Glad I could help, i have been preaching this for a long time. Not too many people believed me. I performed this option on about 50+ Chrysler and Dodge owners here in Dallas.
@@imagecartel1 out here dropping gems my guy💪🏿💯. I was looking at charger or Challenger for around 13k but all I see is a 300s. I getting one and supercharging it and needed this video .
Brother do you think this will work on a Durango rt 2014? I assume it works on charger/challenger/300 cause they make srt versions of them but not sure on the Durango since the tazer doesn’t have the same features on the Durango than the challengers/chargers etc
This method is great for the older models. I have a 2018 5.7 300 and I had to get the bypass wire to have it to connect with the software that he recommended. Also, the performance pages “changed” to have the SRT logo, but not the actual timing pages etc.
I have a 2011 Chrysler 300c and tried but no luck. Would I have to purchase the bypass cable? I used the odb cable he recommended and read it couldn't connect
Does enabling the SRT features in this way also enable the shortcuts the Tazer enables such as turning On/Off the ABS by pressing and holding 2 steering wheel buttons?
@SuperPhilthyrich Man it's been a year but could you elaborate on disabling the ABS by pressing and holding the steering wheel buttons? which buttons exactly do you hold?
@@ratijolbordi4255 this is what they say on page 11 of the Taser manual. Remember, it only works when the Taser unit is installed. Line Lock: when at a full stop and in Drive, press and hold the left arrow button on the left side of the steering wheel, and then press the Cruise button located on the right side of the steering wheel (the center button on the cruise control cluster). Note that you need to keep the left arrow button held down throughout this whole maneuver. Releasing the arrow button cancels the operation. Once the ABS light on the dash comes on and “Line Lock On” is displayed on the EVIC, pump the brake pedal twice firmly. You’ll know you’ve done the steps correctly when you take your foot off the brake - the car doesn’t move or roll forward. The ABS has your front tires locked up. Now, press the throttle and roast your back tires to your hearts content 😁 When you’ve taken your foot off the throttle and your tires have come to a stop, release the left arrow button to return to normal. If your car fails to return to normal for any reason, put your foot on the brake and put the shifter in Neutral. That should cancel everything out.
@@SuperPhilthyrichThanks a lot man I didnt see that u Mentioned the Tazer that enables that. I have the 2013 300c 3.6 awd. would u recommend the tazer? could it be useful on this model or would it be a waste of money?
I can say again. This will work for V8 Hemi models only, the v6 has a different ECU. I have enabled this on cars and Durango from 2013 and newer and every year worked 100% of the time. Did this over 200 times. If you have a 2012 or older I would say look through the comments to see if anyone had any luck. If the 2012 or older models had SRT screens I would say yes. However if you recall the older models did not have much of a screen on the dash and not much on the screen that moved to install DVDs. Good luck and send me a message if you need help.
I have 2013 Chrysler 300c 5.7 hemi. SRT mode not show current gear position. just 2 dashes. do I have to enable anything in The Multiecuscan software? also on home screen shows Sport/Track.
I have a 2013 awd hemi if I enabled the sport mode disabled eco mode and also enabled the set pages will it actually put the car in sport mode when I hit the sport mode button? Or is it just for show ?
@@Lakergang213if you click “traction control off its sports mode” but if you have this actived and your on srt pages it’ll shows sport on the bottom right and click it it’ll show you on the dash your in sports mode and it does have a lil more spice to it maybe juss an illusion doe 💀😂
Oh yeah he'll definitely know. He made those cars and he knows everything about specifically your car and all the models and everything that has everything to do with anything so I mean if you need to know how to spell a word or like a math equation also just shoot away He's got you
Did you change anything internal my b buddy afraid for me to do it since I have a 2011 300c like do you have any tunes? Or everything was stock when you did this
I swapped to a 300s v8 motor on my 2011 Chrysler 300c but still can’t get the sport mode only pages so I feel like I missed something during the swap but WhAt do anyway one have any ideas
I wonder if you could do this on a 2012 SRT8 Grand Cherokee? I have a 2012 SRT8 but I don't get those options on my screen I just get the lousy whatever screen comes with the rest of the Jeeps. I'm not quite sure when they introduced it into the Grand Cherokee lineup but I wonder if I can get that online. I don't know if it's got the connections already connected up or what the case might be but I would assume if they did it would already be on the screen.
Well I did this, it 100% it’s cool to have, but then after running my car 2 days my engine light came on.. errors U0002 and U0126 errors with the canbus module and the steering angle sensor, not sure if the performance pages messed with my car or if It’s just bad timing
@@Tx_Jay_ the check engine light went away the next day, no clue what happened, but it’s been a week or 2 now and haven’t had any issues, I still have all the SRT menus
You have to get a bypass wire that goes in your trunk. 2018 and above were added a supposedly security link to help prevent theft from the standard under the dash.
It all saves. Think of your car being in the factory. The engineer will log into the system and tell the computer that it is a 5.7 RT. The same computer is used on the SRT, so they log into the same computer and enable the SRT options.
I think you need to access through a remote OBD port like Tazer requires for 2018 and newer model...so buy the remote port from Tazer and it should then connect.
Wats up guys? I have. 2012 Chrysler 300c Luxury w/o Sport Mode. Looking to update to the SRT version for the uConnect.. Which plug and play is Available?(as I seen some saying the one you got is not available anymore) And would I be able to turn off the MDS like the Diablo13 does? Like I was pausing the video to see some of the other options you can do and there's a lot to explore on there. Wonder if you can update features to the FOB as well as well as not needing the LockPick so you can play movies or music videos while driving? Appreciate the input/feedback if y'all can help a 5.7L v8 Brotha out LMFAO 🤣🤣
I know Im late for the party. I downloaded the software and purchased the correct obd cable, but no luck. Any help would be greatly appreciated. Tried it on a 2011 Chrysler 300c
What happens if you enable sport mode on a 300 that doesn’t come with it from the factory? 🤔 I have a 300C AWD without sport mode. I’m just curious if there would be any changes if I were to force enable it.
the S version has more then just ECU differences then the C version, so even if you could, the only thing gained would be a change in shifting and throttle response.
@@TheWarriorsFromHell just wondering but what's VVT? Is that what makes sport mode have different throttle and gear timing? Which is Variable Vavle Timing?
@@imagecartel1 An upgraded chip? That's the difference between the 5.7 and the 6.4 SRT? lmao you can get a tune on most any vehicle and unlock HP its not gonna make it an SRT.
@@Umar-1e What important information? please give me an example. I always thought they showed you the important information, you know on your dash and gauges? cause seeing the information on the supercharger you don't have seems pretty silly to me.
This is amazing!, instead of spending $250 on the infamous TaZer i can do this for $50, thanks man
Glad I could help, i have been preaching this for a long time. Not too many people believed me. I performed this option on about 50+ Chrysler and Dodge owners here in Dallas.
@@imagecartel1 out here dropping gems my guy💪🏿💯. I was looking at charger or Challenger for around 13k but all I see is a 300s. I getting one and supercharging it and needed this video .
@@invalidusername_5101.. ... p
@@imagecartel1what kinda dodge cars did you do this too??
Brother do you think this will work on a Durango rt 2014? I assume it works on charger/challenger/300 cause they make srt versions of them but not sure on the Durango since the tazer doesn’t have the same features on the Durango than the challengers/chargers etc
This method is great for the older models. I have a 2018 5.7 300 and I had to get the bypass wire to have it to connect with the software that he recommended. Also, the performance pages “changed” to have the SRT logo, but not the actual timing pages etc.
Can you send me a link to the bypass cable you had to get?
@@SearchYoung this method DOESNT work for newer models.
@@Mr.J281 so the bypass cable didn’t work for yours? i have an 18 3.6 300 same as you just different engines
@@SearchYoung that is correct…it doesn’t work for any models newer than a 2014…I think
I have a 2011 Chrysler 300c and tried but no luck. Would I have to purchase the bypass cable? I used the odb cable he recommended and read it couldn't connect
Does enabling the SRT features in this way also enable the shortcuts the Tazer enables such as turning On/Off the ABS by pressing and holding 2 steering wheel buttons?
Yes.
@@imagecartel1, to use the ELM327 OBDII cable did you have to install any kind of driver software to your laptop, or does it just plug in and work?
@SuperPhilthyrich Man it's been a year but could you elaborate on disabling the ABS by pressing and holding the steering wheel buttons? which buttons exactly do you hold?
@@ratijolbordi4255 this is what they say on page 11 of the Taser manual. Remember, it only works when the Taser unit is installed.
Line Lock: when at a full stop and in Drive, press and hold the left arrow button on the left side of the steering wheel, and then press the Cruise button located on the right side of the steering wheel (the center button on the cruise control cluster). Note that you need to keep the left arrow button held down throughout this whole maneuver. Releasing the arrow button cancels the operation.
Once the ABS light on the dash comes on and “Line Lock On” is displayed on the EVIC, pump the brake pedal twice firmly. You’ll know you’ve done the steps correctly when you take your foot off the brake - the car doesn’t move or roll forward. The ABS has your front tires locked up.
Now, press the throttle and roast your back tires to your hearts content 😁
When you’ve taken your foot off the throttle and your tires have come to a stop, release the left arrow button to return to normal.
If your car fails to return to normal for any reason, put your foot on the brake and put the shifter in Neutral. That should cancel everything out.
@@SuperPhilthyrichThanks a lot man I didnt see that u Mentioned the Tazer that enables that.
I have the 2013 300c 3.6 awd. would u recommend the tazer?
could it be useful on this model or would it be a waste of money?
It worked , thank u for explaining
I asked so many people experienced with scanners and diagnostics they said no
So do you have the srt pages? What year car
what year and engine did it work for you and can you post a link to your elm327
a.co/d/dlrkh3S
Can i configure that on my 2012 Chrysler 300c 5.7?
Have you done it?
Thanks Bro. God will continue to bless you
Its work with 300c v8 5.7 2013
Can you try to find us a updated link with the obd cord in stock
ok
You rock dude for this information.. Question do you think it will work on a 2015 Chrysler 300 Limited v6??
Uhhhhhhhh maybe
Did it work?
@@850wickedyes it works
I can say again. This will work for V8 Hemi models only, the v6 has a different ECU. I have enabled this on cars and Durango from 2013 and newer and every year worked 100% of the time. Did this over 200 times. If you have a 2012 or older I would say look through the comments to see if anyone had any luck. If the 2012 or older models had SRT screens I would say yes. However if you recall the older models did not have much of a screen on the dash and not much on the screen that moved to install DVDs. Good luck and send me a message if you need help.
Just seeing this. Because this was done a while back, has anyone verified if u can do this to the v6
It works on the 2016 challenger sxt
Yes
do i need a licence for the program to work or if licenced it guarantees support i have a 2013 awd Chrysler 300c 5.7 hemi
I have 2013 Chrysler 300c 5.7 hemi. SRT mode not show current gear position. just 2 dashes. do I have to enable anything in The Multiecuscan software? also on home screen shows Sport/Track.
only the two places I suggested
Could you help mine Is not working
I have a 2013 awd hemi if I enabled the sport mode disabled eco mode and also enabled the set pages will it actually put the car in sport mode when I hit the sport mode button? Or is it just for show ?
it will run a bit richer so good if your boosted
I have this car to. Where is the sports mode button on yours?
@@Lakergang213if you click “traction control off its sports mode” but if you have this actived and your on srt pages it’ll shows sport on the bottom right and click it it’ll show you on the dash your in sports mode and it does have a lil more spice to it maybe juss an illusion doe 💀😂
@@v6ixx4446 I gotta get the tazer to activate them on mine unfortunately.
hello!!, I have a 300c 2011 5.7 HEMI and I would like to know if I can activate the SRT8 option. THANKS!!!!!!
I believe 2012 and up
I just did this on my 2016 challenger sxt plus,thank you so much
HOW
Sxt🤣😂
Bruh why would you do that on v6 I understand v8 but sxt bro come on
@@juandelgado8055 would clip your reaction to getting dusted by a supercharged v6😂 but in the clip id show me setting the srt page to eco mode first😂
@@suspectgaming8868 who did your mod riip?
Can you turn off the Eco mode with this
Will this work on on the 2014 Chrylser 300 Flex Fuel, V6 3.6 Liter non S model?
Oh yeah he'll definitely know. He made those cars and he knows everything about specifically your car and all the models and everything that has everything to do with anything so I mean if you need to know how to spell a word or like a math equation also just shoot away He's got you
Can I do this on a 2013 chrysler 300c 5.7l hemi ?
Yes
Will this work on my 2014 300s
V8 yes
I've gone through 3 elm 327's and it's not connecting. Do you think it's the software? I have a 2013 300c.
Having the same issue
You have to go into the settings. Change the interface type and port.
change it to what interface and port?
@@kennethnelson6547 settings in the car or the computer?
Could be the software or the USB configuration on your laptop
That's pretty slick. Thanks
My question is would this work on a 2018 RT Scatpack. Such as giving me the different modes like street/track/eco modes
Yes.
Use Alfa obd
When i goto buying this obd scanner it just shows that it supports ford cars, can i trust that it will work on my chrysler 2011 hemi?
a.co/d/dlrkh3S
I have used this setup for over 200+ Charger, Challenger, and 300’s with the V8, worked every time.
What do you plug that adapter into
Your butt
I'm gonna get it and see if this will work with my 2011 grand cherokee with the 5.7
Did this work? I have a 2014 Durango rt
How to update serial port settings
Any luck
I’m stuck on the same thing
I can’t find it on Amazon anymore we’re else can I get it from?
Can somebody help please
help with what?
@@imagecartel1 I need assistance my coolant gauge is reading wrong after enabling (SRT VEHICLE) for my 2012 Chrysler 300c 5.7 hemi
@@plugrixhese7264 log back in and disable SRT.
@@imagecartel1 yes I did but I was trying to figure out a way to still have it enabled n fix dat issue
Any suggestions?
I'm curious which Chrysler OS would be used on a 2015+...any idea?
WIN95
Does this vehicle have factory remote start?
yes
Who can i pay to come set up this program for me? Because this is need. DMV
See I was wondering if it would change your John Vavratos start up screen to a SRT screen but i see it didnt.
Did u get any luck doing it?
Yes. But I liked the JV startup better than SRT.
It doesn’t damage the car it’s basically just a promgeam correct? for a 2016 Chrysler S comes with the 5.7 Hemi
D as I mentioned and will cause no damage. It mostly just enhances your GUI
Hello, with this program can you make a dvd in motion so you can watch music while driving?
No
Has anyone been able to do this on a Dodge? I tried this on my Challenger, but the software doesn't "connect."
Yes,just did this on my 2016 challenger sxt plus
@@expensivethingsteam7563 can you send the link for your odbII elm327?
I have a question
Did you change anything internal my b buddy afraid for me to do it since I have a 2011 300c like do you have any tunes? Or everything was stock when you did this
Everything was stock, if you are just enabling SRT mode, it will not mess anything up. If you decide you don't want it anymore, log in and disable it.
Nice but it’s working with +2015 ??
This is awesome video
You are amazing, thank you so much
Hi can i ask you
Thanks. Do u know if i can change the car image? I have a journey and its showing another sedan
You're driving a van? Why are you here
@@TRICKYBYRD cmon kiddo
how do you change welcome photo to john varvatos?
That is a factory option.
Can you also disable eco mode
Yes
do you have a way to enable NAV for the dodge challenger
Can you show the software for your computer please
I swapped to a 300s v8 motor on my 2011 Chrysler 300c but still can’t get the sport mode only pages so I feel like I missed something during the swap but WhAt do anyway one have any ideas
There’s a section where it shows srt on dashboard it showed sports mode u can enable same way
Wouldn’t let me download
can you send me the link to buy the software
I wonder if you could do this on a 2012 SRT8 Grand Cherokee? I have a 2012 SRT8 but I don't get those options on my screen I just get the lousy whatever screen comes with the rest of the Jeeps. I'm not quite sure when they introduced it into the Grand Cherokee lineup but I wonder if I can get that online. I don't know if it's got the connections already connected up or what the case might be but I would assume if they did it would already be on the screen.
Well I did this, it 100% it’s cool to have, but then after running my car 2 days my engine light came on.. errors U0002 and U0126 errors with the canbus module and the steering angle sensor, not sure if the performance pages messed with my car or if It’s just bad timing
So what happened? I heard even with the Tazer this sometimes happens with certain models as well. But did you disable it?
@@Tx_Jay_ the check engine light went away the next day, no clue what happened, but it’s been a week or 2 now and haven’t had any issues, I still have all the SRT menus
@@Delastic okay nice, might try this
@@Tx_Jay_ yes it is worth it, and $50 for mechanic software, u can use it to read error codes in your car
@@Delastic that's pretty sweet thanks for the info... also what car?
Why would my obd wont connect to multiscan it says failed everytime i press connect
You have to get a bypass wire that goes in your trunk. 2018 and above were added a supposedly security link to help prevent theft from the standard under the dash.
where u able to disable esp?
Yes
On a 2016 Chrysler 300S: does it save? Or am I gonna have to connect the app at each start???
It all saves. Think of your car being in the factory. The engineer will log into the system and tell the computer that it is a 5.7 RT. The same computer is used on the SRT, so they log into the same computer and enable the SRT options.
Didn't work for my 2018 5.7 daytona dodge charger
I think you need to access through a remote OBD port like Tazer requires for 2018 and newer model...so buy the remote port from Tazer and it should then connect.
I had it then dodge fucked up my settings
What cord are you using can you send a link please?
a.co/d/dlrkh3S
Says it’s outta stock but they have similar versions.. Could those versions possibly do the same thing?
As long as it is not the bluetooth option. From what i researched they said do not get the BT option on the cable.
Is it the latest software on website that’s available still work
I never updated the software or had to. Still using the version in my video.
I need help, mines wont connect i am getting a message “Wont connect to Ecu check serial port settings and cable
What cable did use? You have to update the serial port connection settings in your laptop. I don't have my Varvatos anymore so no way for me to check.
hey bro how did you change the boot screen?
When SRT is enabled it adds all the options for SRT, bootup, G Forces, race time, and logos
Hello I have a 2015 300c will this work?
yes
Wats up guys? I have. 2012 Chrysler 300c Luxury w/o Sport Mode. Looking to update to the SRT version for the uConnect.. Which plug and play is Available?(as I seen some saying the one you got is not available anymore) And would I be able to turn off the MDS like the Diablo13 does? Like I was pausing the video to see some of the other options you can do and there's a lot to explore on there. Wonder if you can update features to the FOB as well as well as not needing the LockPick so you can play movies or music videos while driving? Appreciate the input/feedback if y'all can help a 5.7L v8 Brotha out LMFAO 🤣🤣
Did you find out any info because I have the same car but mine a 2013
Any update
Will this work for a 2017 Chrysler 300 limited?
Does it have a 5.7? This should work
Can you do this on a 2011 300c
No
Why not?
Reading thru the comments and I 2 to 3 comments say it won’t work on a 2011 300c. Why? I’m confused
Tried it on my 2011 300s. Didn’t work.
@@charlielunsford yea me to wasted $50 dollars
@@charlielunsford gotta upgrade the whole radio, I even got a sport button now
@@traphousecarter same 😭. I got it to work on the cluster just not on the uconnect :(
@@traphousecarter I plan on getting one of the Tesla screens. But they’re like 700$ 😅.
I know Im late for the party. I downloaded the software and purchased the correct obd cable, but no luck. Any help would be greatly appreciated. Tried it on a 2011 Chrysler 300c
Did you figure it out
Negative, I downloaded the software twice, and still no luck. I have a 2011 300c so maybe it doesn't work on that year
2014-2017
Only applies to the years when the larger touch screen was added.
Does this change the shift points and give more power and throttle response or it’s just for show?
It works
How do you get the sport mode enabled?
lol i had the same question but im assuming you just click on it
300c john varvatos edition has factory sport mode . It can be enabled from display
Does it work on 2020 300s
I have a 2021 300s 5.7 Hemi and it doesn't work. My ISO Code is BCM4166 which is showing up as "UNKNOWN/UNSUPPORTED"
What if you want to remove it? How you do it?
You just log back in and disable the SRT option.
Haha this is awesome! Thank you! Much cheaper then tazer😁
Hey bro if this enabled then what happens to the settings page?
It automatically deletes it and bricks your screen out
@@TRICKYBYRD wym?????
It’s still there
Can anyone inform me if this method works on the 300s
Yes, mine was a 2013 300C JV
Can this work on a 2011 Chrysler 300 ?
No
Bro do you think my 2012 Dodge Journey could do this?
No.
I got the same car. How much to do it on mine????
Where you located?
Didn’t work on my 2014 Dodge Charger Rt😢
Hello ,can you guide me in Procedures
Can you disable speed limiter?
Never tried, but there are a lot of options to mess with, i just didn't want to go that far, just SRT mode.
can you do this on a wifi obd2 ??
Did you tried with obd2 wifi??
Do you need to install anything else besides the multiecuscannner?
Update the serial port setting and use the software that is from the UK as i explained in the video.
When ever I enable SRT VEHICLE the coolant gauge seems to be miss reading
Can this work on a 2011 dodge charger rt hemi
Does it ?
What happens if you enable sport mode on a 300 that doesn’t come with it from the factory? 🤔 I have a 300C AWD without sport mode. I’m just curious if there would be any changes if I were to force enable it.
No change. It just enable SRT Performance screen
the S version has more then just ECU differences then the C version, so even if you could, the only thing gained would be a change in shifting and throttle response.
Im wondering the same question
the 300S V6 has VVT, the 300C doesn't
@@TheWarriorsFromHell just wondering but what's VVT? Is that what makes sport mode have different throttle and gear timing? Which is Variable Vavle Timing?
You think this would work for a 2011 charger rt? Thanks
Does it ?
Funcionara en un chrysler 200s 2016?
No
Would this work on a stock Chrysler 300s V6??
Wish I would of seen this before I bought the tazer lol
How can you get super track pack mode
It didn't unlock the horsepower!😩
No, you would need to get an upgraded chip
@@imagecartel1 An upgraded chip? That's the difference between the 5.7 and the 6.4 SRT? lmao you can get a tune on most any vehicle and unlock HP its not gonna make it an SRT.
I have the same car
Can this setup disable the ECO mode on my V6 2014 Base 300?
I have a standard 300c 2014 AWD v6. Would there be any downsides in doing this to my vehicle, if i'm even able to do this to my car?
😬hah?
@@TRICKYBYRD yes or no trickybyrd
Question can u activate the dvd player while driving
Hi dear can ask you ?
ja das wäre mal etwas aber wohl hier nicht zu machen
Walk away before bankruptcy number 4
Pro said v6 hemi😂
Why not just buy an srt!!!
Why would you buy a whole car for performance pages dummy
erbody can't afford an Srt
Because the SRT page’s show you a lot and important of information for your Chrysler that’s the point
@@fuegococoa Why would you want SRT performance pages on a non SRT vehicle dummy lol
@@Umar-1e What important information? please give me an example. I always thought they showed you the important information, you know on your dash and gauges? cause seeing the information on the supercharger you don't have seems pretty silly to me.
a.co/d/dlrkh3S