпланеты-с6д

    Is it better vs eachine ev800dm???

    • @81hermit
      @81hermit  4 роки тому +1

      No. EV800DM will be better than EMAX Transporter. EV800DM video review is coming soon.

  • @sheapyfpv8224
    @sheapyfpv8224 3 роки тому

    Can you change power output from 25mW?

    • @81hermit
      @81hermit  3 роки тому

      EMAX Transporter FPV Goggles can only receive video signal. Some AV transmitters can change power 25mW and higher

    • @sheapyfpv8224
      @sheapyfpv8224 3 роки тому

      @@81hermit Aah ok thankyou for your help

    • @81hermit
      @81hermit  3 роки тому

      @@sheapyfpv8224 you are welcome

  • @mrUrlolFPV
    @mrUrlolFPV 2 роки тому

    what do you call that battery pack?

    • @81hermit
      @81hermit  2 роки тому +2

      battery pack - this is 18650 Li-Ion battery, 3.7V, 1800mAh (in plastic shell)

  • @muhammadadil645
    @muhammadadil645 4 роки тому

    Does the come with the emax tinyhawk series quads

    • @Noxoreos
      @Noxoreos 4 роки тому

      Only when you get the RTF bundles. The Tinyhawks also sell without transmitter and FPV googles.

    • @muhammadadil645
      @muhammadadil645 4 роки тому

      Kk

    • @81hermit
      @81hermit  4 роки тому

      you can see here bit.ly/2TRC71a

  • @tovardgarold4510
    @tovardgarold4510 4 роки тому

    very good bro. +1 for your work

  • @marekpachno1422
    @marekpachno1422 4 роки тому

    Hi, is it possible to use these goggles with dij spark?

    • @elslepwing3264
      @elslepwing3264 4 роки тому

      No! These goggles is no compatible with DJI Spark, also Spark will not work with DJI goggles

    • @marekpachno1422
      @marekpachno1422 4 роки тому

      @@elslepwing3264 Thanks a lot!

    • @81hermit
      @81hermit  4 роки тому

      @@marekpachno1422 ElSlep Wing is right!

  • @mateocntr2998
    @mateocntr2998 3 роки тому

    i'm stuck with a white screen on it and cant see any menu can someone help PLEASE

    • @benjaminpatte3859
      @benjaminpatte3859 2 роки тому

      Hello, same problem as you. The drone is flying ok. But i am stuck with white screen. Batterie is charged and drone binded. Have you solved the problem?

  • @islandclub69420
    @islandclub69420 4 роки тому

    .Q .can this connect with a dji mavic mini ?...thanks

    • @81hermit
      @81hermit  4 роки тому +2

      I don't think so!

  • @ca5ualm3dia
    @ca5ualm3dia 3 роки тому

    you in the freemason lodge or something is that where they plot their evil plans HHAHAHAAH

    • @81hermit
      @81hermit  3 роки тому

      hm. strange comment

  • @insertbasicusername3617
    @insertbasicusername3617 3 роки тому

    How far without loosing image?

    • @81hermit
      @81hermit  3 роки тому

      Distance depends from power of video transmitter!

    • @callum2687
      @callum2687 3 роки тому

      @@81hermit if its a cheap one then how much?

    • @81hermit
      @81hermit  3 роки тому

      @@callum2687 Now these goggles have a cost approx 65 usd. But you can choose something else. Look here goo.gl/FKfxsi

  • @jtsn667
    @jtsn667 3 роки тому

    Whats the range?

    • @81hermit
      @81hermit  3 роки тому +1

      range depends from power of video transmitter

  • @glens1800
    @glens1800 3 роки тому

    Hi there I’m having an issue where my camera is sending the image upside down to my goggles and I have no idea how to fix this. I’ve been searching UA-cam for days with no videos showing this error. Do you have any idea what is happening? Thanks

    • @81hermit
      @81hermit  2 роки тому

      Which camera and AV transmitter you are use?

    • @glens1800
      @glens1800 2 роки тому

      @@81hermit I solved that problem but now I have another lol I lost control of my drone and lost it 😓 if I buy another tiny hawk 2 drone on its own will the same goggles and controller I already own be able to work with it. Thanks

    • @81hermit
      @81hermit  2 роки тому

      @@glens1800 EMAX Transporter goggles will work with you new Tiny Hawk 2 drone. But about old controller I can`t say something. Probably you can use it, but you need to know how to bind/pair it with a new Tiny Hawk 2 drone.

  • @kidalainababy5337
    @kidalainababy5337 3 роки тому

    What is the range with this antennas?

    • @81hermit
      @81hermit  3 роки тому

      range depends from vtx power

    • @kidalainababy5337
      @kidalainababy5337 3 роки тому

      @@81hermit If i use eachine tx 05 with 250 mw with that goggle,then what will be the range?

    • @81hermit
      @81hermit  3 роки тому

      @@kidalainababy5337 Eachine tx05 with 250mw can give you max range approx. 300m may be a little bit more

    • @kidalainababy5337
      @kidalainababy5337 3 роки тому

      You have done a review of the emax intercepter.Would you please tell me that the emax intercepter goggle and this goggle is same?

    • @81hermit
      @81hermit  3 роки тому

      @@kidalainababy5337 must be a same

  • @mr9712
    @mr9712 4 роки тому

    Is it possible to do dvr mod on this

    • @ivanbrest7650
      @ivanbrest7650 4 роки тому

      I think will be easier to buy goggles with already built in dvr

    • @81hermit
      @81hermit  4 роки тому

      I think Ivan Brest gave to you a right answer!

  • @CONFUCIUS-f2x
    @CONFUCIUS-f2x 3 роки тому +1

    TALK !!

    • @81hermit
      @81hermit  3 роки тому +1

      sorry. only subtitles

  • @scu-dub
    @scu-dub 3 роки тому

    Do these have diversity?

  • @kyrylokozhumyaka1136
    @kyrylokozhumyaka1136 4 роки тому

    with two antennas. must be diversity

    • @81hermit
      @81hermit  4 роки тому

      You can see in this video in 02:04 - EMAX Transporter has just one receiver. If some people or stores say about diversity - it is fake information

    • @sunshynff
      @sunshynff 4 роки тому

      @@81hermit It usually says true diversity somewhere on box, "dual antennas for better reception" is usually the red flag. Although, did you happen to look at the back side of the board the diversity unit was attached to on the right? (as you're looking at it). I have a older Eachine goggle, that looks oddly just like and older version of the Emax, I'm sure they all come from same factory..lol Anyway, it has two antennas, and I always assumed it was fake diversity and had only one receiver. Cleaning them up the other day to pass on to a nephew wanting to learn. Took them apart to fix a couple loose wires, low and behold, true diversity. The board in it looked almost exactly like the one in above video. The second rx is on the opposite side of the board than the first one. I didn't notice it on mine until I was putting it back together, that's why I was asking, thanks for the review!

    • @81hermit
      @81hermit  4 роки тому +1

      @@sunshynff 02:02 main pcb, back and front view. We can see only one receiver. Thx for your feedback Bro ;)

    • @nakamotolikesyou
      @nakamotolikesyou 4 роки тому

      @@81hermit It does say on the emax website itself that it is in fact for diversity.

    • @81hermit
      @81hermit  4 роки тому

      @@nakamotolikesyou You can find on youtube videos form other users, in these videos also shown just one receiver.