How to Fix a Gas Mag Leak | Tech Talk 2

in this two minute video i explain to you smart boys how to fix your ssssssseeping gas blowback mags.
Follow up video for C02 mags coming at you shortly.
music by ASO: • Aso - Loungin

[@GusAirsoft]

Hey, hope this old ass video helped you save a buck on a new gas magazine.
Check out some of my newer videos.

[@niekverburg2969]

Thank you so much, just took apart my 2011 and changed a rubber band. She is running perfect now

[@zfr_rev6713]

What size o rings do the mags need

[@niekverburg2969]

@@zfr_rev6713 depends on the magazine

[@juz885]

Do you have any idea how to fix the top part mine leaks on the back side of the top where that button thing is the little o-ring fell out

[@Doile911]

Sooo i tried doing this, the valve just stops half way (still inside the magazine, not even a tiny bit out) and its REALLY hard to turn, now i didn't want to destroy the threads... is it possible it has thread lock on it from the factory?

[@CraZyBeAtz7]

Thank you! As a beginner, I was really sad when I found out my magazine was leaking. Thanks to you it is now fixed! Dropped a like 👍🏾

[@Thicc_Boi]

Definitely helped. Had no idea why the bottom was hissing

[@endorphfn7403]

Lol it’s a high 🐈a

[@kylethedalek]

Got a new mag, came with some gas in it.
I tried to refill it (and I did.) but it started leaking.
Not sure what to.

[@rhysholley8289]

This worked well for me. Bottom of my mag was hissing because I kept dropping it. Dang mag release button

[@ranchero5595]

Shame that you don't have many subscribers. You seem like you are definitely worthy of more subscribers than you have.

[@rata_ql7878]

Dude i repaired 1 of my aap-01 mags doing this, you save me from wasting money on an new mag thanks a lot

[@christiangedbagay7549]

You are a lifesaver bro. Just fixed my leaking mag now. Turns out, the O Ring in the screw of the mag dried up. Just put some silicone lube, and voila... Fixed right away.
For beginners out there, just use gas with silicone oil so you won't have a problem with dry o rings.

[@mohdzainyusairiyusof9577]

No need o ring?

[@raisatwika1232]

DUDE, i just fixed 3 mags for different guns each, i was considering buying new mags, you just saved me some money, THANK YOU

[@karadiszilveszter]

I prayed and it stoped leaking! You are probably the man of god cuz i prayed normally it didn´t work, i did this thing then prayed and it worked! Thank you!

[@user-nl2ci5rz9d]

This helped so much, thank you! Also, the problem in my mag was that it wasn't screwed on tightly, so if someone was wondering if their problem is not being solved, maybe you just have to screw it on more tightly.

[@Br0m4n]

Very good had a leaky mag where the base plate o-ring was dried out your video worked like a charm

[@lui_lui4988]

I thought I'd finally broken a tm mag cuz I've dropped it like multiple times now lol...but this fixed it!! it was leaking from the front bottom of the mag where the spring is to load the bbs. Thanks man

[@CoDCrafted]

Been down a mag for about 4 months and this fixed it! Didn't expect it to be so simple, thanks.

[@Turtletouchboys]

Thanks for a short and simple fix video no run around b.s worked perfect

[@kenwinlam]

Thank you so much! I really appreciate videos cutting to the chase

[@Sinister_Solace]

immediately fixed the leak I was having issues with. Thank you!

[@notaaron1482]

thank you man i did exactly what u said and all that was wrong with it is the air hole was loose, heres a sub :)

[@firedragon64gaming80]

Cheers man, video helped fix 4 of my pistal mags

[@ssj3inferno783]

Big help man appreciate it 😊

[@tunnelrat4461]

great video! took 5 minutes and now I have a non leaking hi capa mag

[@Flamey_Gaming]

You sir are a legend best feeling ever fixing your own gear

[@blackheim1528]

Thanks for the video, I just had to tighten the screw holding the base of the mag with an appropriate sized allen key.

[@Rebollozo247]

Thanks for the video. Find out the hard way my magazine was leaking during game play

[@grapemunchergaming7060]

So helpful bought a 2011 second hand of my mate and one of the mags was leaky did a quick troubleshoot using your video very quick and easy vid class lad

[@chrisjames9052]

Thank you. Just got my first BB gun .D/E . 50 after day 2 brand new starts leaking. Was going to send it back but will try this first😉

[@customizing09]

Great video! This helped a lot

[@vivelaresistance2526]

That was clean bro thanks for the insight all my gas pistol mags are leaky haha

[@jessonmallari7619]

I thought I need a new mag. Turns out I only had to lubricate the o-ring! Thank you for this.

[@BoredWithBen]

anything about a ssp18 mag? it has a valve close to the top as well and i thing that may be leaking

[@cidst8]

How do you fix C02 mags. I can’t get the bulb to seal while tightening it into the mag.

[@ATTE22]

Hey whats the other screw next to the valve? Should i tighten it

[@kaleblong7508]

wierd question but to replace the valve say only the top part of mine screwed out and the rest is still in there? where can i go to easily find a replacement

[@user-gi4mz3qh2q]

Done the job! Thanks

[@coizaragoza9052]

you r simply amazing.

[@dankoairsoft]

thank you so much

[@ypuuh]

my airsoft mag did this thing where i pushed the cap lock thingy and it got stuck in the mag and like the mag works and all but the cap isnt locked its like in the lock hole

[@funyongod]

I was trying to empty the gas from my GHK glock magazine but in expelling the gas, it shot out the rubber gas route seal from the top. I reinserted it back into the magazine after cleaning it off, but now the magazine won't hold gas at all. It doesn't just leak, the gas goes in from the bottom and equally expels out the top. Never had an issue like this before.

[@albertbeauchesne2882]

Thankyou. 3 mags fixed.

[@TousTarm]

man it worked thanks

[@judahking6776]

Thank you very much !!!!

[@spartazomb_yt]

Thankyou alot man

[@Rangersfan-ie3uc]

Fixed, thanks

[@archangel_yt8116]

See, both of mine are brand new. Is there another spot where it could be leaking from?

[@Fundaykidzz]

Thank you

[@nekorogers]

Where would one purchase a pack of both o rings?

[@jacobdad2742]

A lot of mags also have a piece at the bottom of the feed spring that you can pull up with a finger nail instead of using a pokie pokie tool.

[@obisfish]

I just got a new tokyo marui mag and its leaking out the top pls help me

[@riot7695]

You are my hero ❤❤❤❤❤

[@landontrackslt7362]

Yesirr I had a verry diffrent mag than you it eas a tiny valve like the size of a. Small screw but it still help when I lubed it bec it was dry and it worked thank you good sir

[@frostyskull8204]

thank you

[@Babukullivasara]

Thank you so much. Was about to get 2 mags fixed and it would have cost like 50€

[@Willytickler69]

Is the thing supposed to be dry or no

[@parlapipas25]

You are awesome 👌

[@CheesecakeJelloOnMyOrifice]

How do I know if my o ring is dry or what ev?

[@toptierfish9335]

I have a brand new oem sig 365 mag I got off eBay that’s leaking and I can’t find that 😢

[@prodigyvoltzz5286]

Still not fixed my leaking mag, it’s coming from where you put the gas in I’ve only just bought it today is there any advice you can give please?

[@DEADIKATED]

Same did you figure it out?

[@mrsnippay7637]

Most people will say thanks this helped
I will say nice moustache bro

[@zonkedairsoft]

So I tried fixing it with the gas valve, it seemed to work but now both the top AND bottom seem to have slight leakage. Anyone got tips for me?

[@Vasquezlj_au]

What if you cant insert the gas inside because i cant find a oring in the middle like yours. Remember the first thing you uncrew on the video, its in the middle of it and if i i force it it leak and frooze my hands and too much waste...

[@jungleghostsurvival]

We here at JUNGLEGHOST SURVIVAL liked and subscribed

[@Theweirdshack]

Can I use wd40 as the lube?

[@isaacking8457]

My glock mags were leaking this and a bit of silicon lube sorted it out thank lad

[@sarahames7713]

Thx bro worked

[@itsyohomie_1638]

Do anyone of you think i can use wd-40 white lithium grease instead of silicon?

[@frietje106fred6]

this helped a lot instead of get it to a store and pay 20euro for it

[@frietje106fred6]

i hava another gun maybe you can hel me with it aswell i cannot shoot it anymore unles i hold something and schoot it

[@shaquilleoatmeal4413]

Mine doesn’t have that release button on the bottom.

[@Jack-yz1ss]

I cant get the plastic plate thing back on

[@amaralrefaai6848]

I messed it up cuz of you, Tysm!!!! $50 to the drain 💀. I think I turned it too much and too hard it snapped on me

[@cazaestadosunidosth8162]

Skill issue

[@jefonjose1400]

Mine leaks from the back of my gun where u hold it from

[@youtubewolf6951]

The problem I have is when I shoot it leaks gas on the top it hisses very loud

[@XsForEyes]

thanks

[@Gavin12118]

What can I used besides silicate oil

[@itsyohomie_1638]

I’ve been looking on multiple different resources and they say you can use wd-40 white lithium grease

[@henrykwieniawski7233]

Also, nice video!

[@arandomman755]

thank you this helped to not have to take a 40 min drive to an airsoft store

[@samma1539]

This video saved me 50$

[@Daniel-vu4qu]

So ahh, what if its leaking from the top...

[@swidey6110]

I literally can’t get the pin out

[@JeekyWeeky]

my gas mag doesnt have a removable base plate :(((((

[@Digibullet32]

ima try thiw bought 2 m9 chromes to playt with my nephews and both pijss gas out so couldnt even shoot

[@Digibullet32]

we m9 chromes cost like 2590 a piece im very dissapointed cant play with either cause they piosskout gas

[@Viper-fw7cp]

How can you tell if your magazine is leaking from the valve or baseplate? I’m new to airsoft so I need a little help

[@therandomspeaker8525]

When you add gas to you’re mag it will leak out from the area where to inert your green gas

[@not-much8426]

My mag is brand new and its leakin

[@dinkleslap.v2687]

Thank you! i just saved a 100 dollar mag hahahah!

[@renedrost4764]

I dont have that sadly 😅

[@MrCool-kt9ht]

Mines leaks from the top

[@henrykwieniawski7233]

You kind of look like Riley from LinusTechTips!

[@mtbridingog9083]

Mine is leaking from the outside oring

[@airfrosty1314]

did you fix it?

[@mtbridingog9083]

@@airfrosty1314 nope .. I need to get a new fill neck for it.

[@chaseoutdoors7469]

Thanks you was going to buy a new mag 😢

[@Jojo-21781]

I done this with gas all in the mag still 😂😂🤦🏾‍♂️

[@sultannukukaicilpaparangan994]

Haai broth,

[@KOILSKE]

Thanks for the help mate +1 Sub from me

[@rashidveitia6591]

Using screw drive too often will f*#€ up your Valves , use a valve key , or send it to you tech airsoft shop

[@Pusher-Discipline]

1:15 is when vid starts

[@vaizualiz]

you save me 70bucks

[@gelenekymarian]

0

[@elikopokopo6443]

Why do i get a mini seizure every time he transitiones cameras

[@blackfederalgaming6419]

Know this is 3yrs old.. But thank you 🦾

[@roblucas9599]

Thank you

[@nightytoxicstotix5286]

Thank you