Can we give some big respect for Novritsch, because he actually takes time to address problems that go on with his products. True legend right here. Mad respect.
@@EyeOfArcadia Thats like saying "Microsoft should release Windows without issues!". Pure bogus! Tech and mechanical object need MAINTENANCE!!!! Especially airsoft products. Parts will wear and tear over time. For instance, a car. It needs a MAINTENANCE check from the dealer every X amount of time. You need to air your tires every X amout of time. Its called MAINTENANCE!!! i had to fix a goldmatch mag today. It just takes work to maintain it. Its not a problem, it works by design. Not all consumer products work wothout maintenance for 100 years. a especially airsoft!!!!!!!!!
@@chef7658 i currently have a piece of tape covering my mag because the hammer no longer strikes it. Its just a shotty product man. You can get better consistency just buying a drum mag
In contrast to gas you should release the CO² when storing the mag. Before you use it again, grease the orings like shown. Sometimes when mags are new the only need some silocone grease to seal.
I'm extremely grateful that you put this video up! I normally do not even comment on any channel whatsoever, but I had to give a shout out on saving me a lot of time, money and sheer frustration! LOL!I bought a key and silicone lube I was able to fix my magazines without a single hitch! Thanks again and God bless!
Thank you Novritsch, I have been struggling with this problem a while with my CO2 mags. I bought a new valve, and eventually a new mag but they both had problems. I tried tuning the tightness and everything i could think of to get this to work, i think greasing the crap out of the ring finally got it to seal on both mags. I love the ssp-1 and im hoping I'll actually get to use it more now.
Hi Novritch! I purchased a SSP1 about a year and a half ago and I decided to also purchase an extra mag for it. When the pistol arrived I loaded the mags with CO2 and the mag that came with the gun sealed amazingly and didn't leak at all. The spare mag on the other hand leaked most of the CO2 out. What confused me was that the CO2 leaked out at the bottom where the cartridge goes in. I tried again and I was able stop the leaking sooner by tightening the nut a lot harder. When I shot the mag, I only had about 30 shots worth of CO2 left in the cartridge. When I went to take the cartridge out, I had had to tighten it so much to stop the leaking that couldn't unsrcew it. I ended up putting it in a vice so I could actually loosen it. I sent your support team an email about the problem and they asked for a video. After sending a video of the problem they said to tighten the CO2 nut faster. The thing is, I'm tightening it quickly. And like I mentioned before, I had to tighten it way past the point the other mag (that came with the gun and seals perfectly) needed. I've watched just about every video on UA-cam about your SSP1 magazines and HiCapa magazines in general and have not come up with a solution. I kind of just gave up after your support team didn't offer much help. Since then I have just had the one magazine to run which doesn't make games very fun and it has also made me dislike airsoft a little bit. I love my SSP1 and have contemplated getting another mag for it but I'm afraid the same thing will happen again. So since I don't have money to just buy things that I can't be sure about I haven't purchased any more magazines. I am also slightly disappointed with your support team since I have heard good things about them. Thanks for reading this and I hope you can help! UC2 Studios
Hey Novritsch, please fix the ssp1 mags, the quality control sucks, they leak right out of the box, at 30 bucks a pop we shouldn't need to rebuild the damn things to get them to work, just like the rest of you its very frustrating. I appreciate the peeps that are posting the "how to fix" a leaking mag, Bought many of his items but losing faith in the company. A good company backs there products.
Thank you so much for your video there are not many out there that shows the CO2 taken out of the magazine cleaning and releasing pressure once again thanks
Guess I’ll have to get that tool at 1:25 because both of the magazines I bought for my ssp18 started to have that issue where it shoots co2 out the valve after about 2 weeks after purchasing. Maybe if they were a little more secure out of the factory I wouldn’t have had to spend another $40 on a product that would end up having the same issues…
@@swisscheesy1560 I ordered one for 3 euros on aliexpress, saw them on ebay as well. Gonna have to wait a bit but beats not having one at all. Just type in "valve key" and look for one that has 4 different keys in an X shape, one of them will be what we're looking for.
Wait a second, I just bought my SSP1, I live in the Desert, and I played with 3 CO2 mags, and one of the mags cannot hold the CO2, judging by this video. You are knowingly selling me and us poor quality and defective parts???? Now you're telling me that I have to buy additional tools just so I can use these mags properly???? Shouldn't they be working outta the box??? I don't understand this method of business??? All three of my brand new mags leak out of the box.....
Danny Rodriguez it’s the o ring on the bottom of the thing that pierces the c02 canister unscrew it with a big screwdriver and change the o ring or oil it and wrap the threads with plumbers tape that worked for me. It’s the o rings coming Taiwan no-good.
Do not put a o ring thicker then what’s in there or you’ll never get it out again if you do you’ll have to turn upside down and bang the shit out of it upside down to make it fall out again...not fun.
Danny Rodriguez any car parts store should have a container with an assortment or you could just oil the one you have and use that white plumbing tape for the threads...just add a couple of clockwise wraps to the threads and screw it back in and it should seal
Hi just recieved my ssp1 in march the co2 mag is leaking from the bottom. I tried putting the oil on the part that pierces the co2 like you show in the vid that didnt work. Turns out the O ring that is attached to the part that pierces the co2 bulb is perished and damaged you should show this in a vid its an easy fix
richie777711 hi ya I have the same problem with 2 out of the three I ordered as well then lost the one good one outa the ssp some how on the 2nd game...talk about crappy luck. How did you fix
@@smadello69 Hi on the CO2 mags look down the mag where the co2 goes in thats the stab valve. Get a wide bladed screw driver and unscrew it carefully. You will see an oring, this was damaged on mine. Get a replacement from any car/hardware shop (machine mart if you are in the uk) remove the old one put the new one on - make sure its not too big or you will struggle to get it back down the mag and it will be impossible to get back out again. Use some silicone oil to help. Worked on mine Good luck. Richie
richie777711 thanks Richie your a life saver for posting the same issue I wish novi would take notice of the fix you found it worked instantly for me so there is an issue with his manufacture because there have been lots of leaky mags I see online. Thanks again
I'm having the same issues. I just got mine today. I bought 3 megazines, and each one leaks...I'm wondering if I'm loading it wrong? because as soon as I screw the cap in and it breaks the seal of the cannister, it starts leaking and have white-ish foam by the cap. I tried screwing the cap tighter to get a better seal, nothing....
Benyamin David it’s the o ring on the bottom of the thing that pierces the co2 you need a big wide screwdriver or a grinder down wood chisel and unscrew the bottom piece out. Oil the o ring or replace it will one the same size not bigger or you’ll never get that piece out again then wrap the threads with plumber tape to seal the threads and that worked for me
I will rephrase the question what was the tool that you used to unscrew the cap on the CO2 magazine and is it necessary because my friend got Me one for my birthday and I do not know if it is necessary or not
i read the comments you people write and i can't believe you don't know or haven't heard about gun maintenance and that your airsoft replicas mostly break down or have malfunctions just because you don't clean and oil them properly. So I'm asking all of you if your car can run and run without putting oil in the engine and without fuel in the tank to run? Your replicas will last and work longer if you clean and lubricate them more often and the parts that wear out over time will last longer and even faster if they are not lubricated.
@@martijnvanrooijen7386 managed to fix it somehow I am able to unscrew the exhaust valve. And I'm going to buy the SSX23 as well because the ssp1 is more of a show off weapon in my opinion the SSX23 has better performance
@@michaelgonzalez2516 for my playstyle ID rather switch to the SSX23, not that the ssp1 is bad it's a great weapon but it's very loud and in a radius of 20 meters maybe more enemy's will hear you. Greengas is better if you want to have quicker refills but I want to play at different weather conditions as well and 1 co2 capsule can shoot about 2-3 magazines and depending on your playstyle I personally don't use it that much that I would have to change it as often as you'd think. You can't really say which is better because both have advantages and disadvantages but I prefer co2
Good instructions as far as they go but you left out a huge step of troubleshooting and fixing the seal between the co2 cylinder and the mag where the piercing needle is.
@@adamkordula9357 alright so I ordered one of the 3 sided fixers like he has, and did his exact steps and it fixed it, so order one of those (I got the link from a comment on this vid somewhere) and follow his steps
I dont know what happened to my ssp1 but one of my mags was mega leak and the gun like exploded gas lol, i think its a mag issue. My 2 mags can barely empty one mag without running out of gas, thank you for the tech support.
Maybe you have an alloy part of the capsule sticking in the exhaust valve and blocking it to close again. Get the valve out and clean it. Maybe you will need a new one because the plastic sealing is f+cked up by the debris
Whenever I try to refill my mag from the top the green gas just escapes and it dosent refill the mag. I have unscrewed the top valve and used silicon from the novritch maintenance kit. Does anyone have any ideas I’m gone be ordering a new valve anyway but is there a way to fix this thanks
Where can I buy that wrench? I can't find it anywhere. This cleaning and oiling procedure worked for my Umarex BB magazine. I removed the inner seal with a large screw driver no problem. It's reverse threaded and it was loose so between that and this procedure, it's working again. Now where can I get that wrench! :-)
I have not been able to find individual parts, only kits which I don't want to buy because I don't need all the parts they want to sell you. Do you know someplace where separate/individual parts can be ordered ?
Why won't yall cover the guide rod when yall knew yall had a manufacturing defect with the two piece rod? Your customer service has been far less than par. Does Novritsch not stand by his product?
Yo I need help does the gun not do very well in 10-20 degree temps when it shots it sounds strong on the first shot but it gets weaker the more shots and it runs out of co2 mid mag
I got a very similar Co2 pistol recently and the gas started leaking so I unscrewed the tank and it shot out, I lost the screw that holds the canister in. Does anyone know where I can get a replacement without replacing the mag, I’m going to get a spare anyway but I’d like to have another one.
Watch his maintenance vid on his website or find it on UA-cam, and when he disassembles the inner and outer barrel, skip from there to when he reassembles it, but use the no-orange tip barrel
It worked at first , but then I shot it and it started to leak again from the top. Not alot but I can hear the co2 escaping from the top of the mag. I have the crosman pfam9b
Ik heb de ssp1 nu 1 jaar en elke keer als ik wil spelen gaat naar 2 schoten alle co2 eruit en dat heb ik bij 1 mag dit filmpje al paar keer nagedaan maar El keer gebeurd het zelfde iemand ideeën?
www.amazon.de/ARMY-FORCE-Ventil-Schl%C3%BCssel-Softair-Magazin/dp/B07HCB8CRR/ref=sr_1_13?ie=UTF8&qid=1544192512&sr=8-13&keywords=ventil+key sorry it is the german site
Hello everybody! I bought me the ssp1 and I just shoot home a little bit with it.. But my actually Question is how can I remove the "gas" from my weapon? if I empty an entire magazine, gas traces remain on my weapon that look as if the traces were water that could not be removed (if you want to see photos just dm me on Instagram: Sefa.Dalkiran) this is not supposed to be self-promotion...It's serious question
is there no other way to make Green gas magasin its been around for many years now same with co2 always the same leaks and problem its so sad there is new things to make it better
Can we give some big respect for Novritsch, because he actually takes time to address problems that go on with his products. True legend right here. Mad respect.
I agree
Yup true
Man just don't release a gun with issues
@@EyeOfArcadia Thats like saying "Microsoft should release Windows without issues!". Pure bogus!
Tech and mechanical object need MAINTENANCE!!!!
Especially airsoft products.
Parts will wear and tear over time.
For instance, a car.
It needs a MAINTENANCE check from the dealer every X amount of time.
You need to air your tires every X amout of time.
Its called MAINTENANCE!!!
i had to fix a goldmatch mag today.
It just takes work to maintain it.
Its not a problem, it works by design.
Not all consumer products work wothout maintenance for 100 years. a
especially airsoft!!!!!!!!!
@@chef7658 i currently have a piece of tape covering my mag because the hammer no longer strikes it. Its just a shotty product man. You can get better consistency just buying a drum mag
Dude I run KJW pistols mostly, and this is super helpful thanks!
lol
Isn't the factory called KWC?
In contrast to gas you should release the CO² when storing the mag. Before you use it again, grease the orings like shown. Sometimes when mags are new the only need some silocone grease to seal.
I'm extremely grateful that you put this video up! I normally do not even comment on any channel whatsoever, but I had to give a shout out on saving me a lot of time, money and sheer frustration! LOL!I bought a key and silicone lube I was able to fix my magazines without a single hitch! Thanks again and God bless!
Novritsch you are a beast on and off the field! Thank you so much! Stay awesome!!
Thank you Novritsch, I have been struggling with this problem a while with my CO2 mags. I bought a new valve, and eventually a new mag but they both had problems. I tried tuning the tightness and everything i could think of to get this to work, i think greasing the crap out of the ring finally got it to seal on both mags. I love the ssp-1 and im hoping I'll actually get to use it more now.
Hi Novritch! I purchased a SSP1 about a year and a half ago and I decided to also purchase an extra mag for it. When the pistol arrived I loaded the mags with CO2 and the mag that came with the gun sealed amazingly and didn't leak at all. The spare mag on the other hand leaked most of the CO2 out. What confused me was that the CO2 leaked out at the bottom where the cartridge goes in. I tried again and I was able stop the leaking sooner by tightening the nut a lot harder. When I shot the mag, I only had about 30 shots worth of CO2 left in the cartridge. When I went to take the cartridge out, I had had to tighten it so much to stop the leaking that couldn't unsrcew it. I ended up putting it in a vice so I could actually loosen it. I sent your support team an email about the problem and they asked for a video. After sending a video of the problem they said to tighten the CO2 nut faster. The thing is, I'm tightening it quickly. And like I mentioned before, I had to tighten it way past the point the other mag (that came with the gun and seals perfectly) needed. I've watched just about every video on UA-cam about your SSP1 magazines and HiCapa magazines in general and have not come up with a solution. I kind of just gave up after your support team didn't offer much help. Since then I have just had the one magazine to run which doesn't make games very fun and it has also made me dislike airsoft a little bit.
I love my SSP1 and have contemplated getting another mag for it but I'm afraid the same thing will happen again. So since I don't have money to just buy things that I can't be sure about I haven't purchased any more magazines. I am also slightly disappointed with your support team since I have heard good things about them.
Thanks for reading this and I hope you can help! UC2 Studios
Try putting a ton of silicon in the magazine on the valve that piercing the cartridge. That usually helps me when this happens.
Same exact thing happened to me. I’m going to try and purchase a new thing that’s screws in the bottom (that secures the co2) and hopefully that works
Thank you so much novritsch you saved me so much money I thought I'd have to replace them your the best
Hey Novritsch, please fix the ssp1 mags, the quality control sucks, they leak right out of the box, at 30 bucks a pop we shouldn't need to rebuild the damn things to get them to work, just like the rest of you its very frustrating. I appreciate the peeps that are posting the "how to fix" a leaking mag, Bought many of his items but losing faith in the company. A good company backs there products.
Thank you so much for your video there are not many out there that shows the CO2 taken out of the magazine cleaning and releasing pressure once again thanks
Hat geholfen das Ventil rauschzuschrauben und zu säubern.
Super Tipp danke!!! 🤩
The valve turned out to be all that was needed. Great and thorough video.
Where do u buy it
@@hebuggin3599 eBay.
www.ebay.com/itm/402334276668?hash=item5dacfddc3c:g:jhMAAOSwY-NdpXgx
@@BrainDecrease Thank you, but do they also sell on Amazon by any chance? I don't really know what yo search for
@@hebuggin3599 they're there too. Search for 'Airsoft Valve Key'
A good straightforward video. Getting down to business right away!
I was going to use this as a prop for a short film but now my whole house smells like CO2
Guess I’ll have to get that tool at 1:25 because both of the magazines I bought for my ssp18 started to have that issue where it shoots co2 out the valve after about 2 weeks after purchasing. Maybe if they were a little more secure out of the factory I wouldn’t have had to spend another $40 on a product that would end up having the same issues…
Do you know where to buy it?
@@swisscheesy1560 I ordered one for 3 euros on aliexpress, saw them on ebay as well. Gonna have to wait a bit but beats not having one at all.
Just type in "valve key" and look for one that has 4 different keys in an X shape, one of them will be what we're looking for.
Thanks. I fixed my Beretta 92A1 magazine following your instruction. Thank you.
I was right about to throw out my 1911 clip thanks man
6:04 - 6:10 lol :)
Soooooo many innuendos
Lmao
“You can also use a used one and you take it out again until you have enough lube on the rubber seal”
@bojan desmaels The only reason we understood is because we grew up smh
Gotta love the nose shot at 8:26
I bought the valve key hoping that the magazine would've been a bit lose but no co2 still blast out
Wait a second, I just bought my SSP1, I live in the Desert, and I played with 3 CO2 mags, and one of the mags cannot hold the CO2, judging by this video. You are knowingly selling me and us poor quality and defective parts????
Now you're telling me that I have to buy additional tools just so I can use these mags properly????
Shouldn't they be working outta the box??? I don't understand this method of business???
All three of my brand new mags leak out of the box.....
Danny Rodriguez it’s the o ring on the bottom of the thing that pierces the c02 canister unscrew it with a big screwdriver and change the o ring or oil it and wrap the threads with plumbers tape that worked for me. It’s the o rings coming Taiwan no-good.
Do not put a o ring thicker then what’s in there or you’ll never get it out again if you do you’ll have to turn upside down and bang the shit out of it upside down to make it fall out again...not fun.
@@smadello69 where does one purchase spare o rings?
Danny Rodriguez any car parts store should have a container with an assortment or you could just oil the one you have and use that white plumbing tape for the threads...just add a couple of clockwise wraps to the threads and screw it back in and it should seal
im having the same issue. I'm actually discussing it above with JGMS Bullseye69
Hi just recieved my ssp1 in march the co2 mag is leaking from the bottom. I tried putting the oil on the part that pierces the co2 like you show in the vid that didnt work. Turns out the O ring that is attached to the part that pierces the co2 bulb is perished and damaged you should show this in a vid its an easy fix
richie777711 hi ya I have the same problem with 2 out of the three I ordered as well then lost the one good one outa the ssp some how on the 2nd game...talk about crappy luck. How did you fix
@@smadello69
Hi on the CO2 mags look down the mag where the co2 goes in thats the stab valve. Get a wide bladed screw driver and unscrew it carefully. You will see an oring, this was damaged on mine. Get a replacement from any car/hardware shop (machine mart if you are in the uk) remove the old one put the new one on - make sure its not too big or you will struggle to get it back down the mag and it will be impossible to get back out again. Use some silicone oil to help. Worked on mine
Good luck.
Richie
richie777711 thanks Richie your a life saver for posting the same issue I wish novi would take notice of the fix you found it worked instantly for me so there is an issue with his manufacture because there have been lots of leaky mags I see online. Thanks again
I'm having the same issues. I just got mine today. I bought 3 megazines, and each one leaks...I'm wondering if I'm loading it wrong? because as soon as I screw the cap in and it breaks the seal of the cannister, it starts leaking and have white-ish foam by the cap. I tried screwing the cap tighter to get a better seal, nothing....
Benyamin David it’s the o ring on the bottom of the thing that pierces the co2 you need a big wide screwdriver or a grinder down wood chisel and unscrew the bottom piece out. Oil the o ring or replace it will one the same size not bigger or you’ll never get that piece out again then wrap the threads with plumber tape to seal the threads and that worked for me
tighten up the bottom part helped for two of my ssp1 gas magazines thanks!
Perfect out of the box....my Harry arse....STAND BY YOUR PRODUCT AND HONOR YOUR WARRANTY.....
Does this work if the gas just shoots out of the top as you put it in?
Should work
i live in turkey but there was no one to do what you told here, i solved the gas leak problem by watching your video thank you very much
Silicone grease is the best option, oils didnt work well for me.
I will rephrase the question what was the tool that you used to unscrew the cap on the CO2 magazine and is it necessary because my friend got Me one for my birthday and I do not know if it is necessary or not
This vid saved my day cuz i’m such a noob that I didn’t know any of this stuff and I thought that my mag was broken lol
i read the comments you people write and i can't believe you don't know or haven't heard about gun maintenance and that your airsoft replicas mostly break down or have malfunctions just because you don't clean and oil them properly. So I'm asking all of you if your car can run and run without putting oil in the engine and without fuel in the tank to run? Your replicas will last and work longer if you clean and lubricate them more often and the parts that wear out over time will last longer and even faster if they are not lubricated.
my CO2 magazine is leaking at the top and im not able to unscreaw the exhaust valve... help xD
got the same problem i think. all the gas comnes out of the top when i install the casule to the mag.
@@martijnvanrooijen7386 managed to fix it somehow I am able to unscrew the exhaust valve. And I'm going to buy the SSX23 as well because the ssp1 is more of a show off weapon in my opinion the SSX23 has better performance
PercyV99 which is better gas or co2? I am getting my first gun which is the ssp1. Should I get the gas version or co2 version
@@michaelgonzalez2516 for my playstyle ID rather switch to the SSX23, not that the ssp1 is bad it's a great weapon but it's very loud and in a radius of 20 meters maybe more enemy's will hear you. Greengas is better if you want to have quicker refills but I want to play at different weather conditions as well and 1 co2 capsule can shoot about 2-3 magazines and depending on your playstyle I personally don't use it that much that I would have to change it as often as you'd think. You can't really say which is better because both have advantages and disadvantages but I prefer co2
Do you know where to get the tool you need to unscreaw the exhaust valve?
honestly just have more issues trying to even get past the cap at the bottom. Really difficult to press the metal button down and get it to slide.
Good instructions as far as they go but you left out a huge step of troubleshooting and fixing the seal between the co2 cylinder and the mag where the piercing needle is.
Ummm what should I do if the c02 is spraying out of the purple nozzle part of the magazine near the top?
i have the same problem and non of this is helping
@@adamkordula9357 alright so I ordered one of the 3 sided fixers like he has, and did his exact steps and it fixed it, so order one of those (I got the link from a comment on this vid somewhere) and follow his steps
I dont know what happened to my ssp1 but one of my mags was mega leak and the gun like exploded gas lol, i think its a mag issue. My 2 mags can barely empty one mag without running out of gas, thank you for the tech support.
You need to make a new magazine and make them not jam
ask KJ works LOL
Bro you just saved me some cash, Thank You!
Thanks
Great video Sir
Can you please tell the name of the tool you are using to unscrew the valve so I can buy it..
Many thanks
I also want to know where to buy this tool or at least tell me the sizes I need
I am really disappointed, it still don’t work after I have bought the maintenance kit and now I need to wait 7+ days for a new magazine
Thanks bruh for the help, cause I had this issue for like a week and I didn't really know how to deal with it
When I shoot my green gas gun gas comes out the back of the gun when I shoot, any ideas? And it only shoots like 2 before it’s out of gas
First time shooting also
man you really just saved me omg
The thing you unscrew is stripped in mine. How do I get it to unscrew? Please help!
Mine shot out all the CO2 at once what do I do?
Imma Watch tighten the screw faster when you put the co2 in
I try that but it just go out again
Maybe you have an alloy part of the capsule sticking in the exhaust valve and blocking it to close again. Get the valve out and clean it. Maybe you will need a new one because the plastic sealing is f+cked up by the debris
Is that valve tool universal for other magazine ? , I have a heckler app& Koch usp. Thanks.
Thank you!
Thank you. You helped a lot. Very useful information and "lesson". :)
Are those mags entirely made of *ALLOOOOMINNIUMM?*
I couldn't make it out the name of this tool. What's its name? Where can it be purchased?
Whenever I try to refill my mag from the top the green gas just escapes and it dosent refill the mag. I have unscrewed the top valve and used silicon from the novritch maintenance kit. Does anyone have any ideas I’m gone be ordering a new valve anyway but is there a way to fix this thanks
as it has proven to work on green gas, I don't want to use it on CO2 ampoules
Where can I buy that wrench? I can't find it anywhere. This cleaning and oiling procedure worked for my Umarex BB magazine. I removed the inner seal with a large screw driver no problem. It's reverse threaded and it was loose so between that and this procedure, it's working again. Now where can I get that wrench! :-)
I found the tool. It's called a "Valve Key". www.evike.com/products/42428/
I have not been able to find individual parts, only kits which I don't want to buy because I don't need all the parts they want to sell you.
Do you know someplace where separate/individual parts can be ordered ?
My mag leaks everywhere immediately after adding green gas and is coming out of all areas of the mag, is it too far gone or still fixable?
If it’s actually leaking from everywhere sorry to say you may just have to buy a new mag
@@Mrcrabs0 Damn alright, thanks
Where can i buy 1 of those tools? I have like 7 or 8 dead sr92 magazines that need fixing
I have a question what tool do you use to put in the CO2 Cartledge
You will get it if you order co2 magazine
Martimos ok
Would this method work for co2 mags for any pistol?
I used a screwdrive on the co2 magzin workd great
i tried to fix it many times at the bottom o ring but it still leaks!
what is wrong??? do i need a new mag?
Guys is an ssp1 co2 version different with an gas version of it so I can fit an gas mag inside the co2 version of the ssp1
What Is the mame of the tool?
Thank you so much!!!
What size orings?
My gas mag was Brand new kind pissed
Yeah when mine came in the mail it immediately leaked
@@suupi9156 I just put an o ring over it because it sometimes bends and i put tape over the gas insert
Hello there... can I use WD-40 Specialist Silicone Spray ? ...........
Mein Frage, wenn ich Sie CO 2 SSP1 wähle ist es möglich die SSP1 trotzdem mit Gas Magazine zuspielen?
i have problem on CO2 mag the co2 cames out around the threaded cap as o tight it up
Why won't yall cover the guide rod when yall knew yall had a manufacturing defect with the two piece rod? Your customer service has been far less than par. Does Novritsch not stand by his product?
what if still hissing at the bottom after i did that
Why can’t you do other guns also? I mean after you posted everything about your guns there will be nothing to post right
Cool this video helped a lot thx novritsch
My magazine was broke on arrival...not a good look for this system
What screw at the bottom of the mag do you use for your green gas mag?
Thank you, this helped so much.
Dude my c02 wont drop out of my mag!!!
Tap the base with a hammer
Grab a drill
Wo kann man dieses Werkzeug Kaufen??
if he wants to take an airsoft gun or a ssp1 pistol to take gas or co2 What is the best
Gamerul AndreiRo77
Co2 is better for winter and the co2 also has more power
Wich is best for price because co2 cartridges are quite expensive
Yo I need help does the gun not do very well in 10-20 degree temps when it shots it sounds strong on the first shot but it gets weaker the more shots and it runs out of co2 mid mag
my mag leaks from the bottom where i put the gas in and it leaks from the side of the inside
I got a very similar Co2 pistol recently and the gas started leaking so I unscrewed the tank and it shot out, I lost the screw that holds the canister in. Does anyone know where I can get a replacement without replacing the mag, I’m going to get a spare anyway but I’d like to have another one.
my ssp1 co2 mag still leaks from the bottom, any ideas??
Do a installation video on the ssp1 replacing the orange tip
TSS Invited it would be so useful for me :c
Watch his maintenance vid on his website or find it on UA-cam, and when he disassembles the inner and outer barrel, skip from there to when he reassembles it, but use the no-orange tip barrel
Lol I bought the black barrel too
That would be illegal in anerica
America
how many magazines should you be able to shoot with a new CO2 cartridge? I'm only getting about 2 mags. is this normal?
It worked at first , but then I shot it and it started to leak again from the top. Not alot but I can hear the co2 escaping from the top of the mag. I have the crosman pfam9b
On the co2 just put Plumbing tape on the threads
Yo i wanna buy the gun but I dont know if I should take Gas oder CO2... can anyone help me?
CO2 is for colder weather and shoots a little harder gas is better for cqb
Ik heb de ssp1 nu 1 jaar en elke keer als ik wil spelen gaat naar 2 schoten alle co2 eruit en dat heb ik bij 1 mag dit filmpje al paar keer nagedaan maar El keer gebeurd het zelfde iemand ideeën?
mine seem like it shoot or use the gas to fast i only able to get only about 3 shoots and then it just stop and i have to put more gas in it
Wo kann ich dieses Tool bekommen mit dem ich das problem bei Co2 magazinen löse? In eurem Shop offenbar nicht. Wie nennt man das tool denn?
what's the name of that tool and where can i get it?
www.amazon.de/ARMY-FORCE-Ventil-Schl%C3%BCssel-Softair-Magazin/dp/B07HCB8CRR/ref=sr_1_13?ie=UTF8&qid=1544192512&sr=8-13&keywords=ventil+key
sorry it is the german site
www.amazon.com/SportPro-Force-Magazine-Charging-Airsoft/dp/B071957DV2/ref=sr_1_4?ie=UTF8&qid=1544192679&sr=8-4&keywords=valve+key
Oh my god... "when it leaks, get 3000 liters of oil to magazine".... when you replace O rings, it will be better and it will work... very funny video.
Hello everybody!
I bought me the ssp1 and I just shoot home a little bit with it.. But my actually Question is how can I remove the "gas" from my weapon? if I empty an entire magazine, gas traces remain on my weapon that look as if the traces were water that could not be removed (if you want to see photos just dm me on Instagram: Sefa.Dalkiran) this is not supposed to be self-promotion...It's serious question
Thank you! very useful
thank you
does novritch still sells upgrade parts for other sniper rifles?
* upgrade kits
Yeah he sells tuning kits or upgrade kits for other snipers
Where to get that tool with the two tiny nubs?
This was very helpful thanks
is there no other way to make Green gas magasin its been around for many years now same with co2 always the same leaks and problem its so sad there is new things to make it better
Hey can someone put a link to this tool to tighten the air thingy