I just purchased a Mauser HSc Super made by Renato Gamba. This video is very helpful. The Italian HSc Super like mine are double stack mags so it's a little thicker and has a different location for the mag release.
EXCELLENT video. Thank you for producing! I didn't know how to field strip. I will never take mine down to this level. I would be afraid if I lost or broke something. I would never find a replacement part. I'm going to removed the grips and spray it down. Then lube and put away.
One good thing you can do in that scenario is to soak the gun in oil without the grips for a while, come back and do a good wipe down (The oil should have soaked into any crud and junk) ---> then lightly oil, clean the thing, and reapply those wood grips. They are great guns, and excellent shooters!
A reassembly would nice. My trigger spring came loose. It is either broke or slipped loose. Any suggestions on how to get that fixed without a complete disassembly?
sadly no --> the only way to really get to that trigger is to take the whole gun apart (minus the slide atleast! you can just pull that off) --> I think the way to get around UA-cam's gun assembly policies would be to just show assembly of very specific and small chunks... the videos would be absolutely short but it could possibly be done. UA-cam... of course... is vague and cruel on the rules and how they treat gun tubers.
Great video I found this very helpful understanding the HSC ,when are you going to do a assembly video also could you do a troubleshooting video on feeding problem the HSC has and how to correct it .I am noticing the round catches on the top of the feed ramp and sometimes the safety engages on its own when shooting this gun . Thank you
My gun was doing something similar with the round getting hung up, not so much on the safety issue. I think my problem was my feedramp was dirty. A good cleaning may help yours! As for the safety, maybe one of those de-tent pins is worn down or the spring is too weak?
Hello, after I renovated my weapon and replaced a few parts, I noticed that the bullet is only halfway in the barrel and sometimes it gets stuck. What could be the problem?
This video was certainly needed.....
I just purchased a Mauser HSc Super made by Renato Gamba. This video is very helpful. The Italian HSc Super like mine are double stack mags so it's a little thicker and has a different location for the mag release.
Your video is really, really good. Take your LIKE !!!!!!
EXCELLENT video. Thank you for producing! I didn't know how to field strip. I will never take mine down to this level. I would be afraid if I lost or broke something. I would never find a replacement part. I'm going to removed the grips and spray it down. Then lube and put away.
One good thing you can do in that scenario is to soak the gun in oil without the grips for a while, come back and do a good wipe down (The oil should have soaked into any crud and junk) ---> then lightly oil, clean the thing, and reapply those wood grips. They are great guns, and excellent shooters!
Very well-done video, you showed everything and explained everything perfectly. You also warned your patent LOL.
That was the one and ONLY warning!
A reassembly would nice. My trigger spring came loose. It is either broke or slipped loose. Any suggestions on how to get that fixed without a complete disassembly?
sadly no --> the only way to really get to that trigger is to take the whole gun apart (minus the slide atleast! you can just pull that off) --> I think the way to get around UA-cam's gun assembly policies would be to just show assembly of very specific and small chunks... the videos would be absolutely short but it could possibly be done. UA-cam... of course... is vague and cruel on the rules and how they treat gun tubers.
Great video I found this very helpful understanding the HSC ,when are you going to do a assembly video also could you do a troubleshooting video on feeding problem the HSC has and how to correct it .I am noticing the round catches on the top of the feed ramp and sometimes the safety engages on its own when shooting this gun . Thank you
My gun was doing something similar with the round getting hung up, not so much on the safety issue. I think my problem was my feedramp was dirty. A good cleaning may help yours! As for the safety, maybe one of those de-tent pins is worn down or the spring is too weak?
Another UA-camr has a reassembly video here: ua-cam.com/video/1w_j6IVJ7NQ/v-deo.html
Hello, after I renovated my weapon and replaced a few parts, I noticed that the bullet is only halfway in the barrel and sometimes it gets stuck. What could be the problem?
Donde puedo conseguir una auja percutora.
Is disconnector part necessary? Because i have lost it.
i'd talk to a gunsmith, but I am pretty confident that a disconnector is a critical component to a gun
Did you storage this pistol in bottle of oil?
hahah it looks pretty wet doesnt it?
LOL!!! 🤣 @9:15
Busco cargador para Mauser HSc pistola calibre .32 me encuentro en la Cd de Puebla, México.
I would love a re-assembly video, even if you had to email it to me.
Arma zeka
Save time , just dip your gun to gasoline, let it sit hour, , dry maybe hot water too..
Dry hair blower to get moisture then Apply light oil