Hi thanks for uploading this video. I have had same issue on my Passat B6, replaced the door wires but the airbag light is now on and it says on my code reader 01221 Crash Sensor Side Airbag Driver side (G179) Short with ground. I didn’t work on crush sensor nor did I dismantle it, I only replace the wires and soldered them back. I didn’t t work on airbags nor connector under seat either. Do you know what it might be from your experience. Thanks
@@scottjames5413 yes, wires have been accidentally touching each other, hence the fault in the code. I dismantle the whole wire loom at the door and fixed those wires and connected them each other. Now it’s fine, it was just the wire, crash sensor is ok, other wires too.
@@scottjames5413 no problem, it wasn’t really difficult to find the fault, it was just difficult to work on such narrows and small-sized space area, but I have got eventually there. My wires had been in poor condition but maybe two therefore, I had to replace them all, but must have accidentally connected wrong wire. Upon having checked it properly it was fixed. I hope you have no issues.
Same problem with my golf 4 variant 2001, but the passanger side so in the right door i guess ? Ive ordered a new control module for it but this might solve it ?
Thank you! Fixed my problem with this instruction.
Thankyou, was exactly the spot.
Repaired, cleared code all ok
Very nice 👌❤️
Great success!
Great job...my car was on the exact location
Davaj na slovenskom neeee, bratkuuu :)
Hi thanks for uploading this video. I have had same issue on my Passat B6, replaced the door wires but the airbag light is now on and it says on my code reader 01221 Crash Sensor Side Airbag Driver side (G179) Short with ground. I didn’t work on crush sensor nor did I dismantle it, I only replace the wires and soldered them back. I didn’t t work on airbags nor connector under seat either. Do you know what it might be from your experience. Thanks
I have the Sam problem. Was able to fix it ?
@@scottjames5413 yes, wires have been accidentally touching each other, hence the fault in the code. I dismantle the whole wire loom at the door and fixed those wires and connected them each other. Now it’s fine, it was just the wire, crash sensor is ok, other wires too.
@@deninsrmic4165 amazing will have look see if mine is the same thank you
@@scottjames5413 no problem, it wasn’t really difficult to find the fault, it was just difficult to work on such narrows and small-sized space area, but I have got eventually there. My wires had been in poor condition but maybe two therefore, I had to replace them all, but must have accidentally connected wrong wire. Upon having checked it properly it was fixed. I hope you have no issues.
@@deninsrmic4165 thank you
IS THE CONNECTOR WIRE THE ONLY CAUSE OF AIRBAG LIGHT TO STAY ON?.
Класс
Same problem with my golf 4 variant 2001, but the passanger side so in the right door i guess ? Ive ordered a new control module for it but this might solve it ?
I have the G180 Error 01222 on a Golf 5. Do you know where is the sensor located? Passenger side
yes passenger side. in the door
@@golfwagen4173 Thank you
I have that truble code but i wires is ok :(
Nach 100 Meter Fahrt Leuchtet der Wider
That is a high mileage
This guy is clueless