Still loving your videos Matt, but I have to tell you my best friend (my granddaughter) is fascinated by your accent. She insist your name is Mit. 😂 She'll learn. 👍
Thanks Matt I'm watching all your videos , then I'm off to buy some kit. I'm thinking a Dremel 3000 with the burrs you recommended and a Dremel woodcarver set should do it. Looking forward to my first attempt 🤞
@@MattCarves Thank you Matt I will have a look at the 4000 ,the flex shaft makes sense I was going to get one so if in a kit probably make sense. Thanks
Hello from Auckland. What's the wood you're using here? I'm currently doing a wooden puppet making course and struggling trying to locate good carving wood. They use lime/linden/basswood. I might need to have a go at your little marionette some time.
Hi. I just discovered your channel. I really like your creations, too. Thanks for sharing and teaching. Can you please share what type of color dye/stain you use on the gnome's cap? Thanks, Matt.
Welcome to the channel 😊. That is spirit based wood dye from briwax. You can see the bottle in this video towards the end. ua-cam.com/video/H8aPkZMF1xM/v-deo.htmlsi=RAHFyGlWHQvqj5S_
Thanks. That whale and wave are spectacular! I guess the briwax dye is not sold here in the USA. I'm going to use Transtint dyes instead. They are alcohol based@@MattCarves
Hi. I just found a great deal at CraftSupplies USA. I got 7 1.8 oz bottles plus shipping for $29 U.S.. The dyes are premixed using alcohol. Great deal ending 8/ 828.
Have you considered testing your wood carving skills by carving the Eye of Agamotto from Marvel? It's a unique and intricate design that would showcase your talents. Some specific wood carving techniques you may find helpful for carving the Eye of Agamotto include: Relief carving: This is a technique where you carve away the background around a design to create a raised image. The Eye of Agamotto has a lot of relief carving, so this technique will be important. Chip carving: This is a technique where you use a small chisel or knife to remove small chips of wood to create a design. This technique could be useful for creating some of the smaller details in the Eye of Agamotto. Incised carving: This is a technique where you carve lines into the wood to create a design. You could use this technique to create some of the intricate details in the Eye of Agamotto. P.S I've always wanted to create a piece like this but I don't have the time nor the skill; only the knowledge
Cheers Luke, I'm not familiar with that eye of agamatto but just checked it out and it certainly looks like a challenge but an awesome on. Thanks and have a great day
Cool, I would say they are the T shaped burrs. Have a look in the description of this video. I list them also inverted cone shaped burrs are good to. They are pretty cheap too. ua-cam.com/video/lqh0l1aIi_g/v-deo.html
New to your channel. Love how you explain and the process. Thanks.
Cheers for the feedback. And thanks for watching 👍
Guess I'm gonna try that now lol. Another awesome video Matt 👍👍👍
Cheers Mark
Still loving your videos Matt, but I have to tell you my best friend (my granddaughter) is fascinated by your accent. She insist your name is Mit. 😂 She'll learn. 👍
Cheers Jim. From Mit Carves 👍
Nice video Matt. I firmly believe too in using the bandsaw as a helper in getting rid of some of the big stuff.
Yeah The bandsaw is awesome for that. Especially on harder woods.
These are so fun. I love it.
Thank you Linda, yes they are fun. 👍
Cool
Thanks Matt I'm watching all your videos , then I'm off to buy some kit. I'm thinking a Dremel 3000 with the burrs you recommended and a Dremel woodcarver set should do it. Looking forward to my first attempt 🤞
That's a lot of videos. I would recommend getting the dremel 4000 a kit with the flex shaft in it. If you can.
@@MattCarves Thank you Matt I will have a look at the 4000 ,the flex shaft makes sense I was going to get one so if in a kit probably make sense. Thanks
Hello. Is there a color or tint to the wax you used? If so, what? Thank you. I really enjoy your videos.
Yes, its liberon wax it comes in different shades that one is Georgian Mahogany, which is my favorite. Cheers for watching🙂
Hello from Auckland. What's the wood you're using here? I'm currently doing a wooden puppet making course and struggling trying to locate good carving wood. They use lime/linden/basswood. I might need to have a go at your little marionette some time.
That's macrocarpa. So pretty easy to get here in NZ. Yeah would be nice to have those carving woods here.
Hi. I just discovered your channel. I really like your creations, too. Thanks for sharing and teaching. Can you please share what type of color dye/stain you use on the gnome's cap? Thanks, Matt.
Welcome to the channel 😊. That is spirit based wood dye from briwax. You can see the bottle in this video towards the end. ua-cam.com/video/H8aPkZMF1xM/v-deo.htmlsi=RAHFyGlWHQvqj5S_
Thanks. That whale and wave are spectacular! I guess the briwax dye is not sold here in the USA. I'm going to use Transtint dyes instead. They are alcohol based@@MattCarves
Hi. I just found a great deal at CraftSupplies USA. I got 7 1.8 oz bottles plus shipping for $29 U.S.. The dyes are premixed using alcohol. Great deal ending 8/ 828.
❤
Have you considered testing your wood carving skills by carving the Eye of Agamotto from Marvel? It's a unique and intricate design that would showcase your talents.
Some specific wood carving techniques you may find helpful for carving the Eye of Agamotto include:
Relief carving: This is a technique where you carve away the background around a design to create a raised image. The Eye of Agamotto has a lot of relief carving, so this technique will be important.
Chip carving: This is a technique where you use a small chisel or knife to remove small chips of wood to create a design. This technique could be useful for creating some of the smaller details in the Eye of Agamotto.
Incised carving: This is a technique where you carve lines into the wood to create a design. You could use this technique to create some of the intricate details in the Eye of Agamotto.
P.S I've always wanted to create a piece like this but I don't have the time nor the skill; only the knowledge
Cheers Luke, I'm not familiar with that eye of agamatto but just checked it out and it certainly looks like a challenge but an awesome on. Thanks and have a great day
Question: what is the number for the flat bit you use?
Not sure which one you mean. Could you give me the time it appears in the video? Cheers
@@MattCarves you used it to carve eyes. It was in a short video. Your work is outstanding!
Cool, I would say they are the T shaped burrs. Have a look in the description of this video. I list them also inverted cone shaped burrs are good to. They are pretty cheap too. ua-cam.com/video/lqh0l1aIi_g/v-deo.html