Backup your DVD collections with WinX DVD Ripper: bit.ly/34r1g81 (Sponsored by Digiarty Software) Convert/Save Disc (CD/DVD/VCD) Files To Media Files (MP3/MP4) - Back Up Your Memories - ua-cam.com/video/llJnjogK768/v-deo.html
Thank you so much! Your series is a lifesaver. It certainly beats spending $120 to replace my multi-region DVD player. Bright Blessings to you & yours!
I just tried the same procedure on a philips blu ray. Worked like a charm. I do think however that the sled (on which the lens head moves) had accumulated some dried up dust and that was the real issue in my case. Many thanks
Nicely done, but I have one suggestion. Before calling customer service or anything like that, check the board for corrosion or if any of the connectors are loose
its the center disc hub the felt get's worn down and "slippery", either take the drive aprt or add using a Q-Tip rubbing achohol to center of dvd and insert it fast
Cleaning the lens doesn't work all the time, you need to slightly increase the voltage to the lens from the pot/s on the circuit board. And 10 min to remove some screws? Really??
At first I thought your method didn't work because each time I closed the drawer it would open back up but then I hit the power button to turn it off because it closes the drawer and it stays closed. Then when I turned it back on with the play button it started working immediately. Thanks a lot for your help.
Doesn't matter what screw driver he used, it worked didn't it. I used a damn pocket knife lol. Does it really matter what he uses lol. Ppl will complain and critique anything.
Hi Akshay, I have a question. My Toshiba DVR630KC model VCR/DVD player will not load a disc. I took it apart and cleaned the lens and it still won't load. Any advice on how to fix this problem? Thanks Michael Newell from Niagara Falls, Ontario, Canada
Akshay!! So cleaning off the lense has now got my DVD player to accept the disc. It no longer says "no disc" and the time comes up on the front of the DVD player BUT now when I hit play it immediately stops and won't play the DVD still.. Any suggestions?
I believe you might be right! Doesn't look like anything blocking it but may just be damaged altogether! Thank you so much for this video and for your continued help!! Although I couldn't fix this one I was able to fix another one with the help of your video! Thanks again!!!
I think its an IR laser, so your cell phone can visually see it. If this is the problem is it easy to check. Just turn on your digital camera, and point it at the laser(not directly!) if you can see it, it is on. If the surface is smooth, you're good to go. I was hoping for a really in-depth characteristic video where it shows common fail points, and also what everything should look like under electrical test. Instead it was standard tier 1 tech support. I think most people who end up on here have already tried the CD cleaner/is it plugged in options...
Your instuctional video worked for me! I was about to junk my dvd player and buy another, but now it's playing the very dvd it stopped playing when i first noticed the problem! Thanks much and God bless...
Dear sir, My DVD has a specific issue i.e it play all audio discs but don't play video discs from original manufacturing company. Like YRF, SONY BMG etc. It shows up 'no disc' do you have any solution?
Try another video CD. Or use Philips Lens's Cleaner. If still doesn't work then there will be some problem in decoding circuit or Lens itself. Take it to service.
Try to clean the disc tray and laser carefully like this In the video. For most people, this works. If it didn't work then you need to visit a technician and replace the tray assembly.
Larry Osterkamp, a lot of those DVD cleaners don't work. It depends on the environment where the DVD player is at. If you are working on a DVD player where the owner smokes, the commercial DVD cleaners won't help.
+SK Channel So you can put HD movies/ videos and play it directly at full hd. Some DVD players still doesn't supports MP4. You need MPEG 2 or AVI video file. You can convert it too.
My magnavox dvd player will not play DVDs but it will play cds and it makes noises when I put a movie in the dvd player like there's something in the dvd player but there's nothing in there what do I do oh here is my magnavox model DP100MW8
wow smart man mine is coming up error disc everyone I try .and even my Lazer cleaner won't play!!! I cleaned the tray! and my disc are new so maybe it's the vcr player but I'm gong to try this before I buy another one ..thank u!!!! good tips!!
Hi all i have a toshiba cd player when place cd to play system read as no disc and tried to insert usb drive system still read as no can any one please help me to solve this problem
The time required to get the casing off and manually clean, a cleaning disc would be sufficient. What can you do a cleaning disc cannot? That's what their designed for (if you have one laying around that is...) Other issues could just be a bad disc... No amount of cleaning would fix that. It surprises me the number of UA-cam video fails to miss this rather obvious point. There are some dvd's that just are bad..... Believe it, or not, you do get dud's. Les likely with retail discs, but it can happen there too. But, we all like tinkering, so i guess we're all excused..
@@AKSHAYBHOPANI Think you got that backwards.. CD cleaners are designed to clean the sensor, they have brushes on the disc for that the rails are or either side of the drive where the disc sits. but ya np
+TIRUMANI NADAR The Problem might be in circuit board because your laser is actually working but blinking and rotor is not spinning. There is also chance of motor to be faulty.
+Danish Bhatti That may be because of power supply issue. You need to replace the power supply section. Visit nearby service centre to get install a new one :)
Purane DVD me Pen drive nahi chalega uske liya naya dvd lena padega with USB port. Tum purne dvd me naya motherboard daal sakte ho but uska cost naya lena jitna hoga.
i had a diffrence dvd player he says also no disk. it was a defective capacitor on the mainboard of the player, he was bugled, a 470uf 16v capacitors i replaced the capacitor for a new one and it works.
Out of curiousity, what model was it? I am working on an RCA DRC8335 right now with the same issue. The secondary of the PSU is brimming with those, and I replaced with a higher value voltage rating. I haven't gotten to the DVD board yet(after I got it to turn on at all by fixing PSU, I got a no disk error from the DVD.) In addition, the VCR transport doesn't respond at all, and if I spam the eject button, the front panel dims, and then turns off and the unit resets! This spurred me to go ahead and build a curve tracer for this repair, since I can't even find a schematic anywhere. I am not sure what voltages need to be present on this particular model...so the only way forward is to actually test all components to be within operating specs.
+best songs lyrics and video Vo wire track karo kidar ja Raha hai motherboard par. Vaha likha hoga konsa colour ka port hai. Agar headphone ya Aux cable hai toh white wala will be ground/negative (outer covering) and Red will be positive (internal socket).
Backup your DVD collections with WinX DVD Ripper: bit.ly/34r1g81
(Sponsored by Digiarty Software)
Convert/Save Disc (CD/DVD/VCD) Files To Media Files (MP3/MP4) - Back Up Your Memories -
ua-cam.com/video/llJnjogK768/v-deo.html
AKSHAY BHOPANI mine keeps saying insert disc
AKSHAY BHOPANI hlo. 9797481328
Sar mujhe phone karna 9797481328
What a stupid video he shows.... Only he knows it all
Worked like magic....i almost got a new home theater out of ignorance...tnx boss...u just saved me money👍🏽
Awesome
Many thanks, Akshay -- this worked for me. Somehow, seeing the inside of a machine before you open it up in real life helps enormously.
Thank you so much! Your series is a lifesaver. It certainly beats spending $120 to replace my multi-region DVD player. Bright Blessings to you & yours!
+Lioness DeWinter Thanks. It means us a lot. Also check out our new videos with improved audio and video quality. Hope you like it.
Lioness DeWinter Where can you buy multi region DVD players?
Did work ! You are awesome. Don’t worry about negative feedbacks...ask them if they made any awesome videos like you...
Thanks a lot 😇
my DVD player was broke like this for 2 days and it was as simple as cleaning the disk tray. this was very helpful
+EmeraldKnight Thanks. Also check out our new videos with improved voice and video quality.
AKSHAY BHOPANI will do
AKSHAY BHOPANI I subscribed just after watching this video
Thanks man
I just tried the same procedure on a philips blu ray. Worked like a charm. I do think however that the sled (on which the lens head moves) had accumulated some dried up dust and that was the real issue in my case. Many thanks
affe humbug Awesome!!!
You did it! You fixed my DVD player! Thank you for your easy instructions! 👌🏻
Nicely done, but I have one suggestion. Before calling customer service or anything like that, check the board for corrosion or if any of the connectors are loose
This worked for me! Yay!!! And to think my bluray player had been sitting aside for months. THANK YOU! 😁
+Free Leaf Cool!!..... Your welcome.... Stay tuned with The Tech Show community :)
Wow thanks! Worked for me. Now I can watch my movies again 😊
thank you my dvd is now fixed so i can watch a movie!!! 🤗🙏🏻
Enjoy
its the center disc hub the felt get's worn down and "slippery", either take the drive aprt or add using a Q-Tip rubbing achohol to center of dvd and insert it fast
Cleaning the lens doesn't work all the time, you need to slightly increase the voltage to the lens from the pot/s on the circuit board. And 10 min to remove some screws? Really??
At first I thought your method didn't work because each time I closed the drawer it would open back up but then I hit the power button to turn it off because it closes the drawer and it stays closed. Then when I turned it back on with the play button it started working immediately. Thanks a lot for your help.
Dear Akshay,
Good tutorial.But why u keep using chisel head screw driver for cross head screws ?
+martinJtan Thank you so much actually I have chisel one only so I used that.
Jesus Christ man you don't know the name of the tool he's using or the screws. If i was a moron i would not comment.
Doesn't matter what screw driver he used, it worked didn't it. I used a damn pocket knife lol. Does it really matter what he uses lol. Ppl will complain and critique anything.
Hi Akshay, I have a question. My Toshiba DVR630KC model VCR/DVD player will not load a disc. I took it apart and cleaned the lens and it still won't load. Any advice on how to fix this problem? Thanks Michael Newell from Niagara Falls, Ontario, Canada
Hello Michael, If cleaning not solving the problem means lens is damaged. Need to get it replaced from Toshiba ASC.
Thank you for this helpful video which has enabled me to resolve the "no disc" problem.
+Steppy That's great !!
You're the BEST :D Last night I prepared my DVD player :D
+Raymond Lichtenstein Thanks a lot... Also have a look at our new videos, hope you like and find it useful :)
Very well explained and demonstrated. Thanks so much sir!
Glad, it was helpful sir.
omg thank you. this problem was driving me crazy!!!!
+Out Law Your welcome. Stay tuned with The Tech Show :)
you are a piece of art aren't you? put it in the maintenance shop
+Henry Sedillo Haha !!!!
Lol have a great weekend fam..... Peace
+Henry Sedillo Thanks. Have a great week ahead :)
I gave you like before I tryed this simply because I think you are entertaining to watch.
Haha thanks 😂
Does this include portable DVD players too?
Yes, it will work. But disassembly might be a complete disaster and risky.
It worked! Thank-you so much! Thought I was going to have to buy a new DVD player.
+raymondj88 Awesome
I cleaned the lens Still getting error, took my DVD to repair guy he blew some air in the lens and it's working now, your video didn't help me.
+Mukesh The same thing he did with the blower more precisely. No worries, your dvd started working that's good.
There was no need for the comment.
I have to ask something , should the lens touch the cd while scanning it
No it should not touch. The light falls on the disc and reflects to read data.
@@AKSHAYBHOPANI on mine no lights are coming
Lights are infrared. Not visible to the human eye.
This worked for me! Thanks so much for sharing!
Akshay!! So cleaning off the lense has now got my DVD player to accept the disc. It no longer says "no disc" and the time comes up on the front of the DVD player BUT now when I hit play it immediately stops and won't play the DVD still.. Any suggestions?
Check if something is blocking the laser way. Or a laser might be damaged. Need to change cd assembly.
I believe you might be right! Doesn't look like anything blocking it but may just be damaged altogether! Thank you so much for this video and for your continued help!! Although I couldn't fix this one I was able to fix another one with the help of your video! Thanks again!!!
Does this work with portable DVD players?
Might do the trick as a portable lens is always exposed to dust.
thank you akshay .... my prob settle already with your help ... may i share your video to my fb wall .. this video was great
+badrul hakim adzizan Thanks a lot.... Do check out our latest videos.... Definitely you would like it :)
OH MY GOSH! Thank you so much, I really appreciate it! IT REALLY REALLY WORKS!
+CraftingFlick Thanks buddy :) 😊 😇 🙏
tried that, didnt work!....Any other suggestions?....I keep getting bad disc error.
+Kelly Roberts The reason would be that your laser may be faulty. So try replacing it :)
+Kelly Roberts The reason would be that your laser may be faulty. So try replacing it :)
I think its an IR laser, so your cell phone can visually see it. If this is the problem is it easy to check. Just turn on your digital camera, and point it at the laser(not directly!) if you can see it, it is on. If the surface is smooth, you're good to go.
I was hoping for a really in-depth characteristic video where it shows common fail points, and also what everything should look like under electrical test. Instead it was standard tier 1 tech support. I think most people who end up on here have already tried the CD cleaner/is it plugged in options...
Your instuctional video worked for me! I was about to junk my dvd player and buy another, but now it's playing the very dvd it stopped playing when i first noticed the problem! Thanks much and God bless...
Thank you for your time and expertise.
How long is the laser last?
3 to 5 years depends on quality.
first time you hold a screwdriver on your hand??? wtf?!?!?
My same player's disc makes a noise when it spins then says "No Disc". What can be the cause? Please answer here...
There would be some foreign object inside disc tray, try to open or take it to service.
@@AKSHAYBHOPANI it's not that my friend, it's just not reading the discs. I have another dvd player and it plays the same disc/s perfectly.
@@Craigs_Veritas_Bullet1n Then you need to get the IR Sensor/Laser replaced.
+AKSHAY BHOPANI Have any fix-its for a Philips DVD player that keeps showing Root on the display panel?
+Barb Lambert I think there is issue with the motherboard a.k.a system board. Try to take to service expert and let them track and solve the issue.
AKSHAY BHOPANI hsjcbe
recap that thing! watch a few videos on recapping boards and you'll be able to fix 80% of the failed electronics out there.
this was so informative and clear! thank you
just tried it and it WORKED!
That's Awesome !!!
CD spins in anti-clockwise direction. Any suggestion what to do?
That doesn't matters. It's not able to read. Try other cds. Might be laser diode damaged. Take it to service center and get it replaced.
AKSHAY BHOPANI I figured it out that my VCD player uses KSS-213C laser diode so I ordered one lets see if it fixes the issue.
AKSHAY BHOPANI hey I need one more help.
@@JSVisualOdyssey Cool. Let me know if It works.
@@JSVisualOdyssey Sure. Say Na. Also I hope you carefully solder the SMD diode. Probably it will be SMD which is difficult to mount.
Many handle the actual discs like trash. If the disc has fingerprints and/or scratches, it's not usually the laser's lens that needs cleaning.
Haha true. It's other way around 🤣😂
Most of the time is spent on the screws! Dude, unscrew it before the actual video starts!
Sure. Regret for the inconvenience. Appreciate your feedback. Thank you.
I have to tilt my dvd player for the laser to read, and then i can play, but if i take out the cd and put it back again, it said no disc.. Any idea?
Probably Laser Diode Damaged
Dear sir,
My DVD has a specific issue i.e it play all audio discs but don't play video discs from original manufacturing company. Like YRF, SONY BMG etc. It shows up 'no disc' do you have any solution?
Was it working earlier ?
You can use diagonal cutters to get a spin on those stripped screw heads that he had difficulty with.
+Thomas McLaurin Yes sure. Thanks man
Sir ye video dekhkr mera cd plyr to theek ho gya lekin usme ab video ki cd nhi chl rhi.sirf audio ki chl rhi hai.....plzzz help sir..
Try another video CD. Or use Philips Lens's Cleaner. If still doesn't work then there will be some problem in decoding circuit or Lens itself. Take it to service.
Thnx sir👌
I put the disch on tray then closed then the CD rotate for two times then it stops followed by showing "no disc"
Follow the same steps and hopefully, it will be fixed.
Philips dvd player
Model:-dvp3608/94
Problem:- Showing no disc on display
Please tell what's the problem
Try to clean the disc tray and laser carefully like this In the video. For most people, this works. If it didn't work then you need to visit a technician and replace the tray assembly.
Worked like a charm! Thanks man
Why not use a disc cleaner disc that's designed to clean the lens? You are taking a chance of damaging the lens buy your procedure.
+Larry Osterkamp Yes I tried Philips Lens Cleaner CD but even that stops within few seconds because lens is not able to read anything.
Larry Osterkamp, a lot of those DVD cleaners don't work. It depends on the environment where the DVD player is at. If you are working on a DVD player where the owner smokes, the commercial DVD cleaners won't help.
And yet another person finding something irrelevant to complain about. He fixed it. And didn't damage it.........
Hi, my Cambridge blue ray universal player shows NO DISC,. what should be the cost to change motor?? Thanks and regards
It can be around 800Rs to 1200 for the caddy includes the whole assembly. Check-in nearby service center.
@@AKSHAYBHOPANI thank you very much. Will you also be able to do this??
Nope. Contact nearby electronics store or technician to fix it.
@@AKSHAYBHOPANI thank you 😊
Bro I have cleaned...but not working...what should i do
Your laser diode may be damaged. Get it replaced by the service center.
Next tutorial; "How to remove a screw"
and the one after that; "How to press pause on your recorder while you spend 10 minutes removing screws"
Sorry for the jokes, it was just too good to pass up. In all seriousness, it was a helpful video, thank you.
+Johnny Skuzbucket Hahaha.... Agreed. Sorry that video was very old and I don't know how to skip part of video in editor.
+Johnny Skuzbucket Your Welcome buddy. Check for our new videos hope you will like it. Thanks and stay tuned with The Tech Show community.
lol
This is the best.i tried it once and it's working.youre the best!
I have a 3d DVD player and won't read disc or open or close what should I do ?
Check if it is belt driven, and the belts are intact, troubleshoot the power supply.
cleaning the lens worked for me. thank you for sharing your knowledge.
+Mj Sian Your welcome. Do check out our new videos....Hope you like it :)
Never touch the play surface of a disc!
Yes noted. Thanks mate :)
Yeah when you touch it you get a murder charge you moron.
I can play all my old dvds but not new ones, what is up with that?
Maybe your unit is VCD Player and new ones are DVD ?
My pioneer DVD player disc insert but not reading what is problems
It happens mostly because of dust accumulated on the laser. Try cleaning it as shown in this video. Many people reported it worked.
Can you get its inside that thin with screen and a light like part
Probably it will be damaged if we get inside machine assembled parts.
My DVD player keeps loading and not playing what is that problem
Try some other CD. The disc may be damaged.
I cleaned the laser lens but noticed a couple of capacitors that are showing some damage so I suppose they'll be my next project.
Haha yes. Replace them all !!
I already follow your tips but mine is different when I put old cd's it worked but on new once it keep on saying no disk .
what to do?
Your CD player might be VCD Player. So old Cd's worked but new DVD's won't work. This has nothing to do with troubleshooting.
Mine too is a Philips DVD Player but same error mentioned above, normal CD is working but dvd is not working
Beautyfully presented.This effectively worked for me.
hi sir my DVD only supported 3gp what can I do pllzzzz replyy
+SK Channel MPEJ 2 will also work. Only MP4 and WAV doesn't works in old DVD Players.
AKSHAY BHOPANI but my DVD is new
+SK Channel So you can put HD movies/ videos and play it directly at full hd. Some DVD players still doesn't supports MP4. You need MPEG 2 or AVI video file. You can convert it too.
Lg dvd player shows loading i opened it but dvd not running but says loading
And at last it says disc error
It seems the Laser diode is unable to read the disc. Get the CD assembly replaced from LG Service Centre.
My magnavox dvd player will not play DVDs but it will play cds and it makes noises when I put a movie in the dvd player like there's something in the dvd player but there's nothing in there what do I do oh here is my magnavox model DP100MW8
Laser Lens issue. Get it replaced.
A big thank you for making this video.
+Robert Mattison Your welcome...I love such great response from my community.... Thanks a lot..... Stay tuned with The Tech Show community.
This video saved me some money 😊😀👍👍
That's awesome.
Help what else could I use to unscrew the dvd
You need star philips screw driver. Even i did it with wrong screw driver so took time.
@@AKSHAYBHOPANI thank you still didnt work but bought a new one I'll definitely use this ifit happens again though ☺️
My DVD player cD kepting afterwards cd coming out nor running
This means either the CD is damaged or something is coming between the tray and laser. Try to clean with this method or contact customer service.
Decide very best thank you bro thank you so much bro so so so much 🙏🙌❤️❤️❤️❤️
Dude you just saved me some money thanks so much thanks thanks thanks
Thank you very much for your guidance. well done
Glad, it was helpful
Akshay u need a four side screw driver not a two side flat one. Your using a tester to open the DVD.
Oh yeah well spotted. Thanks for feedback. Appreciate that.
wow smart man mine is coming up error disc everyone I try .and even my Lazer cleaner won't play!!! I cleaned the tray! and my disc are new so maybe it's the vcr player but I'm gong to try this before I buy another one ..thank u!!!! good tips!!
Hi all i have a toshiba cd player when place cd to play system read as no disc and tried to insert usb drive system still read as no can any one please help me to solve this problem
I have had 2 LG blu rays do this to me in the last month. I'm gonna try this and see if it works.
I just fixed both players. Thanks !!!!!
+greenbile Sure let us know if this trick works for blue ray DVD players.
+greenbile Awesome. Check our new videos with improved video and voice quality. Hope you like it.
It works
Working bro thank you very much🙏🏻
Enjoy
How I will share u
Many thanks😊This worked for me😁
Glad, it was helpful.
The time required to get the casing off and manually clean, a cleaning disc would be sufficient. What can you do a cleaning disc cannot? That's what their designed for (if you have one laying around that is...) Other issues could just be a bad disc... No amount of cleaning would fix that. It surprises me the number of UA-cam video fails to miss this rather obvious point.
There are some dvd's that just are bad..... Believe it, or not, you do get dud's. Les likely with retail discs, but it can happen there too. But, we all like tinkering, so i guess we're all excused..
I tried the cleaning discs but no luck, it only cleans the cd rails not the sensor. Thanks for the feedback, will definitely improve.
@@AKSHAYBHOPANI Think you got that backwards.. CD cleaners are designed to clean the sensor, they have brushes on the disc for that the rails are or either side of the drive where the disc sits. but ya np
I'm already checked ass it is for your video. but my DVD IS NOT WORKING
please reply
+vamshi madoori Your laser may be damaged so you need to take it to service or get a new one.
+vamshi madoori What error you get ?
NO DISC
+vamshi madoori Try using different disc. If it doesn't work then you have to change the laser.
Put your PALM on top stand up and apply some leverage.
First, clean all the fingerprints off the disc (troubleshooter: do not touch the disk data side with hands/fingers).
Can I put USB port
Nope bro. We need to change the main circuit a.k.a motherboard to support USB. It's better to buy a new one because the cost will be almost similar.
LASER IS GETTING ON AND OFF THEREFORE IT IS NOT SPINNING WHAT IS THE SOLUTION PLS REPLY ITTTTTTTTTTTT
+TIRUMANI NADAR The Problem might be in circuit board because your laser is actually working but blinking and rotor is not spinning. There is also chance of motor to be faulty.
THANX FOR REPLY
+TIRUMANI NADAR Anytime brother
A 5 volt dc motor rotating the disc...may be motor fault or 5volt power failure or mother board complaint
sir my dvd is not runing it gives eror overload and off
+Danish Bhatti That may be because of power supply issue. You need to replace the power supply section. Visit nearby service centre to get install a new one :)
Mera normal LG DVD player hai mujhe Pendrive cannot ho sake aisa koi idea batao please hindi me sir
Purane DVD me Pen drive nahi chalega uske liya naya dvd lena padega with USB port. Tum purne dvd me naya motherboard daal sakte ho but uska cost naya lena jitna hoga.
holy creado it worked!
+Christina Johnson Awesome. Check out our new videos with improved audio and video quality. Hope you like it :)
How much
Approx 1K to 1.5K
I did that and it didn’t work
end of the vdo is fake....he didnt show putting cd in dvd player....i think he show any channel
Lol bro. Be positive before you try anything. Check comments it works for most people. I played shemaroo Cd "Abra ka Dabra" at the end.
@@AKSHAYBHOPANI no one can trust that's why I commented...sorry bto
@@infinitevlogger2242 aree why sorry bro. Chill. Comments are there so that you can share your open views so appreciate your feedback.
hey Apu I know how to clean the laser eye in the DVD player. You DVD might be scratched. Throw it away. Not the player.
LOL
i had a diffrence dvd player he says also no disk. it was a defective capacitor on the mainboard of the player, he was bugled, a 470uf 16v capacitors i replaced the capacitor for a new one and it works.
+stefan boonstra That's Awesome !!!
Out of curiousity, what model was it? I am working on an RCA DRC8335 right now with the same issue. The secondary of the PSU is brimming with those, and I replaced with a higher value voltage rating. I haven't gotten to the DVD board yet(after I got it to turn on at all by fixing PSU, I got a no disk error from the DVD.) In addition, the VCR transport doesn't respond at all, and if I spam the eject button, the front panel dims, and then turns off and the unit resets! This spurred me to go ahead and build a curve tracer for this repair, since I can't even find a schematic anywhere. I am not sure what voltages need to be present on this particular model...so the only way forward is to actually test all components to be within operating specs.
it was how to clean you didn't show how to fix if that is still the problem
Cleaning the lens in most cases solves the problem.
He finally get the cover off at 3:20.
Yes 😂🙈
Sir mere DVD ka audio socket ke tar toth gaye ha kaise pata karu ki konse tar ha audio socket ke
+best songs lyrics and video Vo wire track karo kidar ja Raha hai motherboard par. Vaha likha hoga konsa colour ka port hai. Agar headphone ya Aux cable hai toh white wala will be ground/negative (outer covering) and Red will be positive (internal socket).