I wish I also had the time to take care of my car. I am so busy for college. I have the whole day from 7:30 am to 6:00 pm in school and an hour of commute. This dude is passionate. His parent/s bought him a car and he takes care of it just as if he bought it himself. I salute you, bro! I hope you receive more blessings!
i did this on my Rb25, did it all up turned on the engine and oil spewed off the side, i guess i didn't tighten it all that good, undid everything tightened them bolts again and no oil squirting out. Drove a couple days with oil burning off the side of my exhaust manifold. Really should use a torque wrench when doing this.
Young, He's a student 'that loves to drift' Been through money hustle through his driving times.. Pushed through cause of his talent, I've been a sub of his for almost a year now :) since his Live For Speed videos :P He's truly one of the most creative drifters. And he does everything himself.
Lol funny story, I didn't have a hotpipe so I cut my old sr one and blocked of the greddy one. Rb's tend to run weird with aftermarket bov's without a tune.
thats cuz the stock one recirculates. which is technically already better than an atmospheric blow off. this way the ecu knows when to stop delivering fuel
Well I do plan on doing something about that manifold, ISIS has pretty good manifolds for the RB. As far as turbo I am not sure yet, kinda low on funds :/ But I would like to do a top mount of some sort :D
Hey valera! i'm a 15 year old boy that realy want to start drifting when i get older and i was wondering what cheap cars you could recomend, i was thinking somthing around a 328i. now i have a ford fiesta 96 with a 1.4 z-tech that i drive on some rally roads that my father owns, Love your channel bro! -Huge fan.
Engine looks super clean inside. Your old SR did not look anything like that lol. Also, you need power tools. Unbolting 35 10mm bolts by hand sucks. Also should have painted dem valve covers purple yo.
I'm not 100% on this, as I don't follow his channel that closely but if I recall correctly he kinda had money raised or something like that, it wasn't just "fuck it"
I have an RB25 series 2 aswell. I wanted to know if you had any plans as far as turbo upgrades or changing that ugly intake manifold haha. I am too indecisive when it comes to what upgrades I want, Figured you might enlighten me with your goals. I would love to drift my RB also.
hi. nice work you do there. congrets! can you tell me, is the S14 reliable for drifting? what about the parts? I live in Europe and it's a bit more complicated with the japanese cars.
Your motor is an NEO like mine, did you use regular rb25 vavle cover gaskets? I've heard on forums the NEO uses different ones but i tried on my regular 25 ones and they seem to fit well.
Where can I get that socket wrench as seen @ minute 3:47? I really like the swivel head top and the extendable hand side option. Yes, I'm sorry for asking where do I get a porn star performance tool like that.
Dash Speed believe it or not, that is a Stanley brand 3/8'' telescoping flex head with lockout. I have one sitting in my 3/8 drawer right now. Best $17 I ever spent, they are a hell of a deal and I have had mine for a few years now. Part number is 7-85-782 but it seems they discontinued them
how does he afford to pay for this. I have a feeling its from good ol' daddy. No way he's a student that can afford an SR swap, blow that up, say "fuck it" and get an RB. Like its nothing. I have an SR swap and that took all the funds I had.
I wish I also had the time to take care of my car. I am so busy for college. I have the whole day from 7:30 am to 6:00 pm in school and an hour of commute. This dude is passionate. His parent/s bought him a car and he takes care of it just as if he bought it himself. I salute you, bro! I hope you receive more blessings!
i did this on my Rb25, did it all up turned on the engine and oil spewed off the side, i guess i didn't tighten it all that good, undid everything tightened them bolts again and no oil squirting out. Drove a couple days with oil burning off the side of my exhaust manifold. Really should use a torque wrench when doing this.
Young, He's a student 'that loves to drift'
Been through money hustle through his driving times.. Pushed through cause of his talent, I've been a sub of his for almost a year now :) since his Live For Speed videos :P He's truly one of the most creative drifters. And he does everything himself.
This video makes a front facing manifold look much more promising on the rb25.
Intake 7-3-2-5-9
Exhaust 8-4-1-6-10
2 - 3,9 N/m tightening
Don’t understand? Explain, I was going to use this video to do mine. I want to take mine off and pain then blue.
This is what I was looking for. Thanks. Is this from the repair manual?
Lol funny story, I didn't have a hotpipe so I cut my old sr one and blocked of the greddy one. Rb's tend to run weird with aftermarket bov's without a tune.
Thank you! You guys always inspire me to make more videos!
I did clean the surfaces, I just didn't get the first one on camera.
I applaud your song choice sir.
I do plan on getting one down the road.
They did buy it for me, but I paid it off back to them :) thank you!
thats cuz the stock one recirculates. which is technically already better than an atmospheric blow off. this way the ecu knows when to stop delivering fuel
It is a series 2, and I am running denso plugs
so there's an order of which the bolts should be tightened, just gotta hope she doesn't leak. Did you also use gasket glue on the half moon things?
Well I do plan on doing something about that manifold, ISIS has pretty good manifolds for the RB. As far as turbo I am not sure yet, kinda low on funds :/ But I would like to do a top mount of some sort :D
I dunno I don't really like using power tools much, I have them though.
I know, but I didn't have the paint. I will soon probably.
thats pretty nice man! continue living your dreams you're awsome man !
yup
Wrong order for removal and mounting on screws. The screws must still be tightened to the torque if they want the seal not to leak.
This is love.
ughh i love that engine bro ! i hate seeing her so dirty tho ! clean her up a bit n plz take good care of her ! keep the videos comeing.
Thank you sir!
I don't yet but I guess ill make one haha. I do have instagram though: vseredich
Hahaha at the thumbs up at the end and I got the exact same Hanes boxer too lol
Try to get ngk plugs though, I think they are bkr7e or something like that...
i have got to go outside. i just watched somebody replace a gasket
amazing vid as usual! by the way, what you are studying for ?
Hey valera! i'm a 15 year old boy that realy want to start drifting when i get older and i was wondering what cheap cars you could recomend, i was thinking somthing around a 328i. now i have a ford fiesta 96 with a 1.4 z-tech that i drive on some rally roads that my father owns, Love your channel bro!
-Huge fan.
u can upgrade to a t3t4 on your normal manifold with external wastegate :)
Where did you learn to drift at such a young age? Absolutely sick ride dude, wanna get an import at somepoint and create a project cat
Engine looks super clean inside. Your old SR did not look anything like that lol.
Also, you need power tools. Unbolting 35 10mm bolts by hand sucks. Also should have painted dem valve covers purple yo.
How much money did this car cost and how much money have you put into it because this car looks sick.
You should really get a side mount manifold :D
RB25 not the nicest looking motor, but damn do they sound good
I'm not 100% on this, as I don't follow his channel that closely but if I recall correctly he kinda had money raised or something like that, it wasn't just "fuck it"
I have an RB25 series 2 aswell. I wanted to know if you had any plans as far as turbo upgrades or changing that ugly intake manifold haha. I am too indecisive when it comes to what upgrades I want, Figured you might enlighten me with your goals. I would love to drift my RB also.
me too haha...whats with car guys going into computer related fields? A bunch car guys at my school are doing the same thing.
hks makes a idle controller i got it in my gc8 fixes the problem
Can't believe how many subscribers you have now, truly an inspiration of mine. Do you have a twitter? I would like to follow you.
hi. nice work you do there. congrets! can you tell me, is the S14 reliable for drifting? what about the parts?
I live in Europe and it's a bit more complicated with the japanese cars.
How much did it end up costing to replace the engine?
why are you using latex gloves to work on your car?
Your motor is an NEO like mine, did you use regular rb25 vavle cover gaskets? I've heard on forums the NEO uses different ones but i tried on my regular 25 ones and they seem to fit well.
thats not a neo..thats just a s2 rb25
Feint
:O you didnt clean the surfaces!!!!!!!!!! end of the world! XD
how much is Valve Cover Gaskets
hey valera what kind of blow off valve u got on ur rb
dude wat plugs are u running and is it a series 2 rb25?
Nice hands
are you running the stock bov and an aftermarket one also?
where did u find the ribber grommet that go on the screws??
Nissan part no: 13268-58S0A
Where can I get that socket wrench as seen @ minute 3:47? I really like the swivel head top and the extendable hand side option. Yes, I'm sorry for asking where do I get a porn star performance tool like that.
Available from Snap-On. It's pricey as far as ratchet handles go. Would you like the item number?
Dash Speed believe it or not, that is a Stanley brand 3/8'' telescoping flex head with lockout. I have one sitting in my 3/8 drawer right now. Best $17 I ever spent, they are a hell of a deal and I have had mine for a few years now. Part number is 7-85-782 but it seems they discontinued them
Like an hour
20
How much was your swap?
you should make some tutorials vids
Total work time?
Cybersecurity :)
>1 second ago
holy shit i was just looking throught your channel
what number ?
Thanks lol :)
Look on the forums like zlivia.net
Choices*. ;)
Hahaa Word!
Pretty it up. :p
You need a good job to pay for the parts. Know what I mean? lol
Hahaha
how does he afford to pay for this. I have a feeling its from good ol' daddy. No way he's a student that can afford an SR swap, blow that up, say "fuck it" and get an RB. Like its nothing. I have an SR swap and that took all the funds I had.
rawbrokerage com