I don't think so, I tried run Geekbench 5 outside where was cca 2 Celsius temperature, and I had cca 3505 points in multi-core test and 1113 points in single-core test. But in the previous test from home (22 Celsius temperature) I had 3007 points in multi-core test and 804 points in single-core points. So is only one explanation and that is massive CPU throttling.
My 11t pro stuck at 15%. Already reboot, charge while turn off and change charger, but all seems not working. Is there any solution for me? Because this is the third time happen and I already fix this for twice by sending repair. This phone really sucks and I cant buy new one rn.
Omg this just started to happen with mine since last week. I just did update to their latest HyperOS last month. Coincidence? Welp might not be, but I also think partly they're doing this intentionally.
I think is the high watt charger that heat thing Xiaomi phone up, I'm using redmi1022, just use powerbank as charger for now on cause just got it repaired battery after 1 year use
Me pasó el mismo problema ya lo envié a reparar 2 veces, pero ahora lo volví a enviar y no pueden dar con el problema, me dijeron que el Flex se carga funcionaba, cambiaron la placa base y tampoco era el problema
Hello dear friend, I really enjoyed your video and your professionalism, I bought this phone about a month ago and I am really satisfied with this phone in all respects, for showing the inside of the phone to us viewers of this You showed the video with full details, thank you very much... I hope you always achieve high grades in all stages of your life and your family, dear friend. 👍👌🙏😍❤️
Nice professional vid ✌🏼... Perhaps the only vid on youtube to teardown this phone.. *subscribed*!!. Also can you please tell me if the frame is made of metal or plastic?
Anyone who reads this, never use a metal pry tool especially when lifting up the PCB like that. Use plastic ones as much as you can to avoid damaging anything.
@@PBKreviews yes of of course, you are correct, but I am also thinking more about physical damage. From 2:30 using a metal pry tool like that to lift a board can easily damage something if it resists lifting so easily like it does here.
@@TheLemonyOrange ya thats true, but sometimes when certain parts are in tightly, plastic pry tools are either too thick to get in the space or to fragile and break. But yep always best to use plastic when possible :)
Love your video presentation, clear audio and good camera angles. Could you please tell us if Xiaomi 11t pro uses aluminum frame or mot? I could see any antenna band
Hey bro great video. I cracked my Xiaomi 11T Pro screen today and the screen is black and won't turn on. I'm not experienced enough to repair myself so i'm going to head around some repair shops tomorrow and see what can be done. How much do you reckon it would be? And what do you think was damaged for me to not even see any light now? The crack really isn't that big either.
Thanks! The screens run anywhere from $150 to $180 USD from the looks of it, so depending on what they charge for labor and such on top. Usually these screens with even the slightest damage or crack will not function anymore. Sometimes even hairline cracks in the corner not visible prevent the screen from operating.
I have had the 11T pro for a few months now. I absolutely love the phone esp the hyper charge capability. Cause of my negligence of discharging the phone to 0% and sometimes to 100% I'm worried about the battery degradation and that I will have to swap the battery sometime in the future. If I were to replace just the battery would I have to take out the boards? Thanks for your work.
Hi, no you would not need to remove the board. Once you have access to disconnecting the battery cable and any cable covering the battery, you can pry it off and replace it.
hi ! i need to change my sim reader / USBc daughter board, i ordered the piece itself but i'm not sure about what adhesive should i use. all i have is some "B7000 medium viscosity multi purpuse adhesive" from "Mechanic" i wonder if it's okay for a back panel or if i should use a double side tape adhesive ? thanks for your video, you make me so much more comfortable about fixing my stuff !
Excellent video and teardown. Can you advise if there are 2 or 3 mics installed? One is on the bottom speaker, one on the flash and is there any other on the top part of the mobile? Thanx.
The back is glass but made to look like aluminum. It has no bend do it and is heavier than plastic and definitely feels like glass. Also the midframe is aluminum alloy with plastic borders.
Hi! Do you have any idea where to find that plastic board with antenna and nfc? My husband had this phone and probably he hit the antenna somehow beacuse there is dent right on the same place you show on the video and say nfc antenna and the phone lost all bars and nfc is also not working..
Hi, I checked but couldn't find any available online. You can try contacting this seller on this listing and see if they are able to get it, since they sell the ones for the other models:www.aliexpress.us/item/3256803293201441.html?gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US
Hello! Do you think that the camera module is compatible with another xiaomi 108mp sensor as long as it is the same? My sensor does not focus anymore and i want to make sure it fits
Thank you for this video ! I have my power button stuck inside..can i repair it just with removing the plate , removing the rubber gasket and pushing the button? Or am i to follow all the steps on this video to get to the moment after the removing of the battery? Thanks
Hi, yes you can try doing that without having to remove all the parts, but be careful since the flex cable is fragile, and you don't want to tear or damage it. If you need to pull the clicker portion with flex cable out of the socket to be able to push out the button, just do it carefully so you don't tear it since the other end is under the motherboard and would be held in place if you have not removed the board and peeled that portion off the frame as well.
Mi xiaomi 11t pro dejo de reconocer la camara principal, compre el repuesto y lo cambie pero tampoco funciona 😢 alguien sabe si puede ser daño en la placa base y como arreglarlo?
Hey man! Ive had my phone now for atleast 11 months and i was wondering about battery safety and charging safety. I have never had problems with the 120w charger but most of times the phone did overheat. Do you suggest a 55w or less charger would be worth the money? Also what should be the max battery temperature for the phone
I'm not sure what the max temp would be but usually slower chargers also help retain the battery life for longer. Faster chargers will wear out the battery life sooner.
Hi! I would just like to get your opinion on the 11T's build quality. Do you think it is durable? If no cracking and shattering occurred after getting dropped or banged, is there any chance of having damaged and/or loose parts inside? I would love to hear what you think. Thank you so much!
Hi, i think its a solid and durable phone. Normal drops and bangs shouldnt cause parts to come loose but if its smashed against a wall or thrown heavily against the floor then there would be the possibility of broken internal parts or other damage. 😀
Hi, by plastic border, do you mean the outer silver border of the phone, the one sandwich between the front and back glass? no wonder there is no antenna line can be found on the frame.
Yes, the border of the phone. When you look at the disassembled phone, the frame you can see where the aluminum ends and the black plastic border begins.
You would need to remove the screws and top plastic cover over the motherboard, as well as disconnect the flex cable connecting the motherboard to the bottom sub board. then you can pry off the battery.
If I need to change only and just only the front frame, it implicates that I have to remove the screen with heat and use glue to put it back? There is only info about screen change but not the frame, also change the frame will damage the screen ? I just want to fix it bc of how it looks, but dont wanna broke any part that its working already
Hey dude! Good video, Very informative! I did a replace of my battery and now the phone is very unstable.. Shuts down and reboots and so on, do you have any pointers to what i should check/ replace?
i think ur thenonly person to do a teardown of the 11t pro. Not mentioning how good the video is! Damn you need more views by the way bro is the back glass or plastic and what about the frame
@@batsoupp its a good phone, but i would maybe wait to find a better deal on it if I was in the market for one. Price isn't too bad but maybe a month or two later if price drops a bit would be a better deal.
Great video man, how about build quality? Is same with poco f3? Or maybe better? With same frame made from plastic, i want upgrade from mi 10t pro, but maybe i hold to buy this.
I think this phone is not on par with mi 10t pro in many ways, I still believe that the best phones that Xiaomi made were in 2020 in terms of build quality and features.
@@Ahmed-Aref The large vapor chamber and charging speeds are a big upgrade compared to the copper heat pipe in the mi 10t pro. The frame of the 10t pro I prefer but at the end of the day I would definitely take the 11t pro.
@@PBKreviewsmust large vapor chamber for Sd888,,,,, but mi10t pro have SD 865 ,, not Necessarry large vapor chamber... Vapor chamber 1.0 enough for 865.......
@@rullyclub139 I guess but I wouldn't mind having more compared to less :) Would rather have a large vapor chamber even if it isn't necessary than to worry about over heating issues down the line with a small copper heat pipe.
Hi when the copper is peeled off. Will this need to be replaced ? I've followed the steps and replaced the battery. My phone now doesn't switch on. Any help is appreciated
You would need to remove the back plate, then screws on bottom cover/speaker assembly, and then remove that. At that point you would have access to disconnecting the screen cable from the sub board, then heat up the screen and pry it off the frame, apply new adhesive strip for the screen on the frame and re apply the new screen, reconnect the cable and re assemble the phone.
Good morning sir yes, really no comments your profession .yes you are really professionas engineering.yes im respect it and the smarts phone's MI 11 T PRO projects.yes best.🌹🤩💯🌟👏👍
You would need to use either this pre cut adhesive: www.aliexpress.us/item/3256804835207398.html?gatewayAdapt=gloMsite2usaPcglo2usa4itemAdapt or get a replacement battery door cover/backplate with the adhesive pre attached: www.ebay.com/itm/145028406835?hash=item21c45dde33:g:TskAAOSwwiVkM3iq&amdata=enc%3AAQAIAAAA4JnGRFKIS5Yxo2m%2FeGOA7sNGSMiyL5cqPg8opOoC7OZaC4bdzZqchO7%2BoHDnxgU2pkBnByBuHQ6SU7xCoMHWaDBotyzvt59e5VCpvA%2Bg0yjmIywuEHMTw5m9FOCFTgWThwnmx0mWd2N7211FaZIBlLwv1M7vIXjcE1PO%2FGqrFNW%2BEqNNWCWM62ABwApV3GFGiiaATR5Z7gSgd%2Bknj3i9tC%2FAOIwbJe%2BxWvkICtkxtjC8LA8oLlI%2FwKFwi8tfeSroIEO%2FWipbjUhqYgBk8y8PqAG159T7duERFCBqP%2BLHq8yI%7Ctkp%3ABFBM5MD156pi
Hi, I hope you will reply to me. I just want to ask if my phone(xiaomi 11t pro) needs to change new LCD because it has 3 green vertical lines that can't be remove. Thank you.
Mr. Which one is better than the quality of the battery? I want to change and everyone gives me another type of battery quality. Marek has a different quality of battery. OEM I want to change it, but what do you advise me to do? Thank you. I want an excellent type
You can search on this website and also search for the back housing, frame and other parts. www.aliexpress.com/premium/11t-pro-frame.html?d=y&origin=y&catId=0&initiative_id=SB_20220712224255&SearchText=11t%20pro%20frame&spm=a2g0o.detail.1000002.0
Please can you tell me which part i need when my vibration motor not working mi service center told me they change full motherboard of my phone then my vibration motor works please help me
Ciao mi potresti dire perché questo telefono fa un rumorino dove sta la fotocamera quando lo si appoggia su di un piano? Cosa c'è che si muove all interno?
Thanks! From what I have read, its only IP58 rated but I can't find any actual IP rating on the manufacturer website so not sure if it actually is IP rated or not.
Hi! I change the screen on my own and for aome reason the Bluetooth it's not working anymore, I tried everything software related to fix it witouth luck, do you know where is the Bluetooth hardware piece?
Make sure the motherboard is seated properly and the top plastic cover over the motherboard is screwed in place correctly since it has antenna lines drawn over it. And make sure the coaxial cables/wire cables are connected and not damaged. The bluetooth/wifi module would be under one of the covered shields on the motherboard
@@miumiu3437 I'm not 100% sure about the 11t but both 11t and 11t pro seem to be exactly the same aside from the different processor and charging speed. So I would assume both should be the same. Cooling is good.
If you re-apply the original pre cut adhesive, you will retain the IP cert. Usually replacement back covers/doors come with the pre installed adhesive.
Not sure, I put a picture of the chips that were visible in the video after cleaning off the thermal paste but any other chips under the covered shields I did not check since I don't want to damage the board prying off the shields.
Only the steps needed to gain access to removing the battery. You don't have to do any extra steps. You just need to remove whatever is in the way of you disconnecting the battery cable from the main board and prying the battery off.
This was a big help I wanted to open my phone just to remove a little bit of dust in the camera cover on front and back also to check if my bottom speaker is well connected cause its not working when I drop it and It came back after a few days the same thing happen again. Also my uw and micro lens cam isn't working
Usually the bottom speakers on the phones tend to be more powerful but it's not always the case. Also on this phone the size of the speakers seem very close, just the shapes are different.
Hi. My Xiaomi 11T Pro have been submerged in an almost 10 feet sludge tank for 5 days. Is there any chance it might survive? If yes, I would to try sending it for repair.
I'm pretty sure it should be the same and you should be able to swap boards. Only difference is the onboard processor but the board itself should be the same
You are the first person to teardown this phone 👍👍👍
👍👌😀
Yes.... Absolutely
@@rullyclub139 👍😀
@@PBKreviews sorry i sent you a message you can reply thanks
How much does that back panel cost?
I dont understand why this channel doesn't have 1M subscribers yet. The quality of the contents on this channel deserves a million subs.
Thanks for the support!
Yes, absolutely agreed
I agree with u
because influencer pseudo techtubers like MKBHD dominate this area. You don't need to be tech savvy or even smart to be successful on UA-cam.
Just subscribed and found your comment. 😅 Great content. Helped me a lot.
what a quality video! you clearly deserve more subs
thanks!
Thank you for your work! Very informative. :) I've been relieved that the cooling is more than okay :)
Thank you and you're welcome :)
Exactly
I don't think so, I tried run Geekbench 5 outside where was cca 2 Celsius temperature, and I had cca 3505 points in multi-core test and 1113 points in single-core test. But in the previous test from home (22 Celsius temperature) I had 3007 points in multi-core test and 804 points in single-core points. So is only one explanation and that is massive CPU throttling.
All this stuff means nothing when the phone throttle like a bitcj
My 11t pro stuck at 15%. Already reboot, charge while turn off and change charger, but all seems not working. Is there any solution for me? Because this is the third time happen and I already fix this for twice by sending repair. This phone really sucks and I cant buy new one rn.
Same here... What should do
same, watching to find out where the battery connector is because the problem seems to be there
Omg this just started to happen with mine since last week. I just did update to their latest HyperOS last month.
Coincidence? Welp might not be, but I also think partly they're doing this intentionally.
I think is the high watt charger that heat thing Xiaomi phone up, I'm using redmi1022, just use powerbank as charger for now on cause just got it repaired battery after 1 year use
Me pasó el mismo problema ya lo envié a reparar 2 veces, pero ahora lo volví a enviar y no pueden dar con el problema, me dijeron que el Flex se carga funcionaba, cambiaron la placa base y tampoco era el problema
I think the VC of Poco F2 Pro is way better. Thanks for showing us every component. I really love seeing integrated coolers.
You're welcome :)
Hello dear friend, I really enjoyed your video and your professionalism, I bought this phone about a month ago and I am really satisfied with this phone in all respects, for showing the inside of the phone to us viewers of this You showed the video with full details, thank you very much... I hope you always achieve high grades in all stages of your life and your family, dear friend. 👍👌🙏😍❤️
Thanks!
@@PBKreviews 🙏❤️
Nice professional vid ✌🏼... Perhaps the only vid on youtube to teardown this phone.. *subscribed*!!. Also can you please tell me if the frame is made of metal or plastic?
frame/border is plastic but the midframe is aluminum alloy.
just amazing, helped me to swap the damaged fingerprint. Thanks mate
You're welcome
Already subscribed your channel that's so great tq so much for the video, it's very helpful 🌹from Malaysian
Thank you for the support and you are welcome. :)
Anyone who reads this, never use a metal pry tool especially when lifting up the PCB like that. Use plastic ones as much as you can to avoid damaging anything.
That is correct but when everything is grounded and the battery cable is disconnected, there shouldn't really be much to worry about.
@@PBKreviews yes of of course, you are correct, but I am also thinking more about physical damage. From 2:30 using a metal pry tool like that to lift a board can easily damage something if it resists lifting so easily like it does here.
@@TheLemonyOrange ya thats true, but sometimes when certain parts are in tightly, plastic pry tools are either too thick to get in the space or to fragile and break. But yep always best to use plastic when possible :)
Love your video presentation, clear audio and good camera angles.
Could you please tell us if Xiaomi 11t pro uses aluminum frame or mot? I could see any antenna band
Hi thank you. Yes it has an aluminum alloy midframe with plastic border around the sides.
@@PBKreviews the same with the normal 11t?
Do i have to remove first the motherboard before the battery or it is ok to remove the batt first? I have plan to change my batt.
once you have access to the battery and disconnecting the cable, you can remove it. You don't have to remove the main board to replace the battery.
Hey bro great video. I cracked my Xiaomi 11T Pro screen today and the screen is black and won't turn on. I'm not experienced enough to repair myself so i'm going to head around some repair shops tomorrow and see what can be done. How much do you reckon it would be? And what do you think was damaged for me to not even see any light now? The crack really isn't that big either.
Thanks! The screens run anywhere from $150 to $180 USD from the looks of it, so depending on what they charge for labor and such on top. Usually these screens with even the slightest damage or crack will not function anymore. Sometimes even hairline cracks in the corner not visible prevent the screen from operating.
@@PBKreviews Thank you so much for your reply
@@Aumy2K you're welcome 👍
The video helped me a lot with my water damage. Thanks a lot!
I have had the 11T pro for a few months now. I absolutely love the phone esp the hyper charge capability. Cause of my negligence of discharging the phone to 0% and sometimes to 100% I'm worried about the battery degradation and that I will have to swap the battery sometime in the future.
If I were to replace just the battery would I have to take out the boards? Thanks for your work.
Hi, no you would not need to remove the board. Once you have access to disconnecting the battery cable and any cable covering the battery, you can pry it off and replace it.
Same
Just what I've been searching for... Thanks man!
Well, this video convinced me not to attempt to replace the battery myself lol.
The 17 screws alone made me stop on my tracks!
Thanks for sharing
lol, you're welcome 😃
Thank you for your work! Very informative....
hi ! i need to change my sim reader / USBc daughter board, i ordered the piece itself but i'm not sure about what adhesive should i use. all i have is some "B7000 medium viscosity multi purpuse adhesive" from "Mechanic" i wonder if it's okay for a back panel or if i should use a double side tape adhesive ? thanks for your video, you make me so much more comfortable about fixing my stuff !
Best explanation of handy's INSIDE ever Seen. Thank you.
You're welcome!
can you scratch test the side rails and tell me if they are metal with a paint layer or plastic?
do 11T have the same vapor chamber?
Excellent video and teardown. Can you advise if there are 2 or 3 mics installed? One is on the bottom speaker, one on the flash and is there any other on the top part of the mobile? Thanx.
Is the back really glass and the sides really aluminum? Some tech reviewers say that it's plastic made to look like glass.
The back is glass but made to look like aluminum. It has no bend do it and is heavier than plastic and definitely feels like glass. Also the midframe is aluminum alloy with plastic borders.
@@PBKreviews
The glass on the back is also Gorilla Victus?
@@marcin2211 That I am not sure.
@@marcin2211 glass 5 Sir
@@bonmarkbarrera8686 you are 100% sure about it ?
Are the sides made out of aluminum? Can you please tell and is the shinny too and bottom of the phone plastic?
amazing engineer im watching here, so entertaining
Thanks! :)
Hi! Do you have any idea where to find that plastic board with antenna and nfc? My husband had this phone and probably he hit the antenna somehow beacuse there is dent right on the same place you show on the video and say nfc antenna and the phone lost all bars and nfc is also not working..
Hi, I checked but couldn't find any available online. You can try contacting this seller on this listing and see if they are able to get it, since they sell the ones for the other models:www.aliexpress.us/item/3256803293201441.html?gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US
Hello! Do you think that the camera module is compatible with another xiaomi 108mp sensor as long as it is the same? My sensor does not focus anymore and i want to make sure it fits
Thank you for this video !
I have my power button stuck inside..can i repair it just with removing the plate , removing the rubber gasket and pushing the button?
Or am i to follow all the steps on this video to get to the moment after the removing of the battery?
Thanks
Hi, yes you can try doing that without having to remove all the parts, but be careful since the flex cable is fragile, and you don't want to tear or damage it. If you need to pull the clicker portion with flex cable out of the socket to be able to push out the button, just do it carefully so you don't tear it since the other end is under the motherboard and would be held in place if you have not removed the board and peeled that portion off the frame as well.
@@PBKreviews OK thanks, do you know where can I buy the power button? Is there a website of detached pieces?
Mi xiaomi 11t pro dejo de reconocer la camara principal, compre el repuesto y lo cambie pero tampoco funciona 😢 alguien sabe si puede ser daño en la placa base y como arreglarlo?
Hey man! Ive had my phone now for atleast 11 months and i was wondering about battery safety and charging safety. I have never had problems with the 120w charger but most of times the phone did overheat. Do you suggest a 55w or less charger would be worth the money? Also what should be the max battery temperature for the phone
I'm not sure what the max temp would be but usually slower chargers also help retain the battery life for longer. Faster chargers will wear out the battery life sooner.
@@PBKreviews thank you man ♥
Hi! I would just like to get your opinion on the 11T's build quality. Do you think it is durable? If no cracking and shattering occurred after getting dropped or banged, is there any chance of having damaged and/or loose parts inside? I would love to hear what you think. Thank you so much!
Hi, i think its a solid and durable phone. Normal drops and bangs shouldnt cause parts to come loose but if its smashed against a wall or thrown heavily against the floor then there would be the possibility of broken internal parts or other damage. 😀
Thank you so much for sharing your insight. I highly appreciate it :) .
There is a possibility of chip failure when falling. I fell, as a result, the network wire came off. I had to give it to the service center.
Hi, by plastic border, do you mean the outer silver border of the phone, the one sandwich between the front and back glass? no wonder there is no antenna line can be found on the frame.
Yes, the border of the phone. When you look at the disassembled phone, the frame you can see where the aluminum ends and the black plastic border begins.
@@PBKreviews i believe this is the same method they use on poco f3 right?
@@rainhujan92 Yes, correct.
Good video thank you. Id the phone water resistant ? Some specs show the M11T pro as IP68 and other spec show IP53.
where is the antenna for signal on this phone? is it on the mainboard or on speaker board?
just to change the battery i jusst need to remove those screws in the beginnign right?
You would need to remove the screws and top plastic cover over the motherboard, as well as disconnect the flex cable connecting the motherboard to the bottom sub board. then you can pry off the battery.
@@PBKreviews did it before i saw your answer. in any case it worked out. and in any case Thank you for your answer. :)
And it worked!!! amazing man!
Thanks!
If I need to change only and just only the front frame, it implicates that I have to remove the screen with heat and use glue to put it back? There is only info about screen change but not the frame, also change the frame will damage the screen ? I just want to fix it bc of how it looks, but dont wanna broke any part that its working already
yes you would have to pry the screen off which will probably damage the screen so not worth doing that.
Impressionante, Καταπληκτικό!
Hi bro i want to know that can we replace mi 11t pro battery with a new one if it got damaged or something else
is that copper paper need to be peel off and does it connect? can i cut it?
Hi, can you remove the battery first without removing the board first? Wanted to change my batt, but kinda scary if something goes south
Is the normal 11t made with the same materials?
Yes same
Hi does this have a mmwave antenna?
Hi, nope no mmwave antenna.
hi, do xiaomi 11T have same vapor camber like 11 T pro?
hope u reply thx ❤️
I know I'm late but it does 🥹
Hey dude!
Good video, Very informative!
I did a replace of my battery and now the phone is very unstable..
Shuts down and reboots and so on, do you have any pointers to what i should check/ replace?
U said the back plate is made of glass.. But many youtuber review said that it is plastic.. Can u comment about the back plate material
Official xaomi store said back plate was made from glass
It's glass. Plastic usually has a little bit of flex to it even if its really thick and you can feel the difference both in weight and texture.
@@PBKreviews
Is this same glass Victus on the back ?
i think ur thenonly person to do a teardown of the 11t pro. Not mentioning how good the video is! Damn you need more views
by the way bro is the back glass or plastic and what about the frame
Thanks! Back is glass and the frame is aluminum alloy with plastic border.
@@PBKreviews thanks bro do you think this is a good device for the price
@@batsoupp its a good phone, but i would maybe wait to find a better deal on it if I was in the market for one. Price isn't too bad but maybe a month or two later if price drops a bit would be a better deal.
Great video man, how about build quality? Is same with poco f3? Or maybe better? With same frame made from plastic, i want upgrade from mi 10t pro, but maybe i hold to buy this.
Thanks! I feel it is in par with the f3 maybe a little better design and quality.
I think this phone is not on par with mi 10t pro in many ways, I still believe that the best phones that Xiaomi made were in 2020 in terms of build quality and features.
@@Ahmed-Aref The large vapor chamber and charging speeds are a big upgrade compared to the copper heat pipe in the mi 10t pro. The frame of the 10t pro I prefer but at the end of the day I would definitely take the 11t pro.
@@PBKreviewsmust large vapor chamber for Sd888,,,,, but mi10t pro have SD 865 ,, not Necessarry large vapor chamber... Vapor chamber 1.0 enough for 865.......
@@rullyclub139 I guess but I wouldn't mind having more compared to less :) Would rather have a large vapor chamber even if it isn't necessary than to worry about over heating issues down the line with a small copper heat pipe.
Does it come with preinstalled screen protector? and is the proximity sensor a hardware one unlike the poco f3?
Yes, and has an actual hardware proximity sensor and not a virtual one.
@@PBKreviews o sensor de proximidade do poco f3 da uns bugs chatos demais.
@@PBKreviews too bad xiaomi decreased the performance of sd888 on this phone!
Hi when the copper is peeled off. Will this need to be replaced ? I've followed the steps and replaced the battery. My phone now doesn't switch on. Any help is appreciated
Realy good video i love it
Thank you, glad you enjoyed it!
Very good video. It was a complete teardown video. Where can I see the memory/storage chip component on the motherboard in this video?
Good day sir , i was wrong during i put my ejector pin in sim tray,, my ejector pin was put on mic hole, can be the reason of damage of microphone?
I like this disassembly. What components i need to remove to replace the screen or cracked screen.
You would need to remove the back plate, then screws on bottom cover/speaker assembly, and then remove that. At that point you would have access to disconnecting the screen cable from the sub board, then heat up the screen and pry it off the frame, apply new adhesive strip for the screen on the frame and re apply the new screen, reconnect the cable and re assemble the phone.
Good morning sir yes, really no comments your profession .yes you are really professionas engineering.yes im respect it and the smarts phone's MI 11 T PRO projects.yes best.🌹🤩💯🌟👏👍
Thank you!👍😀
which glue to use to put the backplate back in place?
You would need to use either this pre cut adhesive: www.aliexpress.us/item/3256804835207398.html?gatewayAdapt=gloMsite2usaPcglo2usa4itemAdapt or get a replacement battery door cover/backplate with the adhesive pre attached: www.ebay.com/itm/145028406835?hash=item21c45dde33:g:TskAAOSwwiVkM3iq&amdata=enc%3AAQAIAAAA4JnGRFKIS5Yxo2m%2FeGOA7sNGSMiyL5cqPg8opOoC7OZaC4bdzZqchO7%2BoHDnxgU2pkBnByBuHQ6SU7xCoMHWaDBotyzvt59e5VCpvA%2Bg0yjmIywuEHMTw5m9FOCFTgWThwnmx0mWd2N7211FaZIBlLwv1M7vIXjcE1PO%2FGqrFNW%2BEqNNWCWM62ABwApV3GFGiiaATR5Z7gSgd%2Bknj3i9tC%2FAOIwbJe%2BxWvkICtkxtjC8LA8oLlI%2FwKFwi8tfeSroIEO%2FWipbjUhqYgBk8y8PqAG159T7duERFCBqP%2BLHq8yI%7Ctkp%3ABFBM5MD156pi
Thanks for this informative video👍
many thanks for the video very informative
You're welcome 😃
Do regular 11t have same disassembly?
Hi, I hope you will reply to me. I just want to ask if my phone(xiaomi 11t pro) needs to change new LCD because it has 3 green vertical lines that can't be remove. Thank you.
Yeah would need a new screen
Mr. Which one is better than the quality of the battery? I want to change and everyone gives me another type of battery quality. Marek has a different quality of battery. OEM I want to change it, but what do you advise me to do? Thank you. I want an excellent type
Great work sir. I heard that 888 is locked in this mobile , is that true just to reduce the heating?
Thanks! I'm not too sure I havent really looked into that.
Nice video.are you think that this phone is batter for a long time.thanks
Yea should be a phone that lasts quite a while.
Thanks.zulfiqar , Pakistan
Can you re use the battery after it looks a bit different like when you pulled it out ?
yeah, the manufacturer and some people might say not to use it once its been removed, but as long as its not really warped or damaged its good to go.
@@PBKreviews thank you ill be safe then ;) . And then just some double sided tape in the new frame ?
And how do i get the fingerprint reader button out ??
My USB Port seems broken. Thanks alot for that Video 😄 now the search for the replacement
You're welcome :)
Good thing IR blaster is still present...best way to scare housemates using the IR blaster. LOL
Haha Yup!
Where could I buy the whole housing frame chipped top and bottom including back glass cracked ? all the way from South Africa
You can search on this website and also search for the back housing, frame and other parts. www.aliexpress.com/premium/11t-pro-frame.html?d=y&origin=y&catId=0&initiative_id=SB_20220712224255&SearchText=11t%20pro%20frame&spm=a2g0o.detail.1000002.0
Hello is there’s proximity sensor in 11t pro or software only
Hi, yes it has a physical proximity sensor.
Please can you tell me which part i need when my vibration motor not working mi service center told me they change full motherboard of my phone then my vibration motor works please help me
Hello bro I want buy mi 11tpro or black schark 4 which one you advice for all use please help me to select one phone
Ciao mi potresti dire perché questo telefono fa un rumorino dove sta la fotocamera quando lo si appoggia su di un piano? Cosa c'è che si muove all interno?
Is the back cover glass or plastic?
Does this has only one flash ? Are the other 2 flash LEDs fake ?
Muchas Gracias se agradece mucho Like 👍👍👍👍
Are the Xiaomi 11t and 11t pro have same hardware inside ? Except the chips and battery?
Is the build the same for xiaomi 11t version? Tia
Nice video,thumbs up..whats d ip rating for this phone?is it ip 67?
Thanks! From what I have read, its only IP58 rated but I can't find any actual IP rating on the manufacturer website so not sure if it actually is IP rated or not.
@@PBKreviews ok thank you👍👍
@@aleeazlee3457 You're welcome
The back glass, can it be transparent clear?
Hi! I change the screen on my own and for aome reason the Bluetooth it's not working anymore, I tried everything software related to fix it witouth luck, do you know where is the Bluetooth hardware piece?
Make sure the motherboard is seated properly and the top plastic cover over the motherboard is screwed in place correctly since it has antenna lines drawn over it. And make sure the coaxial cables/wire cables are connected and not damaged. The bluetooth/wifi module would be under one of the covered shields on the motherboard
Where can i find the gps module antenna?
Hi . khung của chiếc máy làm từ vật liệu nào ???
Hi, the midframe is aluminum alloy with plastic border around the frame.
@@PBKreviews đối với cả 2 phiên bản 11t và 11t pro đúng không bạn? Hệ thống tản nhiệt có tốt k?
@@miumiu3437 I'm not 100% sure about the 11t but both 11t and 11t pro seem to be exactly the same aside from the different processor and charging speed. So I would assume both should be the same. Cooling is good.
I have question xiaomi 11t 5g not pro version have thermal paste/pad just like xiaomi 11t pro or not?
Not sure, I haven't taken one apart but I'm pretty sure will be the same as 11t pro
I have a question, after reassembly does it still have the ip53 certification?
If you re-apply the original pre cut adhesive, you will retain the IP cert. Usually replacement back covers/doors come with the pre installed adhesive.
Subscribed 👍👍
👍😀
What is that long white cable on side for? I just broke it...
The coaxial cables are usually related to antennas and such.
I wanna to know the RF chip in 11tpro. Is it stiil Qualcomm SDR868 same as Mi11?
Not sure, I put a picture of the chips that were visible in the video after cleaning off the thermal paste but any other chips under the covered shields I did not check since I don't want to damage the board prying off the shields.
I hope u can reply
i only wanna replace the battery
Do I have to do all these steps?
Only the steps needed to gain access to removing the battery. You don't have to do any extra steps. You just need to remove whatever is in the way of you disconnecting the battery cable from the main board and prying the battery off.
This was a big help I wanted to open my phone just to remove a little bit of dust in the camera cover on front and back also to check if my bottom speaker is well connected cause its not working when I drop it and It came back after a few days the same thing happen again. Also my uw and micro lens cam isn't working
👍
What is the battery model for the Xioami 11 T pro
Is it my impression or the upper speaker should be less powerful than the lower one? Due to the size difference
Usually the bottom speakers on the phones tend to be more powerful but it's not always the case. Also on this phone the size of the speakers seem very close, just the shapes are different.
@@PBKreviews thanks for the info, I have a xiaomi 11T and sometimes I get that sensation, but it's minimal
Hi. My Xiaomi 11T Pro have been submerged in an almost 10 feet sludge tank for 5 days. Is there any chance it might survive? If yes, I would to try sending it for repair.
Hmm not sure, I would lean toward it not being recoverable.
Is the back made of glass?
yes its glass.
@@PBKreviews thx!
Sir I'm need Xiaomi 11t panel broken or u/s both acceptable
What do u do with this phones after the teardown
They are usually listed to be sold as disassembled units to recoupe costs for future videos.
Please can you tell me where CAn I order motherboard for mi 11t pro ??
can the battery be replaced? Because mine is at 70% battery health
Good video 🤴🏻🙌🏻💯 xiaomi 11T teardown🤷🏻♂️
Thanks! The 11T is the exact same aside from having a different processor and charging speed etc.
thanks for the information, you make very good content 🤴🏻🙌🏻💯
hello you who disassembled this phone give me to say is the noise that makes where the cam is when the phone I put it on the table. thank you
Sir please tell me the xiaomi 11 t and 11 t pro motherboard are same ? If same can i replace with each others ?
I'm pretty sure it should be the same and you should be able to swap boards. Only difference is the onboard processor but the board itself should be the same