That's gorgeous. At first, I wasn't able to visualize the color choices together. But after a few minutes, I realized just how complimentary they are. Really beautiful pattern. Thanks for a great tutorial. I never knew how to use these beads. ❤
good tutorial except i ran out of string with just a wing span and had to add more. when i got to the end i had a little trouble knotting which is probably on me not hearing or seeing properly. still not sure what happens to the end with the bead stop. i’m a beginner so i really need stuff broken down.
Hi there! Just measure around your wrist with any strand or string and decide how tight you like your bracelet, then you will know how long to make your bracelet. Just keep going until you reach a little bit shorter than the desired length so that you have room for your clasp. Good luck!
So you load up all the superduos to start then go through the second hole with the 15 on both sides? How many 11s to equal the number of 15s? How many feet of thread and beads to make a long wrap? I want the wrap to be a triple wrap bracelet/long necklace.
Hi Chris, thanks for watching! 11/0s are larger than 15/0s so you could try using one instead of two but I haven't tried it so I don't know if that will make the design a little wonky. It's best to try to use 15/0s. It's about a wingspan for a bracelet that goes around the wrist once so you'll need about three times that to get around the wrist three times. You'll need at least 3 tubes of superduos, possibly even 4 if you want to make the longer one. One tube of 15/0s will suffice. I hope that helps!
Thanks Chris! Glad you enjoyed it! You COULD leave a tail long enough but going through the bracelet is what gives the bracelet it's strength, which is why I did it that way. - Leah
I’m trying to do the longer one but I can’t seem to get the sizing correct. This is my 2nd try now so I figured with all the work this is, maybe I could just ask -please Miss Leah can you tell me how to measure this out for the longer wrap? Thanx
What length bracelet do you normally wear for a single strand design? For example, if you wear a 7.5" bracelet, multiply that by how many times you'd like it to wrap around your wrist. So 7.5 x 3, for example - which would mean stringing on enough beads for 22.5" and then adding an extra little bit for your clasp area, about an additional inch. That should get you closer to a better fitting final product! - Leah
A wingspan is the distance between your middle fingers when your arms are outstretched so it is different for everybody. It's not an exact measure but roughly equates to one's height. Hope that helps!
Lorene Dalsant I’m confused, how was I rude? I saw this video before and I liked it. I was just wondering why she had to re-post it. Did she get copyright strikes, was there a mistake in the video they had to correct, etc. What’s rude about that? Check yourself before leaving an “assumption” remark. Assuming makes an “ass” out of “u” and “me”.
EurekaCrystalBeads Ah! Thank you so much! I was wondering why it was removed because it is such a fab bracelet! Thank goodness you were able to put it back 🙌😊
That's gorgeous. At first, I wasn't able to visualize the color choices together. But after a few minutes, I realized just how complimentary they are. Really beautiful pattern. Thanks for a great tutorial. I never knew how to use these beads. ❤
Thank you so much for watching and leaving a comment!
So happy to see Leah's superduo bracelet back!
I still think this is a pretty little bracelet-thanks for sharing it with us.
What a fun beautiful pattern. Thank you for sharing. 🙋🏻♀️
Thank you for watching! 😊
I love super duo’s and I love snuggey wrap bracelets. Thank you 😊
Me too!!
It's back! Yay!! Happy to see this great tutorial back in action.
good tutorial except i ran out of string with just a wing span and had to add more. when i got to the end i had a little trouble knotting which is probably on me not hearing or seeing properly. still not sure what happens to the end with the bead stop. i’m a beginner so i really need stuff broken down.
Made couple different colors already double wrap. Simply and easy.
Yay! Glad you enjoyed this project!
What a cute little bracelet! I haven’t done that one yet. Thanks! I’ve got a couple Superduo mixes this will be perfect for! 💕
I absolutely love this bracelet..thank you so much..Its a beauty!
You’re welcome 😊
Absolutely beautiful........thank you so much for sharing sweetheart ❤️❤️
Thank you so much Sandi!
Lovely easy bracelet must try my main problem with bracelets is the measurement!
How is the best way to measure please
Hi there! Just measure around your wrist with any strand or string and decide how tight you like your bracelet, then you will know how long to make your bracelet. Just keep going until you reach a little bit shorter than the desired length so that you have room for your clasp. Good luck!
Lovely looks so easy need to try this thankyou
Beautiful.. i have some super duo's i could make this up with .. thank you for sharing ..
About how much thread would you need for a teiple wrap?
So you load up all the superduos to start then go through the second hole with the 15 on both sides? How many 11s to equal the number of 15s? How many feet of thread and beads to make a long wrap? I want the wrap to be a triple wrap bracelet/long necklace.
Hi Chris, thanks for watching! 11/0s are larger than 15/0s so you could try using one instead of two but I haven't tried it so I don't know if that will make the design a little wonky. It's best to try to use 15/0s. It's about a wingspan for a bracelet that goes around the wrist once so you'll need about three times that to get around the wrist three times. You'll need at least 3 tubes of superduos, possibly even 4 if you want to make the longer one. One tube of 15/0s will suffice. I hope that helps!
Love this video, can I leave a long enough tail thread to make the loop instead of going back through the bracelet from the button.
Thanks Chris! Glad you enjoyed it! You COULD leave a tail long enough but going through the bracelet is what gives the bracelet it's strength, which is why I did it that way. - Leah
Beautiful . How many superduos did you use for the long wrapped bracelet?
It's about 88 SuperDuos of each color.
Can you let me know how many superduos there are in both the single and the double wrapped bracelet please
Hi Linda, thanks for watching! It's about 27 superduos of each color in the short one and 88 of each in the long one.
EurekaCrystalBeads thanks so much ♥️
❤❤❤ Make sure you post what you end up making in our Beading Group! We love seeing all the variations! facebook.com/groups/319085948930672/
I’m trying to do the longer one but I can’t seem to get the sizing correct. This is my 2nd try now so I figured with all the work this is, maybe I could just ask -please Miss Leah can you tell me how to measure this out for the longer wrap? Thanx
What length bracelet do you normally wear for a single strand design? For example, if you wear a 7.5" bracelet, multiply that by how many times you'd like it to wrap around your wrist. So 7.5 x 3, for example - which would mean stringing on enough beads for 22.5" and then adding an extra little bit for your clasp area, about an additional inch. That should get you closer to a better fitting final product! - Leah
Thank you so much that’s exactly what I needed. Can’t wait for the next tutorial!
Hi, where did u get those bead trays? Love ur videos ❤️😍
Hi Crystal! We have them here: www.eurekacrystalbeads.com/beading-tools/
And they are actually on sale right now!
How many inches in a wingspan?
A wingspan is the distance between your middle fingers when your arms are outstretched so it is different for everybody. It's not an exact measure but roughly equates to one's height. Hope that helps!
Why was this re-posted?
Wow how rude !!
Lorene Dalsant
I’m confused, how was I rude? I saw this video before and I liked it. I was just wondering why she had to re-post it. Did she get copyright strikes, was there a mistake in the video they had to correct, etc. What’s rude about that? Check yourself before leaving an “assumption” remark. Assuming makes an “ass” out of “u” and “me”.
UA-cam removed it in error and we put it back because so many people wanted to see how to make this beautiful bracelet!
EurekaCrystalBeads
Ah! Thank you so much! I was wondering why it was removed because it is such a fab bracelet! Thank goodness you were able to put it back 🙌😊