How to Straighten Wire for Beginners : Jewelry Technique Tutorial
Вставка
- Опубліковано 19 сер 2024
- Learn some tips and tricks on straightening bent or kinked wire with this beginner-friendly mini tutorial.
Jewelry polishing cloth: amzn.to/2PQwcIh
Don't forget to subscribe for more jewelry tutorials! Also please check out my shop at www.etsy.com/s...
and like my Facebook page to show support www.facebook.c...
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie freemusicarchiv...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) creativecommons...
“White” by Kevin Macleod
incompetech.com....
Licensed under Creative Commons Attribution 3.0 Unported license (CC BY 3.0) creativecommon...
No modifications made to music track: excerpt only.
Thank you so much for posting this Jocelyn! I just recently started making earrings, and would get so frustrated trying to straighten the wire. I ended up wasting a lot of wire because I could not get it straight. I tried using the nylon pliers, but still ended up with some kinks. Now I know a simple, but extremely effective way of fixing this problem!
Ignore negative people & carry on the wonderful job... You have made the videos easy & straightforward.....THANK YOU XX
'ignore any opinion that disagrees with your own' this is the absolute worst advice that you could give someone; though stalin would agree.
@@s.sradon9782 it said NEGATIVE PEOPLE, not negative opinions. Can't differentiate that, can you?
@@rhymedelacruz8552 negative people have negative opinions, I guess someone that needs step by step video instructions on straightening wire can't add up the dots.
@@s.sradon9782 there are subjective negative opinions, and there are objective ones. Never had your work given criticism by a professor or mentor? Were they always positive? Do you label your mentors NEGATIVE PEOPLE then, just because they have something negative to say about your work?
I guess someone who also needed step by step video instructions on straightening wires also doesn't have enough knowledge, nor maturity, for these experiences huh?
@@s.sradon9782 also what's wrong with needing step by step instructions on straightening wires? You can straighten a wire willy-nilly but not to the point that it looks brand new and kink-free. You see, not every single knowledge in this world is common sense to people, and needing these videos is called searching for easier and time saving ways that actually produces more effective results. 😉
Thank You Greatly! I have just a few 20 guage wires that are bended badly and I wanted to save them, this video absolutely saved them from the garbage!
Thanks so much I've just started working with wire .
That's a marvellous tip. I've been frustrated with wasting so much kinked wire whilst practising, I was even tempted to give up, but am persevering with it, so hopefully I may have a couple of decent pieces to show in the near future!! Thanks again.
I'm new in the jewelry making world and have wondered what would be the best way to straighten my wire. Awesome video! Very helpful! Thanks so much AND you have a new subscriber!! 💖💖💖
Straight to the point. Useful content and information, thks!
It was really helpful for me and today I started working
Exactly the information I needed! Thanks for this video, you make the technique look easy.
in a sense it is.
assuming that you have a 3d printer, basic carpentry tools, basic metaslworking tools or a knife and access to msoft pine i will be uploading the files of a basic tool to ww.thingiverse.com
the tool is a part of a larger automatic machine in the works and is very simple to build and significantly more effective and precise, with the (hopefully) type of precision that allows unsupervised and completely automated winding of multilayered inductors with less that 0.05mm of angular deformation. I like engineering.
Thank you, Jocelyn! Your videos are so well done and so helpful. I'm a newbie with wire techniques and you make everything crystal clear. Many thanks!
thank u sooo much... i was having trouble with this kind of thing!
I really love your work :D You inspired me to make jewelry by myself
That was so much easier than I expected!! Thank you so much!! Nothing works as well as this!!
I did not expect this to work so well thank you so very much!
This video helped me to fix the tiny wire in my ,13 mm rotring isograph. Thanks!
Awesome! :D
OMG - Thank you, thank you, thank you!!! 🙏🏻☺💖
Thank you! Never knew that til i found you!♥️♥️♥️
That's a very helpful tutorial , thank you Jocelyn.
Great video. Thank you so much. I am very new to working with wire and I love your videos. They are very easy to follow and they are easy to allow for creative interpretation. :)
Thanks so much!! Doesn’t require a crazy tool or anything.
That was very helpful. Thanks so much!
Thank you, thank you, thank you. I was pulling on it. This works great. Thank you so much!
You just saved me $10!!! Thankyou
literally god bless you 😩
this was amazingly helpful and worked perfectly! thank you for sharing!
So simple yet effective! You're the best!😆
Aw, thanks! :D
@@FantasiaElegance Hey there just wanted too ask you a couple questions, if you get this let me know thank you
Best tutorial 🖤🖤
I had all this wire I was going to throw out thanks to you I can reuse.
Great tip thanks 👍
nylon jaw is the magic for me thank you
Thank you so much cant wait to make your turorials❤❤❤
1 thank you, I needed this video! And 2 your thumbs are adorable lol
Thank you! Now my money on wire isn't wasted!
Excellent! :D
The technique was very helpful, but the jewlery was gorgeous!! Tfs, have a gr8 day!
Very helpful...thank you!!!
Very helpful!!!
One step better is when you start with round nose pliers bend half way around, and then using flush cutters cut off straight part ( 1/4 of your bend ) this make all the end of your wire round.
Excellent!
Thank you!
Thanks a lot. Very useful advice.
Thank you SO much
Thx
Thank youuu!!
If you want straight wire, clamp 1 side in a vice and on the other side hold it with pliers or similar tool and pull it fast.
Thanks!
Thanks for helping me ✌✌✌✌
thank you!
Super
THANK YOUUUU
Hi, did you ever make a video showing how to harden your wire? 2:06
Madam If you want yo make s perfect line wire like a stick absolutely straight then there is one method also.
I have just begun watching your videos and would love to try making some. My problem is the expense of really good wire. I want them to be good quality and wearable. Any suggestions? I looked on Rio Grande at the type you use.
***** Thank you!
can we use cloths
Where was the link to the cleaning cloth? I couldn't find it, but you said you would let us know at the end of the tutorial!
Hi Janet! It's in the info section below the video. Are you on a smartphone or computer? On computer, just click the "SHOW MORE" text right below the video. On smartphone, (make sure you're not in full screen) click the little gray triangle to the right of the video title, then scroll down.
Hi! your tutorials helped me a lot and your creations are so beautiful!
I have a little question. I started using artistic wire and now i want to try dead soft silver filled wire. Is dead soft silver filled harder than artistic wire?
Thanks and have a nice day! ^_^
I always seem to have to hold the wire tightly with my pliers so I usually scratch the wire, would getting nylon jaw pliers help or is there something else I could do?
***** General wire work is what I meant sorry. I will try the painters tape. Thanks a lot. Your tutorials are always very clear and helpful :)
Nice video.....Will this work with Full Hard wire. I have 22 gauge on order. Thanks.
Phil
Hi Phil! Thanks! It should work with hard wire; you'll just want to be careful not to overdo it with the straightening motion as it does work harden the wire slightly, so you may end up with something that's harder to work with than you want.
@@FantasiaElegance I may have to try the nylon tipped pliers as the other method only gets the Full Hard wire so straight, (there's still a curve from being coiled up so long) I guess because of the hardness. I did have marginal success with twisting the wire in a drill, but it was hit or miss and most times it was unsuccessful.
Kind of a drag as I really wanted to have straight wire for this scratch built HO scale bridge i had built. The floral wire I had used was too soft and bent out of shape too easily. Thanks.
Philip
the wire is just curved becuz of the circle packaging
Thank you I wish to give you a million dollars but I'm poor but thank you
Thank you, it means a lot!!
My physics experiment
Look at those thumbs though! Wow! Just wow!
so essentially this can be easily automated by feeding wire through a set of 2 V-slots, which is a passive mechanism when it can be incorporated into any mechanism where wire is already fed through a system which can spare some torque. as an engineer your technique is crude and very inefficient and the video fails to effectively convey the mechanical principal of angular deformation of wire and the reverse engineering of this principal to undo it, however all that i wanted to know was if one can straighten a length of wire without exertion of shear forces unto the wire, since a fellow comrade mentioned that only shear deformation of wire can reform it into a straight shape.
any dental students here ??
Um
i just came for my headphone wires.