Hello, I will be installing the 100” version in my basement, the walls are lower but i do have the 68” from top of ceiling to bottom of stand as seems to be required. This does mean that the stand will have to be very low profile like 10” off floor, do you think this will be an issue? thanks!
@@ghostlyrich I threw away my template… so idk how tall I could go with a table it’s been off ever since I bought it. Not as good as yours. I could find the right measurements if you know how many inches the top of the paper is from the top screw line, which is the line nearest to the top where it wants you to drill, I think. I could be wrong. But i just need the top of the paper measurements from the like nearest to the top of the paper. Or I could try this… how many inches away is the top of your screen from the top of the table. And how many inches away do you have to table from the wall where the screen is placed…
Great video. Hisense recommends 68 from ceiling to the top of the table. I have 66" will that be enough?
Great videos and instructions. A little worry about where to out those springs and stretching them out .
Just wear safety glasses and be careful. I’ve installed so many of them now I’m used to the slipping in entering my finger a little bit. Lol
@ghostlyrich lol. Will do.
Hello, I will be installing the 100” version in my basement, the walls are lower but i do have the 68” from top of ceiling to bottom of stand as seems to be required. This does mean that the stand will have to be very low profile like 10” off floor, do you think this will be an issue? thanks!
Is there room to move the screen left or right on the mount to center it ?
Yes just choose your stud gap and slide to.center as long as with in stud gap
Nice set up, what is the height of your unit, the height from the bottom and top of the screen from your unit?
Thanks
Sorry i did this for the client so i dont have the measurements
What stand did you use….this part is eluding me
WHat was the ceiling height?
How many inches up is the top of that paper template from the top screw hole line? Like 3 inches?
It’s marked on the template as I show I’m kind of confused by your question. The top line is on the template and so is the bottom line.
@@ghostlyrich I threw away my template… so idk how tall I could go with a table it’s been off ever since I bought it. Not as good as yours.
I could find the right measurements if you know how many inches the top of the paper is from the top screw line, which is the line nearest to the top where it wants you to drill, I think. I could be wrong.
But i just need the top of the paper measurements from the like nearest to the top of the paper.
Or I could try this… how many inches away is the top of your screen from the top of the table. And how many inches away do you have to table from the wall where the screen is placed…
Is there room to put led on frame ? Or do the Fran holders get in the way
I assembled my screen but don’t see any holes to slot into the wall mount
Can one person do this
Yes but when lifting it onto the wall i recomend to, can be ver awkward
Nice!
Hisense need to employ someone from Ikea. That's ridiculously fiddly!
seems difficult tbh
Shit!
06 29 2014 approximately 9am it's 24 hrs a day there's no off time, they're finished