Poco X4 GT / Redmi K50i / Redmi Note 11T Pro Disassembly Teardown Repair Video Review
Вставка
- Опубліковано 27 сер 2024
- Poco X4 GT / Redmi K50i / Redmi Note 11T Pro Disassembly Teardown Repair Video Review.
Repairability SCORE: 6.5/10 (breakdown of score @5:12 in the video)
Twitter: / pbkreviews
Instagram: / pbkreviews
Patreon: / pbkreviews
TikTok: / pbkreviews
Smartphone Tool Set: amzn.to/3P8yZuD
Smartphone Tool Set Deluxe: amzn.to/3qLq3AU
Home Tool Set: amzn.to/43ZmSUV
Other Tool Sets: amzn.to/43VzDQg
iFixit Isopropyl: www.ifixit.com...
Smallest Smartphone Thermal Camera: www.amazon.com... (use code PBKreviews for $20 off.)
Crypto Hardware Wallets: shop.secuxtech...
Adhesive: amzn.to/2XAvFga
300LSE Adhesive: amzn.to/3pSu40W
Heat Gun: amzn.to/2SOkS0x
Pry Picks: amzn.to/3YbBi0Q
Other Replacement Parts: www.etradesupp...?acc=c5ab0bc60ac7929182aadd08703f1ec6
i've been waiting this. thanks
You're welcome :)
Nice teardown 👌
Thanks!
Always interesting watching your work man..
Thanks! Glad you enjoy it.
thank you so much for making this video really helped a lot!
You're welcome
Whats the phone with the best cooling in your opinion?
Hi bro i have this phone and the headphone jack is kinda getting damage by daily usage so would it be possible to swap the old 3.5mm jack with a new 3.5mm jack ???
If not what can i do to fix the headphone jack ""please reply ""😢
What? I'm using the headphone jack everyday and it's still good
@@addie275 you don't use it like me 😂
I think Poco made some claims that they increased the cooling solution of this phone, but the vapor chamber seems more or less identical in size to the one in the x3 GT. No wonder this phone doesnt really perform well in terms of thermals, the D8100 is more or less left thermally unsupported.
The vapor chamber is longer in length, however the X3 GT looked to have more thermal paste in between the frame and the copper heat transfer tape on the back of the board. The X4 GT has a good amount of thermal paste underneath the copper tape between the processor and the copper film, but not so much between the film and the frame.
@@PBKreviews sir is glass affect the cooling system of a phone because phones with glass back like poco F3 seems to have great cooling system?
I'm using poco X3 nfc right now i would like to upgrade my phone what is your best recommend phone for upgrade? Im planning to buy F3 or X4 gt ☺️
@@adrianjuliano9744 Unless you need the headphone jack, I think the F3 is still a better deal overall, especially if you can still find one on sale. The F3 has the worse camera of the two, but you can install GCAM mod to get better processing for your photos(since the X4 gt has a mediatek chip, gcam will likely not work).
@@somayough ohh thx i watched decent comparison of both two phones and the F3 seems to have better optimisation but its limited in physical stores i might find online thanks ❤️
Thanks just fixed my phone. Wouldn't show charging 🔋 indicator stuck at 52% loose battery connection. I would mention in video when opening to be careful of finger print ribbon which could get cut with a plastic prying opening tool. Just below camera on left side!
no problem, glad it helped. yeah, you should be careful not to stick any pry tool too deep in to damage parts.
Hello sir what did you do? My poco x4 gt also stuck at 52% does not charge nor discharge but it is working. Should i just disconnect and reconnect my battery???
Nice teardown btw its detailed
Thanks!
This is what I was waiting for... Yesss
:) 👍
can i change the lcd of my redmi note 11t pro, with the lcd for poco x4 gt?
Thanks to you, I managed to replace the camera
Segui el video y llegue hasta donde lo dejo, necesito cambiar la pantalla, me falta ese paso
can i ask clarifications? is its frame made of plastic or aluminum? cuz currently i own poco x3 nfc for almost 3 yrs i guess?,and your teardown video convinced me to buy this one for a plastic back, aluminum frame and gorilla glass front is really my gold standard of build combination, my poco x3 had survived a lot of drops, rolls, bents and many more torture out there without a case, it's such a strong phone not even a scratch on screen or major dents on edges,, and im edging on this poco x4 gt for my upgrade though
It's a plastic frame
Frame and back are plastic and front has gorilla glass 5
Good is assemble ❤️❤️❤️🌷🌷🌷
👍
Ok. Thanks.
👍
Hye, thanks for the video.
Wanted to ask a weird question. Is it possible to mod the sim reader slot so that it can also read sd card? i can put any third party sim tray which has support for sd card.
I love this phone but sadly no sd card slot.
Hi, no I don't think it would work. Would not only require additional solder points on the board but additional resistors and such to detect and read, and also software mods I would assume.
@@PBKreviews thought so.
Thanks for the comment. I love this phone, but sadly no sd card slot :(
@@mokisan you can use sd card reader
thank you for this video, had a hard time trying to pry out the middle housing but it finally croaked. started at the weakest area (sim tray)
How did you but back de screen after you separated the phone and the screen?
Could you accidentally damage the microphone next to the USB input if you poke it with a sim tray tool?
I think newer phones don't have that problem
Does removing the sim card tray without powering off bad for the device even once?
nope
Hi
Can you find that where is test point of x4 gt?
whoa! no thermal paste between cooper and graphite film from the back. i wonder adding more thermal paste on front and back can improve thermal management
I don't think it would make too much of a difference for the back, since mainly the thermal paste will come into play for transferring the heat to and through the frame not so much the copper tape and graphite film on the back.
The Back is not good for cooling since it is made from plastic. As with many other phones the Display is the main heatsink.
what kind of adhesive do you use?
ua-cam.com/video/T4iiPUIM7-Y/v-deo.html
I wasn't able to find a replacement screen for a client, not even on Xiaomi official support stores, so availability is deffinitely bad right now (may very well be good in a few months)
They are available on ebay. When you search poco x4 gt lcd you will see listings for it.
@@PBKreviews Got it, it will arrive in one month, better late than never. Thank you very much!
Since the charging board is removable, do you think it is possible to make a diy upgrade from usb 2.0 to usb 3.2? I often plug my Poco X4 GT into my PC, and the transfer speeds are slow, not to mention hdmi adapters not working. I've heard that the chipset would limit the speeds, but since the entire sub board is removable, could this be circumvented?
I'm not sure since I'm not an expert in electrical engineering but I would assume just changing the port alone would not work since there are controller chips regulating it as well either on the sub board itself or the main board.
great video sir
Thank you :)
How long do thermal paste last in phones before replacing it ? I have realme gt neo 2.
not too sure honestly. There are many different types and kinds. Some last longer than others but again the length can also depend on how often your device is used or to what extent its used.
The thermal paste most definitely will outlast the phone's life span. On the computers it lasts for several years, 4-5 and more.
@@bgbore96 dont know bout that i use my phone more than 5 years depending if i really need the upgrade
@@kamwardmama-o2424 For that time you'll have to replace the battery once or twice. It's a good idea to replace the thermal paste also. Btw, what phones were you using that lasted that long?
@@bgbore96 samsungs mostly, my mi10t and mi 11 were literal garbage both have deadboots and have to replace the motherboard , after those 2 phone got repaired , i sold it right away, then got realme gt neo 2. since it has sd 870 very stable in long gaming sessions unlike the 888 and 8th gen 1.
Is it water resistant? Especially from the head phone jack area ?
It has a decent rubber gasket around it, so should provide some sort of water resistance.
@@PBKreviews thank you
I really need the redmi K50i back camera but only the 64mp one i couldn't find it anywhere 😮💨
Hello, I'd like to inquire, if bottom micro has some kind of protection or may be it is installed 90° towards the bottom edge? There is a point that firstly i inserted a simcard but then i needed another one to be inserted, and occasionally put the needle into the microphone's hole. I barely touched it and didn't push it further as i quickly understood it was the wrong one. However I'm a bit anxious of having smth damaged. Overall, i checked wether the micro works okay, and yeah, it does. But who knows, may be it can cause some problems with water/dustproof condition
Hi, no you will be fine. The filter and mic are both seated above the hole so they wont be damaged.
I have a question, do you have detailed photos of the sub-plate, where is placed the charger and the mic? Please!!
I don't, sorry and don't have the phone anymore to take one.
Hi,Where can I buy the same battery as the video please?
Brother one question... How much quantity of thermal paste should I buy to apply on Poco F1 phone.
Also if some paste is left over, can I apply it over camera and battery?
Not sure how much, usually they sell them in standard amounts which is more than enough for any application. However I wouldn't apply thermal paste to areas that it doesn't need to be like the battery and camera. Depending on each thermal paste compound, some are more conductive than others and if they leak into areas that you don't want them to be, they can short the phone or damage components.
@@PBKreviews thanks for replying Sir
2:53 is this the Dimensity 8100
That is the RAM which is seated on top of the Processor itself.
Battery size?
So my phone dropped a lot and the screen is falling out from the front... I wanna a take it to repairs but I wanna know something about it first since spare parts is Abit limited ig.. in here. ... As of now I have a rubber band to keep it together to make sure I'm not pulling a cable from somewhere in there
Strange.. on GSMarena site, F4 and X4 GT have a li-po, but both have li-ion battery...🤨
Hi. It is a li-po. The way they label the batteries, if its a li-po then its written lithium ion polymer, if its a li-ion then it will just said lithium ion. But either way the lithium ion potion is always labeled on the batteries.
is it possible to know the screen manufacture?
Good afternoon, can you give me an answer to the question why does the back cover creak in this phone?
On the other hand, where there are no volume buttons and a print, if you move the edge of the case, it will creak, what is this?
tq
Welcome 👍
Is the ram under the board? I hope it is not like poco x3 pro So that you don't destroy the rose quickly
Hello, Thanks for the video. I have one question. I have this device and I'm seeing a crack with small bump below the crack, just half an inch below the camera module. Is this a fauly battery or motherboard issue? Also what can be the probable cuase? Thanks!
It's possible it can be from a bloated battery. The cause can be many things, from drops to overheating or just a bad battery.
where is the proccesor located?
Hello, my phone is redmi note 11t pro and i dont know how the phone frame creaks opposite the power button when gently pressed. What happen if i glued it outside with B-700, will it reduce creaks when pressed?
Does adding a graphite film on the back of the phone cover dissipate heat?
It will help
Hi What's the other small hole for? Near the sim ejector hole? It's on the right side. Tnx
It's the microphone hole
I am here :D.
:) 👍
where can i find POCOX4 GT board ?
Are these components of lower quality than more premium brands?
yes
Does this phone have some like protection for dust and water splash?
no
what will happen if i missed my pin to mic hole?
can someone answer me please
Nothing, the mic is seated above the phone hole and it would not be damaged.
ty
Li-on battery??
Do you think this device can easily survive a humidity in the bathroom if you use it everyday? Since it has a rubber gaskets, I'm waiting for your comment
Hi brother you didn’t get infinix note 12 G96 if you get please let me know keep work hard🇵🇰💙👍🏻
Thank you. I haven't gotten one yet.
does it have split battery?
Hi, no looked to be a single
Good job
Thank you :)
Can you show where the 2 test points are located on the Poco X4 GT ?
My phone is constantly rebooting into tvpr recovery and cannot be booted into fastboot !
I want to try to flash it in edl mode .
Did you find where the test points are located? (I haven't been able to find them anywhere on the web)
Nó chỉ có 1 loa chính và loa thứ 2 chính là loa đàm thoại??? OMG
redmi k50i wifi ic price
I wanna ask if where are the thermal sensor of the X4 GT?
not sure
Redmi note 12t pro is the same right?
11t pro not sure about 12t pro
Heat dispatch is better this phone😮 India k50i
hello, i have a back cover hello, I have a poco x4 gt back cover that bends in the area near the inscriptions,this is normal??
Not sure how much your's bends but its plastic so it does have some flex to it.
Hi,i just want to ask if the motherboard is weak? the main issue of poco is deadboot im afraid that this phone is going to deadboot after a year,i just want answer if the motherboard is prone to deadboot or not
Что ты имеешь в виду?
Я просто заказал и теперь не знаю что делать
What do you mean, I've ordered now and I don't know what to do. Is he definitely breaking down?
@@1HACER2 wdym breaking down,but what i mean is poco past phones main issue is deadboot(like it just dies the reason is crappy motherboard) im wondering if poco x4 gt's motherboard also has bad architecture and is prone to deadboot
@@1HACER2 no need to worry bro just dont update your software when there is a update and your good to go
Nothing phone 1 teardown sir
will do it as soon as it comes in.
Nice!
Thanks!
Queria saber se existe dois ou só um alto falantes
2, one on top and one on bottom.
Hi where is test points?
dont know
I had to open the lid with a knife :( it didn’t work out any other way.😢😢😢
try using a suction cup tool with heat and lifting up to give you some leverage to get a tool in between.
I have this phone damaged by sea water corrosion.
I have removed the motherboard and I would like to know if it is possible to extract the data from the ROM memory. Can anyone give me information about this?
And does anyone know what chip is in the ROM?
Thank you so much.
There is a high chance the ROM would be damaged from corrosion as well rendering it useless, but even if it was good, you would need to find a specialty shop that can de solder and remove the ROM from the board and re solder it to another board. It wouldn't be cheap if even doable.
Ohhhhh the phone has graphite to transfer heat away from the chip... I was so scared when I played codm it just became so fricking hot, I thought the phone will explode bruh
lol no it won't explode, if it overheats it would probably notify you and it would either shut the device off or pause the activity until the phone cools down. But generally most phones will heat up since heat is being exhausted from inside out to cool off the components. :)
luv u
where is the liquid cool 🤮🤔
The liquid cooling is the vapor chamber you see @4:18 in the video
Why less thermal paste 😭
Not sure. There is a good amount in between the copper tape and the chips, but not enough in my opinion between the copper tape and the frame.
@@PBKreviews yea bro they need to assemble more precisely