Good day. i also did this when I observed that for 2 days my decoder continued to display E48-32 no signal found. But till present I am unable to use it because it will scan for some time and stop and say that signal was not found. Please what is the issue. Although since inception my antenna was at the top of my parlour. Could this be an issue now?
Pls Channel 2 and 25 is saying invalid channel error, i took it back to the store and they did it for me and it still did the same thing when i took it home. I was told to reset it by a friend pls will it be normal if i reset?
That’s signal issue. Your decoder is not seeing any signal. Kindly watch the video for searching for signal and implement the steps. Provide feedback when you are done
After resetting my old gotv decoder( it was showing searching for signal) it started asking for first time installation after which it will show 'no service found' what do I do?
After scanning, mine is still showing no service found and any time I press exist, it continues to scan again and again and still showing no service found. I'm tired.
Please I did these and my signal strength and quality won't read again therefore no tv channel and radio channel popped up... Pls help.. I don't know what to do
If it’s E37-32 please watch the video I uploaded before this video and then after doing the upgrade. Watch this video and run a default reset. Trust me the decoder would bounce back. Keep me updated. Once more. Sincere apologies for the inconvenience
After scanning my decoder is still showing no signal, what should i do next?
Good day. i also did this when I observed that for 2 days my decoder continued to display E48-32 no signal found. But till present I am unable to use it because it will scan for some time and stop and say that signal was not found. Please what is the issue. Although since inception my antenna was at the top of my parlour. Could this be an issue now?
Me right now
I did àll you said but no services found displayed what do I do.
I did all that but saying no channels found. Will try to remove things at the back of the decoder 😢
I have gone through the whole process but after scanning it will show no service found press ok to exit please what should I do
Please same tome
After I reset no device was found and I have done all said dt i should do please help me sir I'm really worried i don't know what else to do
I accidentally locked my pin code on Gotv but have already recharge my Gotv. Pls can I get help to operate my Gotv
Yours here is showing channel number under where channels and radio is but my is 0 a d the radio also 0
Have this issue been resolved?
Pls Channel 2 and 25 is saying invalid channel error, i took it back to the store and they did it for me and it still did the same thing when i took it home. I was told to reset it by a friend pls will it be normal if i reset?
After I reset . No service was found
What about if it's showing no service found
Please, how can I reset my gotv.
I have followed the due process but it's still saying no channels found...
That’s signal issue. Your decoder is not seeing any signal. Kindly watch the video for searching for signal and implement the steps. Provide feedback when you are done
What should I do please
After scanning it did sheet i tried to pay money and see but it has refused ,every time i try to pay it is like account closed,what should l do please
Do U lose your subscription after rest ? And if I want to use Nigeria decorder do I set the country as Ghana or Nigeria
Actually my Gotv is decoder is not working well this is the problem it not showing the actual date ND the is not showing
After resetting my old gotv decoder, it was showing search for signal again it will show no channel found .
Pls where it shows language I mistakely change from English ... To France..pls how do I change back to English...
What of decoder that has been used some years and I want to start using it, please what can I do?
Please no channel is picking on my gotv, all the respond is invalid channel number. Please how do I solve it.
What should l do if i try to pay using my phone but they say account closed
My own has been scanning since morning and refuse to show anything.
It keeps repeating scanning
Visit the closest office to you
Mine is still saying no divice found please help a sister it's almost a week dt i subscribe i haven't watched any thing on it
I have gone through the whole process and it says no station found
I paid but my gotv is not working
Good day pls mine says this channel has not been enabled, wat does it mean.
I mean all channels except from 1
My gotv decode can not load finish, e just stop at 40, what we I do
You mean it does not scan all channels?
My Gotv have been showing me no signal for three days now
After resetting my old gotv decoder( it was showing searching for signal) it started asking for first time installation after which it will show 'no service found' what do I do?
If I reset my gotv decoder and display and some of the Chanel are not chowing what I am going to do
Thanks so much 😢it helps me just niw
If I press p+ it will show me one p- it will show me zero hw should I do it
Yes press P- three times and three 000 will show and then press P+ once and 1 will appear. You will have 0001. Allow to download
Please can u help me my decorder refuse to show it been scanning.please
Dp you know how to check the signal?
I paid and my gotv is not showing what should I do
Good TV is only Sunday one that is showing please can you help me and reset it
I don’t get what you mean by only Sunday own
After scanning, mine is still showing no service found and any time I press exist, it continues to scan again and again and still showing no service found. I'm tired.
Look for a video where I talked about search for signal error
My decoder is subscribed but it doesn't show anything
Its blank,its only audio
After the process it is still showing no service found despite the strength and quality on 100%
Can you confirm if your neighbors are having pictures, which area do you stay?
Mine after scanning days "no channels found" and the channels that disappeared aren't restored still.
Check the video I did on how to scan for missing stations
If issue persist, chat me on whatsapp
@@neestynedigitals4344 hello
After pressing the resting button the decorder turn on and off by itself old decorder
Thank you this really help me 🙏🏻
Min is saying no service found
I have suscribed my GOTV but yet there are saying my Packages have been suspended or blocked . I need help
I have done it but isn't still showing
Aftr resetting, there no signal.. how will i solve this
I highly appreciated your help.Tis awesome.See you.
Mine is showing no service found
Thank you so much 🥰.. it's helps me 😁❤❤
Someone should help help me please
This Antenna wire cut
Since then my gotv haven’t been show and I just subscribe it
Please someone should help out
Mine is showing E161-0 and it's not streaming any channel
Chat us up on WhatsApp please
Mine didn't work😥
Please I did these and my signal strength and quality won't read again therefore no tv channel and radio channel popped up... Pls help.. I don't know what to do
Have you fixed it??
You are not having signal??? The complaint you dropped is not clear
I have recharged since yesterday but isn't showing
Send your Iuc no on our Whatsap will access the account and confirm what’s the issue
Hello is still not showing
Thanks I have done it is now working
How can I do it without remote
Please my remote is not even working with the decoder, even after changing the battery
Have you tested the remote with another box to be sure the remote is fine
Thanks so much. It has worked
My govt decoder is not responding to my remote
Please help
Mine didn’t work
It is resetting
What about those channels that are not showing
If some channels are not showing on your decoder, which package did you pay for and what is the error message on your screen?
@@neestynedigitals4344 My decoder is on GOTV max
Its a new decoder I bought it last year December
The major channel that does not show is AM Yoruba
Sincere apologies, just as I stated earlier what error message do you have when you switch it on.
If it’s E37-32 please watch the video I uploaded before this video and then after doing the upgrade. Watch this video and run a default reset. Trust me the decoder would bounce back. Keep me updated. Once more. Sincere apologies for the inconvenience
@@neestynedigitals4344 ok I will try it now
Thank you
Please how do I rectify this ?
Chat us up on whatsapp
It works guys😊
Thanks soo much
Glad to help
After ressetting no services are now found
Send a message on WhatsApp
Your number kindly
@@neestynedigitals4344 hello
@@hrmoyebodeakintunjiismail2264 hello
Wats your WhatsApp
I have scan severally
What’s the challenge exactly?
You press menu and not help thank you
Thanks. It worked
Thank you sir
Glad to help
Hello sir are you use telegram app
Yes it’s very active sir
Sir tell me your telegram channel name
t.me/Dstv_NG
Click on the link to join automatically
@@neestynedigitals4344 hi
Thanks allot
Good morning
thank you
Yu help a lot thank Yu very much
⁸
My recorder keeps showing "Boot in progress please wait.......why????
Mine still refuse to scan what will I do now after pressing reset
When I reset it , it showed no channel found and it can go back to the main menu . What should I do pls.
Good morning but I ve been doing it on my own it's not working or showing anything so what do I do😢😢😢
After doing so its still showing no channels
Mine is showing E161-0 and it's not streaming any channel
Please chat us up on whatsapp
@@neestynedigitals4344 send the number
I mistakenly selected first time installation on my Gotv decoder, it is not working, what do I do