I like the choice of electronic, its very budget friendly. I went with more expensive electronics( g7p, dasmicro v6, agfrc servo, 5500kv brushless motor and esc) If you don't mind me asking, what you're lipo batteries specs and how long do they last normally?
its a 2s 400mah Lipo. I think it lasts around 25-30 minutes (I've never timed it) I think you picked some good electronics! The brushless setup will be sweet!
Be careful when adjusting rear toe. They don’t sell replacement threaded inserts so if you get it stuck in there and it doesn’t tighten properly or come out you will need to buy the inserts separately. The rear lower arm on mine is just held together by superglue :/
@@xXwonderingJewXx make sure the belt that goes around the motor is a little loose or has some slop in it. If it’s too tight it will feel like it’s binding up. Even when I had it loose the drivetrain doesn’t feel the smoothest. Seems to drive just fine tho
@APEXRCGARAGE thank you for the reply! I do have some slop on the motor belt, but even with it removed my rear wheels don't spin freely without some force and stay locked up if I try to push it across the floor. I'm hoping once I get mine complete and test it I'm just being paranoid lol
so i wanted to know how much expensive is this car ? i have NSX and ae86 1/18 but this model is better than LDRC of course. so i wanna know the price if i want to buy the same model
@@MrTiago1surf the chassis is about $100 usd. Then you have to buy your own electronics. Or in my case I just used what I already had. It’s Cheaper than other 1/24 kits. The LDRC at $40-$50 is hard to beat value wise. But like most things you get what you pay for. The ACXWA Chassis drives much better than LDRC
Just ordered one of these, I’ve also got a dasmikro v5 on the way. I’m pretty excited to get into it!
omg is so pretty cool, it looks like easy to drive, and is smooth
looks great, i will be using this kit soon😁
Grab a micro receiver as well. Makes packing it in so good.
Do you recomend the acxwa cd over an Ldrc? I want to buy one but i don’t found more videos from the axwa and too much videos from the Ldrc
ACXWA CD is a better drift chassis. But it is much more expensive
I like the choice of electronic, its very budget friendly. I went with more expensive electronics( g7p, dasmicro v6, agfrc servo, 5500kv brushless motor and esc)
If you don't mind me asking, what you're lipo batteries specs and how long do they last normally?
its a 2s 400mah Lipo. I think it lasts around 25-30 minutes (I've never timed it)
I think you picked some good electronics! The brushless setup will be sweet!
You have links or more details to your setup?
sick kit! how long did it take for yours to arrive?
I cant remember, I think two weeks?
Be careful when adjusting rear toe. They don’t sell replacement threaded inserts so if you get it stuck in there and it doesn’t tighten properly or come out you will need to buy the inserts separately.
The rear lower arm on mine is just held together by superglue :/
how much was the total of your setup? planning on buying this chassis after im finished with my k989 rwd conversion.
Was your drivetrain tight after assembly? I dont have all the electronics for mine yet but the diff feels very tight
@@xXwonderingJewXx make sure the belt that goes around the motor is a little loose or has some slop in it. If it’s too tight it will feel like it’s binding up. Even when I had it loose the drivetrain doesn’t feel the smoothest. Seems to drive just fine tho
@APEXRCGARAGE thank you for the reply! I do have some slop on the motor belt, but even with it removed my rear wheels don't spin freely without some force and stay locked up if I try to push it across the floor. I'm hoping once I get mine complete and test it I'm just being paranoid lol
This look really cool. What esc are you using?
@@munarkmusic just a cheap brushed ESC. XYS-BL20A
@@APEXRCGARAGE awesome. Thanks for the reply.
Does the axcwa chassis use the same size servo as the ldrc? Wanted to transfer some of the electronics to it.
No the acxwa uses a smaller servo
How would you rate the chassis build process as a first build? Wondering if i should pay the extra $40 for the assembled one
I built one I would rate at 6 or 7 on a scale of 1-10 hardest was the rear a arms putting them spacers was a pain but but its fine other than that
Oh what body did you get?
Nissan S15
so i wanted to know how much expensive is this car ? i have NSX and ae86 1/18 but this model is better than LDRC of course. so i wanna know the price if i want to buy the same model
@@MrTiago1surf the chassis is about $100 usd. Then you have to buy your own electronics. Or in my case I just used what I already had. It’s Cheaper than other 1/24 kits.
The LDRC at $40-$50 is hard to beat value wise. But like most things you get what you pay for. The ACXWA Chassis drives much better than LDRC
with 100$ u can buy a sakura d5 chassis with a body in aftermarket though