A QUICK SNATCH | Jobbing around day

A bit of a mixed bag of plumbing jobs in this one, we have an immersion swap, I show you how I fill up an underfloor heating system and I have look at a new job where I start to get things drained down and stripped out.
As always, thanks for all the support, it is greatly appreciated
#plumber #plumbing #dayinthelife #apprentice
00:00 IMMERSION SWAP JOB
03:28 UNDERFLOOR HEATING JOB
09:57 DRAIN DOWN JOB

[@hughwilson4911]

That was a belter Tom, rather you than me snatching a cylinder that size. Chin up mate.

[@PlumbLikeTom]

Thanks for the support as always mate, I took a chance as it was in a boiler room, the was only tepid at best as well, if it had been red hot there would be no way I would do it

[@riptiz]

Proper old school that heat exchanger and the coal lorry. Looks like it’s been a bit of a bodge. Proper 70’s bathroom suite.

[@PlumbLikeTom]

A love a coloured bathroom suite, they will all be back in fashion soon, thanks for watching as always

[@dennisphoenix1]

I expected a lot more water to come out of that cylinder when you snatched the immersion. I might try it One day 😂😂

[@PlumbLikeTom]

They tend to hold back on an air lock, I wouldn't try it though in an house or if the water was hot, I also knew this would come out Ok being fairly new, sometimes a completely failed element will warp a bit making it hard to get out the hole, thanks for watching as always

[@Charles61284]

Nice job with that snatch Tom, saved a load of time. Great vid as always mate

[@PlumbLikeTom]

Thanks for the support as always mate, it would have took a good half hour to drain, I wouldn't recommend snatching them though

[@heatpump8566]

You can measure to see if the immersion is knackered mate. Power off your looking for about 20 ohms or check for an earth leak. Great one as usual

[@PlumbLikeTom]

I couldn't quite remember how to check them to be honest, this one was constantly tripping the RCD and was under warranty so I just changed it, thanks for watching as always 👍

[@chrisholt2474]

Hi Tom, a nice take out there Tom, like yourself I always enjoy examining the old pipe work while removing it.
It’s even better when it’s time to weigh it all in. The underfloor heating jobs are always interesting for me, I haven’t done much of that
and I’m a bit to old to get involved now. Another great film thank you Tom, have a great week and as always take care. 👍👍👍

[@PlumbLikeTom]

Thanks for the support as always Chris, the weigh in should be nice at the end of this month, I've had a few good strip out jobs, I much prefer working in older buildings and enjoy figuring out how stuff was done originally, have a great week mate

[@thomascoyne157]

Nice team work there on the change over I did see the Slight step back as he knew the nut was coming on done😂 good video 👍👍👍👍👍

[@PlumbLikeTom]

Thanks for the support as always mate, teamwork is dreamwork, sometimes it's nice to have a mate on jobs like these, shared responsibility when it all goes wrong 👍

[@karl212]

No messing tom ....💪....quality work as always ....best plumbing chanel by far 👍

[@PlumbLikeTom]

Really apprecaite that mate, glad you enjoy the content

[@keithbrueton]

You can't beat a good rip out Tom, nice job as always.

[@PlumbLikeTom]

They are nice with the scrap, thanks for watching as always Keith

[@andyfadian]

Another enjoyable video Tom, again thanks for all the effort’s you go to. 👏👏

[@PlumbLikeTom]

Thanks for the support as always Andy 👍

[@MegaShan001]

Nice snatch Tom 😊 I havnt got the balls to do it 😂
Good video as always pal

[@PlumbLikeTom]

Thanks for the support as always mate, It is easier with two I find, shared responsibility when it all goes wrong

[@tonymurff5234]

Nice snatch job on the cylinder Tom,
Brilliant video as always mate,
Lots of Beers 🍺 money in the scrap 😂
👍👍🤜

[@PlumbLikeTom]

Thanks for the support as always Tony, not a big drinker but could do with a new watch strap, might have to treat myself

[@paulf2529]

Fair play snatching that immersion.

[@PlumbLikeTom]

Thanks for the support as always Paul, it is greatly appreciated 👍

[@SteveHit1]

Excellent video, with an interesting range of jobs.
Impressive immersion snatch - only for those that know what they’re doing!

[@PlumbLikeTom]

Thanks for the support as always Steve, they can go wrong, to be honest I wouldn't normally do that but this was basically outside and the water was only luke warm

[@pb9926]

Great video Tom. You can't beat a good rip out with plenty of scrap - car boot money 👍😎

[@PlumbLikeTom]

That's it mate, thanks for watching as always PB 👍

[@peterdawson5115]

Interesting jobs as usual Tom, that last one will be £ when you get to the scrapyard 😊 hope you have a better week, the ups and downs of plumbing🪠🚽👍

[@PlumbLikeTom]

Thanks for the support as always mate, I do need another weigh in soon, last week was a bad week, a few jobs that I wasn't happy with what other trades had done

[@tirvplumbing]

Sorry to hear you're having a rough time. Hope things get better for you. Always interesting seeing quirky properties. 👍

[@PlumbLikeTom]

Thanks for the support as always mate, it was just a bit of a stressful week

[@CommercialGasEngineerVideos]

First! Av it Tom. No one can plumb like...

[@PlumbLikeTom]

Thanks for the support as always mate, it is greatly appreciated

[@johnwaby4321]

Busy busy there Tom .nice job on the under floor heating pipes.
Ripping out is always a pain 👍👍👍

[@PlumbLikeTom]

Thanks for the support as always John, the only good thing with ripping out is the scrap

[@BigBaz23451]

Brave man taken that immersion snatch on 🤣 I’ve seen those immersion just spaghetti and become a nightmare to come out so many times , as a heating engineer even I had anxiety 😅

[@PlumbLikeTom]

I've had that too mate, this one was only 6 months old though, I fitted it and had to swap it under warranty, thanks for watching

[@BigBaz23451]

@@PlumbLikeTom nice one Tom , always great content 👊🏻

[@diddywright6165]

Good content as usual mate, brave snatch that Tom, hats off to you👍🏻

[@PlumbLikeTom]

Thanks for the support as always mate, It was brave if it went OK, stupidity if it went wrong

[@nmd14723]

Tom you look stressed out mate, take some time for yourself and relax, nothing is more important than your health 💪

[@PlumbLikeTom]

Thanks for the support as always mate

[@alangriffiths8401]

Pound to a penny if I did that snatch, I would have cross threaded it --- hope this week is better for you.

[@PlumbLikeTom]

They can go wrong, thanks for the support as always Alan

[@brianmayne6513]

Plenty of scrap Tom

[@PlumbLikeTom]

it's building up nicely again, thanks for watching as always mate

[@johnturrell942]

Simple check with a meter.

[@PlumbLikeTom]

You are right, I swapped this one out as it was under warranty, no charge for the customer

[@johnturrell942]

@@PlumbLikeTom top service 👌

[@jockster5525]

Nice one mate..too many adverts adverts adverts adverts tho

[@PlumbLikeTom]

Sorry about the adverts mate, from the 1st of November creators will get more say on where adverts are put in the video, even when I turn them off they still appear on the videos, I guess google has to make money because of all the server space these videos take up, I make very little money from them, and I I'm not sponsored in any way so the actual videos themselves are not one big advert for a product if that makes sense

[@SuperWayneyb]

🤘😎🤘

[@PlumbLikeTom]

Thanks for the support as always Wayne 👍

[@user-pi3wz1wz3x]

Did the PRV from the boiler tee into the return in the loft with a remote PRV fitted ?

[@PlumbLikeTom]

No, that's as it was mate, the heating pipes went down, shocking install really, thanks for watching