Notice they have it raised much higher than the stand that comes with the printer. I tried this and you will get head strikes. They have some type of clips holding down the film in this video. That is not included or mentioned. With those hold down clips, you are making your printable are much smaller. Not the 24" anymore
yes this printer also can work with P8080 with ARC chip and Refillable cartridge. but for this type of printer did not recommed to DTF it's hard to maintenance . if you have any more question just Message me ,thanks
@@brotherernest5993 please we just keep update the oven more better for work .if you are interest we can custom make one for normal p6000 model printer whatsapp me +8615015164529
This WILL NOT WORK with the Epson SC-P6000. The printer is too slow and the heater for per heating is too hot, even all the way down. The powder shaking is uneven. You will end up having to remake all your customer prints because there will be no powder and cured ink without powder. I tried for weeks to get this to work. Dont waste your money!
thanks for you Message. as you know normal P6000 is was for photo working only it' s have a normal stander. in fact we already work alots with modify P6080 P6000 with this dryer. you should set up a stander for printer. and here all the heatter have a control button ,can adjust the tempreatrue. please if you need any help can contact your seller or write to me.
this not hard we already help some guys to change the board to P6080 and work with ARC chip .then it's connect with DTF.good quality only a little slowing print .why did you think it's only work within china?
@@skyzhang where do you get the boards from? EU boards record the serial numbers of the cartridges so arc chips do not work. where are the arc chips for sale?
@@skyzhang I convert 24 inch epson printers for dtf here in europe. if you can supply me with chinese boards I can start converting the p series printers also. Sell the dryer/shaker with it. Right now I only focus on the 7890/7900
Notice they have it raised much higher than the stand that comes with the printer. I tried this and you will get head strikes. They have some type of clips holding down the film in this video. That is not included or mentioned. With those hold down clips, you are making your printable are much smaller. Not the 24" anymore
Awesome! Very Big for big production
Awsome video , thank you for your Demo
What is the color order of this please picture of color cartridges
I’m interested in carrying this dryer. I can buy several
Will it be able to go inside of a 36" door
IT's can work if you want any more detail just write to me the new version already on sale now
hi do you provide the converted p8000 printer as well for dtf
yes this printer also can work with P8080 with ARC chip and Refillable cartridge. but for this type of printer did not recommed to DTF it's hard to maintenance . if you have any more question just Message me ,thanks
I have the printer on sale with dtf supplies for 4500.00 shipped.
are you looking for a dryer ?
@@skyzhang I have over 300 Epson P6000 models. This is very convenient. Any way to make 110v?
@@brotherernest5993 please we just keep update the oven more better for work .if you are interest we can custom make one for normal p6000 model printer
whatsapp me +8615015164529
@@skyzhang I do not know how to find you on What's app
@@brotherernest5993 +8615015164529
How much is costing please
please WhatsApp me at +8615015164529 we will send more detail with pricing
@@skyzhang please check whatsapp
@@Trendzya please did you send message 😍
@@skyzhang yes sir alredy message you. Waiting for your reply.
This WILL NOT WORK with the Epson SC-P6000. The printer is too slow and the heater for per heating is too hot, even all the way down. The powder shaking is uneven. You will end up having to remake all your customer prints because there will be no powder and cured ink without powder. I tried for weeks to get this to work. Dont waste your money!
thanks for you Message. as you know normal P6000 is was for photo working only it' s have a normal stander. in fact we already work alots with modify P6080 P6000 with this dryer. you should set up a stander for printer. and here all the heatter have a control button ,can adjust the tempreatrue. please if you need any help can contact your seller or write to me.
P6000 only works in China for dtf
this not hard we already help some guys to change the board to P6080 and work with ARC chip .then it's connect with DTF.good quality only a little slowing print .why did you think it's only work within china?
@@skyzhang where do you get the boards from? EU boards record the serial numbers of the cartridges so arc chips do not work. where are the arc chips for sale?
@@skyzhang I convert 24 inch epson printers for dtf here in europe. if you can supply me with chinese boards I can start converting the p series printers also. Sell the dryer/shaker with it. Right now I only focus on the 7890/7900
I'm also looking for arc chips for 7890 if you sell those
@m wich one is good between p6000/p7890 please.