I have a question. I want to divide various actions, but no matter how many options I adjust, there is no response. It is possible to divide the time and set it, but the movement is unnatural. (1,2,3,4,5) I want to do motion motion in sequence. Do you know how?
Добрый день очень прошу подскажите. У меня стоит следующая задача- есть рейка со спец профилем нужно прокатать относительно нее цилиндр и получить профиль зуба. Результат прокатки я должен использовать для нарезки зуба. Прошу покажите как именно прокатать и получить шестерню.
Hello! Thanks for your sharing. It's really helpful to understand the results of a mechanism. I have a question; At the beginning of video, you chosen "dynamic" option. Why not "kinematic" ? What would be the difference? See you...
Kinematics only focused on displacement, velocity, and acceleration. No force (applied & inertia) considered in the calculation (simulation). Meanwhile in dynamics, all force applied or involved will be calculated. For this video example, we have goal to determine the torque required for the mechanism, therefore all load applied include weight load due to gravity should be considered in the calculation. Thanks.
good explainaiton. Thanks for educating.
Thank you very much. All really good explained. To say useful is not enough:
Really helpful video 👏🏼👏🏻
THANK STRAIGHT TO POINT, OF YOU COULD PLS MAKE ONE ON COMPARING THE JACK SCISSOR ROTARY(Z),
, RACHET, PONOGRAPH , SAME TEETH, ACME,
great video, could you please further explain the screw ratio in the screw joint?
screw joint is translate and rotate as like cylindrical joint . is that possible that cylindrical take place of screw joint at 7:05?
Based on my experience cannot. Screw joint better and easier to setup for both movement.
I have a question. I want to divide various actions, but no matter how many options I adjust, there is no response. It is possible to divide the time and set it, but the movement is unnatural. (1,2,3,4,5) I want to do motion motion in sequence. Do you know how?
Добрый день очень прошу подскажите. У меня стоит следующая задача- есть рейка со спец профилем нужно прокатать относительно нее цилиндр и получить профиль зуба. Результат прокатки я должен использовать для нарезки зуба. Прошу покажите как именно прокатать и получить шестерню.
can we design hydraulic lift NB mechanism with this software?
Hello! Thanks for your sharing. It's really helpful to understand the results of a mechanism.
I have a question;
At the beginning of video, you chosen "dynamic" option. Why not "kinematic" ? What would be the difference?
See you...
Kinematics only focused on displacement, velocity, and acceleration. No force (applied & inertia) considered in the calculation (simulation). Meanwhile in dynamics, all force applied or involved will be calculated. For this video example, we have goal to determine the torque required for the mechanism, therefore all load applied include weight load due to gravity should be considered in the calculation. Thanks.
Thank you
You're welcome. Thank you for watching my channel.
Nice, could you share the model files?
Can you share the model of this scissor jack?
thank you so much :D
Hi.. you're welcome
How much is the minimum torque required plz share the pdf
remove "NB"