Mines had been glitching for months driving me crazy I’m glad I saw this I’m going to try it hopefully it works really don’t want to have to buy a new radio 🤞🏽
It's glitching (ghost touching) because the glue is melting, and the screen is peeling away. It can cost anywhere from $100-1500 to fix. There are youtube videos on how to do very cheap but takes like 3 hrs. I literally did mine today because my was ghost touching for a few years. I funally had wno7gh
Bro, I daily drive a 300, and this just started happening a few days ago. It was annoying the s**t out of me because it kept switching my Bluetooth to the Aux setting. I tried this, and it's been working fine since. Appreciate this!
Yeah, my Uconnect did the same thing after a failed Sirius XM tuning. Next you know it had my car in the middle of the sea just like yours. Fixed it inside of five minutes. Thank you!
It's called ghost touching. It's because the screen is peeling off (the glue is melting) You can see it on yours. Happens in dodge,chrysler,jeep. There are youtube videos on how to fix cheap. Just do mine today
My 2017 Dodge Challenger GT was glitching and doing phantom pushing of buttons..it’s a factory defect called de-laminating screen and needs to be replaced especially when there is a crack looking like a wave in your screen..this was the situation for my car..thank you Bird for this advice it helped me a lot…Love you all Later
I have the exact same setup. With the vehicle running, I hold that top corner and nothing happens. I'm holding it for about 20 or 30 seconds at that. 2018 Jeep Grand Cherokee Limited with the 8.4 UConnect
I just changed mines recently it’s not as bad just a lot of glue. I used a fishing line to take the digitizer off its self with a blow dryer yk heat up the glue
You don’t have to change the digitizer I took my radio out the other day and cleaned it up good with alcohol and used 2 sided tape put it back together and the radio is working fine no more bubble or glitching
Man I’ll be trying this tomorrow if it works like everyone else says thank god i was already looking at replacing it because of the delamination but dealership stated 2017 charger scat was too old and no new head units were being made for it ….i was like really not even if I’ll pay
No way bro! This worked for me! I have tried literally every thing and nothing worked. I actually laughed when you said touch the corner of the screen. But it worked. This is wild! How did you figure that one out???
It worked but it was short lived, gonna change out digitizer. The digitizer came yesterday, so I’m gonna try that. Its visibly delaminating and my guess is (hopefully) that keeps causing the annoying glitches I wouldn’t mind but it’s just a random mess to the point I turn it off BUT the climate stuff and USB is glitching also because the screen is no longer working properly I think this will fix it? Fixing to find out later this morning.
The bubble is the adhesive separating it’s a tedious process to fix you can search UA-cam for DIY videos but if the bubble is what is causing your problem then it will proceed to cause issues I would recommend replacing your stereo . Sorry you’re having this issue.
Yes it’s just a system reset, mine was glitching because my hb put his iPhone on the screen. Mine has the bubble too but I haven’t had any issues with it yet
@parkerbird7774 my bubble is pressing buttons, messing with climate control and even called the police while driving down the highway. Ive had it turned off for months now
Mines had been glitching for months driving me crazy I’m glad I saw this I’m going to try it hopefully it works really don’t want to have to buy a new radio 🤞🏽
Did it work??
@@MrLoaded21Fr
.
It's glitching (ghost touching) because the glue is melting, and the screen is peeling away. It can cost anywhere from $100-1500 to fix. There are youtube videos on how to do very cheap but takes like 3 hrs. I literally did mine today because my was ghost touching for a few years. I funally had wno7gh
Bro, I daily drive a 300, and this just started happening a few days ago. It was annoying the s**t out of me because it kept switching my Bluetooth to the Aux setting. I tried this, and it's been working fine since. Appreciate this!
Where did you touch on the Chrysler 300 cause I’m having the same issue and the top right side isn’t working for me 😭
@@Phrenny try to push and hold the volume and menu button(the other big button) for 10-15 seconds it should work 👍
Is your screen peeling/bubbling? Tjats usually tye reason. Its a big issue with dodge,Chrysler. Look up on youtube.
@@parkerbird7774volume and menu button? Explain please
Yeah, my Uconnect did the same thing after a failed Sirius XM tuning. Next you know it had my car in the middle of the sea just like yours. Fixed it inside of five minutes. Thank you!
Thank youuuuuuuuuu!!!!! This has been driving me crazzzzyyyyy. And now it’s fixed!
Glad it helped
Right!
It's called ghost touching. It's because the screen is peeling off (the glue is melting) You can see it on yours. Happens in dodge,chrysler,jeep. There are youtube videos on how to fix cheap. Just do mine today
Whaaaat I was about to take it to the shop this worked thank you so much they probably would have charged me an arm and a leg!!! Thank youuu
You’re welcome !
My 2017 Dodge Challenger GT was glitching and doing phantom pushing of buttons..it’s a factory defect called de-laminating screen and needs to be replaced especially when there is a crack looking like a wave in your screen..this was the situation for my car..thank you Bird for this advice it helped me a lot…Love you all Later
You’re exactly right. Glad I could help
100 percent correct. I followed an easy youtube tutorial and finally did mine today. It's a process but only costs like $10-20 to do yourself
DUDE! Hell yes, it took trying twice but problem solved 👊
Thank you gang🤙 literally sweating balls cause my shiz keep turning my heat seat on and glitches every time I turn it off. This fixed it!!!💚💚💚
Glad it worked for you 💯
Bro!!! Thank you! I was about to punch a whole through my shit lol
Lmao glad I could help
I have the exact same setup. With the vehicle running, I hold that top corner and nothing happens. I'm holding it for about 20 or 30 seconds at that. 2018 Jeep Grand Cherokee Limited with the 8.4 UConnect
OMG IT WORKED THANK YOU
I didn’t have faith but it worked!! I did it while driving
It didn't last for me. The screen has a bubble causing the issues. I'm going to try to change my digitizer this weekend. Wish me luck!
How’d it go? I wanna do mine but I’m scared.
Yo how’d it go I’m scared too😭
I just changed mines recently it’s not as bad just a lot of glue. I used a fishing line to take the digitizer off its self with a blow dryer yk heat up the glue
You don’t have to change the digitizer I took my radio out the other day and cleaned it up good with alcohol and used 2 sided tape put it back together and the radio is working fine no more bubble or glitching
@@trick625thats what i was thinking did it work?
Thank you! Worked like a charm! 👍🏾
Glad it worked out
I have a 2019 Durango and it did not work... I held my finger on the same spot and nothing. But thank you.
Hold the volume and the opposite button of the volume (accessories button) for 10 seconds and release
ua-cam.com/users/shorts47xG9DQQjeU?si=KbKQS2kqZ5yrB4VT
Man I’ll be trying this tomorrow if it works like everyone else says thank god i was already looking at replacing it because of the delamination but dealership stated 2017 charger scat was too old and no new head units were being made for it ….i was like really not even if I’ll pay
This worked (for now) on my 2018 Jeep Compass . Mine has been glitching so bad for months. I hope this stays good! 🤞
Glad this helped you
I guess it's like a video game console. When it starts acting up, reset it.
No way bro! This worked for me! I have tried literally every thing and nothing worked. I actually laughed when you said touch the corner of the screen. But it worked. This is wild! How did you figure that one out???
It don’t work for me bc it keeps tapping the screen as I’m trying to reset it -.-
That's just a quick fix. The ultimate solution is too get a new screen protector.
Thanks for the upload, man! Life saver!
Cool thanks I’ll try it
Man you are a genius
Thanks, glad I could help
@@parkerbird7774shyt don’t do shyt
@@Freddy_Confetti yours is too far gone.. time to replace it buddy.
Mines not delaminating but it’s glitching… will this fix my issue ?
It’s like my uconnect has a mind of its own own
Did you fix it yet bro ?
2017 Charger sxt worked. Thanks
Awesome. No problem
Damn brother you saved me a trip to the dealership
Glad I could help 💯
This worked for my 2017 dodge charger SXT
Just like magic! 💯
Yessirr👍
Very helpful thanks so much
I have a 2018 and it is not working. What year is yours??
Omg it worked !
Thank you sr ,i just fix my u connect 👍
WOW thank you 🙏🏿
It worked but it was short lived, gonna change out digitizer.
The digitizer came yesterday, so I’m gonna try that.
Its visibly delaminating and my guess is (hopefully) that keeps causing the annoying glitches
I wouldn’t mind but it’s just a random mess to the point I turn it off
BUT the climate stuff and USB is glitching also because the screen is no longer working properly
I think this will fix it? Fixing to find out later this morning.
Did it work?
I literally just brought another tv yesterday 🤦🏽♂️ why didn’t I look this up
It’s the glue u need to replace the screen easy work
Will that reset also the bubble it looks like that sceean has it too...will that go away ?
The bubble is the adhesive separating it’s a tedious process to fix you can search UA-cam for DIY videos but if the bubble is what is causing your problem then it will proceed to cause issues I would recommend replacing your stereo . Sorry you’re having this issue.
Hi Parker bird💀
Screen delamination, you can see it in the video
Yep, if the reset doesn’t help then it’s time for a replacement screen
Thanks buddy
Happy to help
What generation is your UConnect 8.4?
I don’t know, I have a 2017 challenger tho
This did not work on my 2016 Shaker 🤔
That just restarts it? Doesnt fix the giant bubble causing the issue
Yes it’s just a system reset, mine was glitching because my hb put his iPhone on the screen. Mine has the bubble too but I haven’t had any issues with it yet
@parkerbird7774 my bubble is pressing buttons, messing with climate control and even called the police while driving down the highway. Ive had it turned off for months now
@@cheefreefer damn that sucks. Sorry to hear that. I know there’s videos on how to fix the bubble but you’re taking your whole dash out
Mine didn’t work I held it down forever idk what to do at this point
Make sure your finger is all the way in the corner
Didn't work for me either. Screen glitches while Im pressing the corner.
All you have to do is go to your trunk and look at your fuse box and take out fuse 37,38 and it should work
@@jorgebustos7527 thank u thank u!!! It worked for now, hopefully it stays that way!
@Jorge Bustos do I replace the fuse or just leave it out?
I’m trying tomorrow bro 🎉
Broooooo no wayyyyy it actually worked
Glad. Consider subscribing
Your screen is delaminating. You can see it in your video. Reset doesn't "fix" anything. You're just kicking the can down the road.
Yeah I know it’s delaminated but since this I haven’t had any issues 🤷♂️
Thx Bro 😊
yea nah this shi don’t work😹
You may have to try it a few times. If it still doesn’t work that means there’s too much separation in your screen (the bubble)
Bro I’ve only had my challenger for 6 months and it’s already doing this
Wish this would have worked for me😢
🙏 I hope this works! #notallheroeswearcapes
Does the car have to be in the run mode where the car isn’t all the way on or the fully started run mode?? And can you do it while moving?
You can do it with the vehicle running or in accessory/service mode
This worked on my 2017 Dodge Challenger RT after my car battery died.
Or get that bubbling screen replaced
I tried that and it’s still flickering crazy
No way this just worked haha my screen in my 300 has been buggin out nonstop
Glad it worked out
I see that fat ass bubble on the screen the digitizer needs to be replaced or the screen its self
mine has the same
You started the car right?
Yes
@@parkerbird7774 still not working. any other suggestions that you heard about? Thanks
@@CalmStormAmbiance-il4fv try holding the volume button and the channel changer button down for 15 seconds
@@parkerbird7774 I tried that but my Uconnect display screen turns off.
Bro my screen say update failed please insert usb device plz help 😢
I know ur name now
@@locodrew7467 yeah it’s my channel name weirdo…..steal my identity lmao
@@parkerbird7774 I now shall be known as... Bird.....Parker Bird
wtf bro thanks
No problem glad it worked.
Your tuch screen getting bad
Don't work
Password forget