Did I Just Ruin My Drift Truck With This Body Kit?
Вставка
- Опубліковано 16 гру 2023
- Today we install this rare body kit and fender flares on Drift Truck V2! What are your thoughts? Do you like it? Or did I ruin it?
SUPPORT ME HERE! ► / gingium
OTHER VIDS!!
Quick Builds► • Quick Builds
Drift Truck ► • Drift Truck
Rally Miata ► • Project Rally Miata
Eclipse ► • 1G Eclipse
LS Volvo ► • Volvo Sleeper
BE MY FRIEND!!!!
Follow me on Twitter ► / _gingium_
Follow me on Instagram ► / gingium
MY RECORDING EQUIPMENT!!
Camera ► amzn.to/3lVq7J9
Lens ► amzn.to/3yhf168
Microphone ► amzn.to/3q4pv5x
Tripod ► amzn.to/3pOGiZR
Carry Bag ► amzn.to/3rV50uz
SD Card ► amzn.to/3lQdv68
MY FABRICATION/MECHANIC EQUIPMENT!!
Welders & Supplies ► www.usaweld.com/?Click=67190 (code: GINGIUM)
CNC Plasma Table ► store.langmuirsystems.com?aff=23 (code: GINGIUM)
Tube Bender ► www.roguefab.com/ (code: gingium25) - Авто та транспорт
I think the truck looks a lot better, but I’m very excited for the full wide body! Box flares would look sick, like an e30 bmw body kit might fit the style of the truck
Definitely agree I think the round bubble fender flares up front just don’t match the lines/styling
Yessir box flares would be way better because how square the body is
Box flares would be insane!!
Yeah if it was me, I would've started with the 4X4 fender and bed base, and cut the stock metal in sections and built the box flares from the metal directly on the truck.... IDK if he knows this is what can be done.... otherwise, even if he got matching round flares for the back and a wider wheel and tire with a fitting offset to match the front, it still would've looked pretty damn good, but having a "widebody" on just the front looks silly 😅
Edit: disregard my statement, it seems I paused and commented a second too early as literally after commenting above and continuing to watch, he said he "might" do exactly as I said 😅🤣
If he reads this, think pie cuts, for fenders, just cut them in sections and bend them to the desired shape, otherwise, make some box metal over fenders with all the stuff he's got around and then weld them up and finish.....done
DTM style widebody would be absolutely sick. Kinda like those awesome Audi transam cars from back in the day
Yeah, kiiiinda like that!
The flares being so round for the wheel well makes it look a little funny to me as well. The metal wide body might be a little hard to fix in the instance of a crash, but I’m stoked to see it. As for the rest, The skirts look really good, but I would add the parts to at least the sides of the rear of the bed as well, it’ll look pretty good and level it much better I think. As it sits, the rear is higher than the rest by a good bit
This truck has really shown your progress on engineering and fabrication. I remember watching you take Molly to car meets still living with your parents. This is the quality I want to see at SEMA also, something that shows true skills. Been following your build while I build my Honda k20 turbo swapped 73 MGB roadster, throwback to the Datsun roadster build also.
Those old fenders look so much better, I'm glad they're back on the truck. I also really think you should stick with that exact red; it looks beautiful and it's part of the drift truck's identity imo
The flares look good, but they'd look a lot better if the back of the truck was wide body too.
I agree now!
Those exhaust plates stood out to me.
Stood out good? or stood out bad?
@@_Gingium_ stood out good, those things looked hella fresh
@@_Gingium_ good
I’m old enough to remember the mini-truck scene from the early 90s. There were some wild body kits for mini truck back then. The Truxarossa definitely stands out in the memory banks.
And I don’t mind the flares. I think it looks better than 4” of tire sticking out.
Those body kits were so sweet i remember the ads for the blazerossa kits
@@jacobjohns6047 yuuuup 😝
It looks perfect. The metal bodywork and paint will be next level. Great work man
Just need a roof and a bed wing nothing agresive💪🏼greatings from Aruba!!
I love the flares, they make me think of 70s cars like TE27. I would put the 2WD bed back on and flares on the back too.
But I did so much work to the 4wd bed to make it fit 😭
That super wide front end makes the truck look like a body builder that forgot ALL the leg days.
For bring an old body kit it’s in great shape a big diffuser would be great since you don’t have to worry about the exhaust
Cannot wait to see you learn how to make your own widebody kits. Future builds will have so much more potential with that under your belt. I'm sure some day you'll be doing body stuff just as crazy as what they do on B is for Build
A Group B / DTM style would be my thing. Something like a Golf Rallye / BMW M3 DTM. Either steel or fiber stuff. With a plasma cutter I think you could do some magic if you went with steel.
The flare you have there now is going against every other line that the car has. It totally destroys the boxy feeling and the look of the car.
I’m so glad you going with a custom wife body front and rear getting it to the same track with going to be a killer custom truck…….. the fabrication in your videos is what keeps me watching
Says we can watch the next video early on Patreon
Me who’s watching this video early on Patreon:
👁️👄👁️
I'll drop the next Patreon video now 😉
That vented fender idea sounds so fucking sick. I think you should keep the front trackwidth wider! If you don't like the way it looks you can always widen the back later.
Looks great and much more complete. Very nice heat plates for the exhaust so cool. 💯
I was not minding how the truck was looking when you put on the body kit, but I agree the fender flares don't really work. But I'm only saying it because you said it, so it's a minor issue in my mind because you did need to do something about all the wheel poke.
Also, I love the idea of wide bodying the truck out.. I kinda hope for the back you can find some fat looking tubbies and make the truck look a little dully pickup if that gives you any fun ideas to work with.
Absolutely stoked on this build and every video that comes with it!!!❤
Not gonna lie the underglow caught me totally off guard, but I love it 😍😍 I love the look of cars driving on the road with underglow, and to see it drifting? That would be way sick
May of been a short video but it was such a banger. Drift truck looks so hot 😩
Glad you enjoyed!
*Coming together really well!*
The exhaust tips are growing on me. Skirts tie the look all together nicely!
So sick seeing your vision come to life! I think it looks dope, super aggressive drift stance.
Metal widebody NOW! So much fun watching your fab videos because they're so relatable.
It's a start, and it's justified. Deals with the poke, fills it out a little bit. It's just not done yet, that's all :>
Love the idea of watching you fabricate a wide body!
I love this build series, in fact you inspired me to do this but with a fwd truck that I converted to rwd and put a volvo t5 engine in it, keep up the good work man
This is the first video I’ve seen since you first got the “new” shop , I stopped watching due to a bunch of personal reasons but I’m amazed at how far the drift truck has come since then, Now I have a lot of videos to watch up on !!
You might look at pre-runner style glass fenders. Idk, if they even made them for that body style of the Mazda truck but it might be worth checking into.
front looks sick I think you should just mold it together... but wide body the rear too
The exhaust bits would look sick painted silver. I'm excited for the widebody!
Was awesome to see this truck at the track this weekend!
I love your truck. I like how you think and the way you approach the mods. I look forward to seeing what you come up with for the front fenders. That will be cool.
I like your future plans but also looks great as is as well!
This truck is sooo sick! Love the lighting upgrades and the body kit makes such a huge difference!
I've been thinking since the beginning that it'd be really cool to use two 2wd front fenders on each side to get it wide. I think you could keep the 2wd fenders for the front and top, then add a second 2wd fender as the wider portion, probably cutting it down at certain sections to make it look very intentional (I'm a big fan of the 2wd fender look, but whatever you prefer)
So here's what I'm thinking: maybe at the front, cut the outer fender straight down (with a curve following the headlight line) maybe a few inches back, which could be made into a functional scoop or just be open. The sides near the door could probably be kept original, but probably easy to get creative there. The tops, you could probably add an easy flat panel where you could add big fender vents, or maybe just keep it wide open with only the braces showing?
I love the narrow look of the truck, think that looks so cool. I think doing it with two fenders would keep the narrow look and not need to do any of the body work to get the area near the headlight to work. Feel like it'd be really easy to make that look goofy and not be totally happy with it. This way, I think you could keep the original body lines much easier and make it all look more *right*. Whatever you end up doing will look great I'm sure, very sick build!
Awsome! I think a roof spoiler would look good
I think the truck is just mega! Super well done!
I was thinking the same thing you was haha It does look good, though. I definitely can't wait to see what you do with the metal wide body, though. I bet it'll be sick. Loving the videos, dude!!!!
Hey I know you were thinking about fabricating a wide body but these trucks have a large aftermarket for prerunner parts and I would love to see some of those really wide fiberglass bedsides slammed going sideways, I think there’s a lot of potential in fabricating those parts
Definitely like the idea of the metal widebody with a square look, like some time attack cars 👌🏾
Haha that intro was great. The truck is looking great
Looks sick! I do think it would look more complete with the rear wider and with some kind of body extension behind the rear wheels. Overall awesome though.
I think the bed sides need that little piece for the sides just so the kit don’t abruptly stop
The kit looks freaking dope bro 🔥 I honestly wouldn't touch the front. The front looks perfectly fine, I would focus more effort on making the rear match the front.
I absolutely agree with your Optinion, the Front fenders don’t Flow with the Lines
Loving the drift truck content! Can't wait to see it all one color! Built official is on your side of the country and builds one-off wide body kits for his cars! Might check out some of his stuff on UA-cam for inspiration if you haven't already!
I agree the back kit is dope but fromt definitely need work like you said
Looking forward to seeing a fully customized wide body!
The truck's looking good, dude!
Maybe do a big custom defuser in the rear under tray to tie in the body kit to the rear? Looking good!
Widened fenders is an amazing idea, it’s going to look awesome!
For widening the fenders, to make it look good around the headlights you can take inspiration from the 306 maxi or the 205 t16 rally cars.
But overall, it is super sick truck
I would run the full body kit. Looks dope
great but need wider rear axle to match with the fat front
The side skirts look pretty great! The other stuff I agree that I'm not a fan of it. Hopefully the metal kit will look way better
Rear end now looks like you ran out of material or didn’t have the pieces. It needs something.
In my opinion I think you should add the rear bed sides too. It ties it together nicely.
Dude. Swag level has increased substantially.
Factory TRD flares for a KP61 starlet, google them, theyre round over the front and square at the back. Copy those but for this truck, it already is a boxy 80's vehicle it would look absolutely perfect.
There is an English UA-cam channel called The Anarchy Garage, they have made a wide body kit for a Mercedes Estate. Basically they just brought another car, cut the front and rear wings of that car and welded them onto the project car with a piece of metal filling the gap. As you already have another bed and another set of from wings you have everything you need. There car was supposed to look rough but I’m sure you could do it and make it look like it is supposed to be there.
Or how about using some jeep Cherokee overfenders. Would suit the car more with the squared arches
TBH metal wide body sounds amazing. But it has to be super functional so that it keeps the chances of breaking low. IMO some Audi style box flares would be amazing, and the truck already has the body line to make it wider in that style. I could help you design or sketch that out
Favorite car content as always, keep up the good work!
This truck looks freaking awesome!!!!!
Metal widebody will be sick, new skill for you to learn too!
Mooore Fabrication! YEEEEESSS!!!
Curved fenders on a boxy truck doesn't look too good, definitely should do the custom widebody.
It'd look a hell of a lot better if the rear track width matched the front.
custom metal fenders isn't the way to go on a drift vehicle; easily replaceable plastic fenders is. what you have now is perfectly functional and will look sick with a wrap+livery
This. Also I’ve never seen a proper drift car without a much wider front track than rear. I really hope he doesn’t change it for all the people who have no idea how to build drift cars
He needs to find a box style front flare to make work the flares was a good idea just needs something more rigid to match the body lines/style
@@fadariansmith1043 box style flares are easy enough to build and they wouid look sick. it's just not really worth it to go to the trouble on a learner vehicle. fenders get banged up immediately, and I would always prefer tear-off plastic ones over custom-built sick ones
It would require a ton of plastic/fiberglass work in addition to the sheet metal fab, but if you widen the entire front clip from the middle instead of adding on the sides I think that would look the best.
Rear needs to match up with front deffo.
And metal wide body is true sign of skilled builder 👊🏻
i think a sick wrap on this truck would be amazing
I think keeping the wide front will look better looks super aggressive and especially with the front flares it will look great
4:00 If you are alone and want to push the car, put a wrench in the wheel and turn it :) It's much easier
To widen the rear track, you could get a wider 8.8 from an early 80's Ford F100 pickup. Extra width, and same bolt pattern with the F100, not F150. Just an idea.
Looks bad ass but it needs another set of fender flares with some spacers in the back
damn son, would love to make one piece wide fenders for ya, but being on the opposite side of the country makes it a bit hard, but if you need autobody help I'm here, sadly not a patron, but I'm here for ya lmao
Iirc the rear axle had an off-center diff, and one side was shortened to make it centered and symmetrical. If you could get another of the same axle and lengthen the shorter side to match the longer side (or lengthen both sides of the current axle), it would probably come a lot closer to matching the front track width.
Love it!
Do sort of a boxy DTM kit for it
I'm not sure if you've mentioned it in another video, but do you have plans to paint it? A metallic maroon would be fire, and would still allude to the original color.
In the last video where he fabricated the truck he said that the very last thing will be to paint the truck. He intends on doing a complete tear down after the truck is dialed in.
Could be wrong tho, just what I remember from the last vid.
Yes! I'll be painting it once its all dialed
@@_Gingium_you should look at factory 2nd gen ranger colors, my Ranger is a dark metallic red and it looks really nice
Looks better but keen to see the custom body kit.
I like it, has a personality. Truck is wrong color now. Hurry up G!!
This truck is so dang cool!
I’d think the narrow rear track probably helps with drifting more than anything. Sure it looks odd, but function over form, if you ask me.
I am wanting to do custom front guards on mine so be kool to see how you do it
The same flares on the rear with concave rims would look good. Getting all four corners with the same rim type will be difficult, though. It's gonna come down to $$$
I would make M3-E30 type fender and bed widening. Think it would look sick on this truck, and its not "to difficult" to make.
Could you get a set of Prerunner style fenders? They looked pretty good on GrindHards Ranger.
7:36 did you hesitate saying spray pattern because you got flashbacks to counter strike
Definitely try and match front and rear width! Almost hoonitruck look
love this truck sm
Hey Caleb. Take fenders from a 1990 isuzu mu. If you find one in a junkyard take rear too
Looks better but I think tne white wheels are up for a change to complete the transformation.
yes please do metal widebody
Sideskirts looks great! Fender flares might look nice but it desperatly needs similar track width in the back. Nothing will look right before that's sorted. The difference is just to big to ever look great.
The flares add a roundness to a square hard lined truck. Run a square widebody, should flow a bit better. Cheers!