We'll be sure to show that in the next video! But it's pretty simple, lean your bike up against a tree or wall and then you can easily make the adjustments
Hey Jeremy, would this fit a 2024 tenere 700? I got the lowering link and I would like to get the side stand as well but there’s no mention of 2023, or 2024 for that matter. Thanks for these videos man, A LOT OF HELP FOR US, regular Joe’s 🙏🙏🙏
really awesome. Cant wait to get one for Africa Twin. Propably will be universal between all models but just in case im getting a Adventure Sport DXC ES. Africa Twins def need that sidestand. The OEM one is def too short
You'll notice that every side stand out there has a flat bottom, and if it doesn't any high points will be scratched and worn off fairly quickly. So, long term a texture won't really add value. We do however, add a convex bottom and that will ensure a good contact patch with virtually any shaped ground.
I finished installing the side stand. Great sturdy piece. 2 questions though, there’s a bit of a play (just when I put the bike on stand) between the side stand and the piece that goes into the frame with the 2 big 10mm Allen bolts, although the bolts are tight and used red lock-lite as per factory. Also, would it be advisable to leave to bike until the blue locktite dry? (From the side stand bolts) or is this a dumb question? :) Thanks
We designed our side stand based of the factory side stand. So it should fit around the clevis the same as your factory stand, in fact if you put your original side stand back on you'll likely see the same little bit of play. Threadlock is important, if you're using the more permeant threadlock (red) just be aware you may have to use heat to remove the nut in the future. Letting the threadlock dry is great, but not really necessary unless you're going on a looonggg drive that would rattle the fasteners enough to loosen them
I purchased a lowered 2005 Yamaha Royal Star. it has the original kickstand so i have to be very careful where i park it. DO you offer these adjustable kickstands for this style of cruiser bike? Thanks.
I was careful and still snapped the 10mm bolt. Clearly not careful enough. Any tips for removing it? The switch seems reasonably secure without it, what’s it needed for?
Dang, that sucks! We totally get it, we broke one early on in the development days. Let me reach out to the engineers and find out what they did but I suspect it will require an easy out. The switch is the safety measure so you cannot have the engine running, with it in gear and the kickstand down (if you drive with the kick stand down that would be dangerous). It's common to disable this, but you just need to be aware of it.
@@AltRiderLLC yeah I was thinking I could just remove the switch entirely, but then wasn’t sure if the bolt was needed for anything else. It seems to hold in position without the bolt which is weird. If removing it I guess I’d need to remove the stand and then tap it and remove the broken bolt- let me know if the engineers have any great tips, or even know what replacement bolt would be needed.
Ya, your best bet is going to be an easy out, just be careful because the bolt is steel and the Adjustable Side Stand is aluminum (so it will be easy to damage the threads). Its a specialty bolt, so you'll have to get it direct from Yamaha 😕
@@AltRiderLLC I might just ditch the switch all together and bypass it. Don’t think the bolt does anything other than hold the switch in place. But yeah, warning to others, be really careful with this bolt. It barely need snugging up
It's really about feel, and you can easily adjust the stand up and down to what feels best for you. And you may want to make adjustments as you make alterations (tires, luggage, etc.) that alter the ride height. With all that said, we've found 12-14 degrees of lean tends to feel best
Stay tuned to our social media channels or the product page to see when its in stock! Expect it early next year. You can preorder today if you want to get it as soon as its in stock: www.altrider.com/altrider-adjustable-aluminum-side-stand-for-honda-crf1100-africa-twin/pid/3378/cid/1
Ahh - that's super annoying, sorry that happened! I think I know what part you're talking about, but since I'm not certain I don't want to give a suggestion that may not be applicable. Give us a call or email and we should be able to get you a suggestion to get you set up.
Thank you. I tried to Chamfer the end of the bolt hoping that would work, but no dice. I bought a helicoil kit that arrived last night that I'm going to do today - I am confident that will work and I'll get it all put back together and get the kickstand on. It's been an entire process, but the lowering links are on, the side stand will be on, and now I just gotta hope that the aftermarket Acerbis tank I put on will clear the fork tube adjustments well so I can slide those up, too. I'm going to be pretty annoyed if there is a block..@@AltRiderLLC
Alright update - I finally got it all together. I had to do some rethreading of those holes along with threadlocker. The side stand is on and the front forks were dropped 22mm. I'm excited to test it out in a few days! The differnece is amazing. Before, with boots, I could flat foot on one side if I leaned the bike way over. Now I'm at the balls of both feet with slippers on, so boots should be even better @@AltRiderLLC
Thanks Jeromy. Waited for the video so I didn't do something stupid. Works great!! Now I cam trust the side stand angle again.
Excellent!
My 2023 T7 had an absurd amount of red thread lock on those 10mm allen bolts. Other than fighting with those the installation was a breeze, thank you!
Hmmm, we haven't encountered red thread locker before - but glad you're liking the product!
Fantastic addition to my T7, it is a breeze to install
Awesome - its such a simple product, but can really make a difference
Good idea to show them how to adjust it on the fly
We'll be sure to show that in the next video! But it's pretty simple, lean your bike up against a tree or wall and then you can easily make the adjustments
Hey Jeremy, would this fit a 2024 tenere 700? I got the lowering link and I would like to get the side stand as well but there’s no mention of 2023, or 2024 for that matter. Thanks for these videos man, A LOT OF HELP FOR US, regular Joe’s 🙏🙏🙏
Yes, we have confirmed fitment on the 2024 models. Including the World Raid, and World Rally. We have NOT confirmed fitment on the Extreme Model.
really awesome. Cant wait to get one for Africa Twin. Propably will be universal between all models but just in case im getting a Adventure Sport DXC ES. Africa Twins def need that sidestand. The OEM one is def too short
Ya, it will fit all the different models, its available for preorder - for both the CRF1100 & CRF1000!
@@AltRiderLLC just back ordered. I was wondering about the design though. Isn't it better if the foot is slightly textured for a little grip?
You'll notice that every side stand out there has a flat bottom, and if it doesn't any high points will be scratched and worn off fairly quickly. So, long term a texture won't really add value.
We do however, add a convex bottom and that will ensure a good contact patch with virtually any shaped ground.
I finished installing the side stand. Great sturdy piece. 2 questions though, there’s a bit of a play (just when I put the bike on stand) between the side stand and the piece that goes into the frame with the 2 big 10mm Allen bolts, although the bolts are tight and used red lock-lite as per factory. Also, would it be advisable to leave to bike until the blue locktite dry? (From the side stand bolts) or is this a dumb question? :) Thanks
We designed our side stand based of the factory side stand. So it should fit around the clevis the same as your factory stand, in fact if you put your original side stand back on you'll likely see the same little bit of play.
Threadlock is important, if you're using the more permeant threadlock (red) just be aware you may have to use heat to remove the nut in the future. Letting the threadlock dry is great, but not really necessary unless you're going on a looonggg drive that would rattle the fasteners enough to loosen them
@@AltRiderLLC thanks, tho original stand will be permanently in a 📦. AltRider side stand is too nice. Thanks for the fast response
I purchased a lowered 2005 Yamaha Royal Star. it has the original kickstand so i have to be very careful where i park it. DO you offer these adjustable kickstands for this style of cruiser bike? Thanks.
Thanks for your interest! We focus on ADV and dirt bike motorcycles, so we don't have any parts that would fit your Royal Star
I was careful and still snapped the 10mm bolt. Clearly not careful enough. Any tips for removing it? The switch seems reasonably secure without it, what’s it needed for?
Dang, that sucks! We totally get it, we broke one early on in the development days. Let me reach out to the engineers and find out what they did but I suspect it will require an easy out.
The switch is the safety measure so you cannot have the engine running, with it in gear and the kickstand down (if you drive with the kick stand down that would be dangerous). It's common to disable this, but you just need to be aware of it.
@@AltRiderLLC yeah I was thinking I could just remove the switch entirely, but then wasn’t sure if the bolt was needed for anything else. It seems to hold in position without the bolt which is weird.
If removing it I guess I’d need to remove the stand and then tap it and remove the broken bolt- let me know if the engineers have any great tips, or even know what replacement bolt would be needed.
Ya, your best bet is going to be an easy out, just be careful because the bolt is steel and the Adjustable Side Stand is aluminum (so it will be easy to damage the threads).
Its a specialty bolt, so you'll have to get it direct from Yamaha 😕
@@AltRiderLLC I might just ditch the switch all together and bypass it. Don’t think the bolt does anything other than hold the switch in place. But yeah, warning to others, be really careful with this bolt. It barely need snugging up
How much lean (degrees from vertical) should be targeted when on the side stand?
It's really about feel, and you can easily adjust the stand up and down to what feels best for you. And you may want to make adjustments as you make alterations (tires, luggage, etc.) that alter the ride height.
With all that said, we've found 12-14 degrees of lean tends to feel best
Any update on one for the CRF1100L . The stock one is too short. Love this product.
Stay tuned to our social media channels or the product page to see when its in stock! Expect it early next year.
You can preorder today if you want to get it as soon as its in stock: www.altrider.com/altrider-adjustable-aluminum-side-stand-for-honda-crf1100-africa-twin/pid/3378/cid/1
❤Build a Ducati DesertX version please!
Your request will be passed on!
The 10mm bolts had red locktite on them from factory and i stripped out the one on the right. I'm not sure what to do at this point.
Ahh - that's super annoying, sorry that happened! I think I know what part you're talking about, but since I'm not certain I don't want to give a suggestion that may not be applicable.
Give us a call or email and we should be able to get you a suggestion to get you set up.
Thank you. I tried to Chamfer the end of the bolt hoping that would work, but no dice. I bought a helicoil kit that arrived last night that I'm going to do today - I am confident that will work and I'll get it all put back together and get the kickstand on. It's been an entire process, but the lowering links are on, the side stand will be on, and now I just gotta hope that the aftermarket Acerbis tank I put on will clear the fork tube adjustments well so I can slide those up, too. I'm going to be pretty annoyed if there is a block..@@AltRiderLLC
Alright update - I finally got it all together. I had to do some rethreading of those holes along with threadlocker. The side stand is on and the front forks were dropped 22mm. I'm excited to test it out in a few days! The differnece is amazing. Before, with boots, I could flat foot on one side if I leaned the bike way over. Now I'm at the balls of both feet with slippers on, so boots should be even better @@AltRiderLLC
Hey, that's great to hear - glad it's all working great for you!
What if you have a center stand?
Our Adjustable Side Stand attaches the same way the OEM does, it works with our Aluminum Center Stand or the Yamaha Center Stand no problem!