I just got my trigger last Friday and installed same day. The sig platform is confusing but this video helped a lot. Got about 300 rounds in over the weekend. This thing absolutely slaps. Love it.
Loving my trigger so far! Installed it Christmas morning after a slight battle with the takedown lever I was able to get it reassembled and working flawlessly! Thanks Tyrant!
tough install...but this video helped a lot. I took it to the range over the weekend and it worked way better than the oem trigger. Thanks Tyrant crew.
I just purchased this trigger. The installation was a little bit cumbersome, I will not lie, but this is a world-class awesome trigger. It feels the very opposite of flimsy, it has some actual heft to it, it is exquisitely pretty, and the dingus safety definitively works. And further in terms of aesthetics, the option to have multiple colors for both the dingus and the shoe is pretty amazing. I now officially consider myself a trigger snob. I'm not sure how many of my guns with curved triggers will stay that way anymore if there are aftermarket options like this. Frankly, I resisted red dots for a long time until I finally tried one and then realized that it wasn't hype, just like quality flat triggers that are able to reduce travel and give you a definitive crisp break. That pretty much means that every gun I buy from now on will have to include the cost of an optic and a quality trigger like this. Oh well.
Just installed mine and it’s awesome but to those who can’t get it to work make sure your takedown pin is pushed back slightly then install the trigger bar under the trigger and push it back in and after make sure the linkage that goes to the takedown pin is in front of the slide release or when you go to put it back in it won’t work and you will be pulling your hair, There is a little sharp hump on that takedown bar that needs to be to the left of the slide release engagement sharp bump
I saw this reduces pre-travel by 30 percent. Due to the reduced pre-travel, does this keep the safety plunger in a slightly depressed state at all times due to safety lever pressing against it? (I’m not saying it disengages the plunger completely.) Im curious because the way the p365 is designed, it seems the more pre-travel that is taken out the more the safety lever presses against that safety plunger which stops the striker from hitting the primer of the bullet in unwanted situations. I was looking into buying one of these but the 30 percent reduction made me have some questions.
After installing the trigger I checked this next to another p365 and the plunger IS in a slightly depressed state with the tyrant trigger. It's less than a millimeter, but it is. I have no idea how much this affects safety, but @tyrantcnc needs to address this. Does it affect safety?
just to clarify, the safety plunger isn't affected by this reduction as the trigger itself has been manufactured to be a different angle which is closer to the wall than an oem trigger. Other methods of "forcing the pretravel" to be shorter WILL impact the safety plunger. (ie. tactical trigger p365 kit affects plunger as it uses a metal bracket that wedges in between the front of the trigger and the grip module, making the trigger always slightly pressed closer to the wall) This will affect the plunger to slightly rub the striker safety. I hope this answers your concern
I am highly considering this trigger. I just have a few concerns that I hope you could speak on? In my head, if I were to pick up the gun incorrectly or somehow fumble in my holster or something, I feel the finger will naturally take up a lot of the trigger, which presses the blade in, and the gun goes off. It seems like such a small window where you'd only contact that small bit of trigger that would stop it from going off. Maybe it could possibly prevent situations where it gets snagged? I don't know. Curious of your thoughts. Thanks!
The FCU’s can be a bit finicky. Try giving the trigger and takedown lever a bit of a wiggle. Also check that the bar for the takedown lever is sitting forward of the slide catch, and flush.
@@iflyjetss I ended up having to remove the trigger pin, trigger bar in order for the post the trigger bar hooked to to be clear of the takedown lever. It seems the post of the tyrant trigger is a bit too long preventing the takedown lever to seat completely into the FCU. Biggest pain in the 🫏
I'm having the same issue. The pistol in this video is not using the OEM takedown lever.The only way I've found to get the OEM takedown lever on with the new trigger is to remount the lever before you put the trigger pin in... the trigger pin was another issue in itself. With the OEM takedown lever in place and the FCU completely reassembled, the trigger cannot move completely forward to its resting position. That leaves the safety plunger lever partially engaged. That means you can't put the slide back on as the partially raised safety plunger lever hits the striker cover plate. I'm past the point of trusting the new trigger and plan on requesting a refund. It seems like a good idea that just needs some refinement.
@@grumpyowl3515 definitely reach out to customer service so that they can take care of you. The safety lever should not be interfering with your slide cover plate like you mentioned. Only other recommendation we can make for you to look at is to disassemble and reassemble to see if something did not seat properly the first time, which can happen.
Has anyone tried this with a magazine disconnect installed? It says it may not work but I am curious if it does. (No, I don’t not live in California, but I have family that does), (yes, I have told them to move out)
I just installed this on a Wilson combat grip and I don’t have to engage the blade for it to fire. Is that normal???? Thought it was for extra safety. Are the blades adjustable???
I just got my trigger last Friday and installed same day. The sig platform is confusing but this video helped a lot. Got about 300 rounds in over the weekend. This thing absolutely slaps. Love it.
Perfect timing! I just got mine in the mail this morning. Thanks for the installation instructions.
Loving my trigger so far! Installed it Christmas morning after a slight battle with the takedown lever I was able to get it reassembled and working flawlessly! Thanks Tyrant!
tough install...but this video helped a lot. I took it to the range over the weekend and it worked way better than the oem trigger. Thanks Tyrant crew.
Why not just have the screws with loctite already on them? If it’s the first thing you do, don’t understand why the consumer has to do it 🤷♂️
I just purchased this trigger. The installation was a little bit cumbersome, I will not lie, but this is a world-class awesome trigger.
It feels the very opposite of flimsy, it has some actual heft to it, it is exquisitely pretty, and the dingus safety definitively works.
And further in terms of aesthetics, the option to have multiple colors for both the dingus and the shoe is pretty amazing.
I now officially consider myself a trigger snob. I'm not sure how many of my guns with curved triggers will stay that way anymore if there are aftermarket options like this.
Frankly, I resisted red dots for a long time until I finally tried one and then realized that it wasn't hype, just like quality flat triggers that are able to reduce travel and give you a definitive crisp break.
That pretty much means that every gun I buy from now on will have to include the cost of an optic and a quality trigger like this. Oh well.
Just got mine today....going to install tomorrow....great timing on the install video. :)
So easy to install. It’s amazing what a well designed trigger can do.
Got mine installed over the weekend....super smooth action and feels great so far, thanks for the walkthrough!
The trigger is gorgeous and pulls through so damned smooth. No issues so far!
And thank you for the install vid. G-d knows I needed it 😂
Love mine, just ran it zero issues
His install guide works . Very easy .
Super easy to understand guide, putting mine together this weekend
Just installed mine and it’s awesome but to those who can’t get it to work make sure your takedown pin is pushed back slightly then install the trigger bar under the trigger and push it back in and after make sure the linkage that goes to the takedown pin is in front of the slide release or when you go to put it back in it won’t work and you will be pulling your hair, There is a little sharp hump on that takedown bar that needs to be to the left of the slide release engagement sharp bump
I saw this reduces pre-travel by 30 percent. Due to the reduced pre-travel, does this keep the safety plunger in a slightly depressed state at all times due to safety lever pressing against it? (I’m not saying it disengages the plunger completely.) Im curious because the way the p365 is designed, it seems the more pre-travel that is taken out the more the safety lever presses against that safety plunger which stops the striker from hitting the primer of the bullet in unwanted situations. I was looking into buying one of these but the 30 percent reduction made me have some questions.
After installing the trigger I checked this next to another p365 and the plunger IS in a slightly depressed state with the tyrant trigger. It's less than a millimeter, but it is. I have no idea how much this affects safety, but @tyrantcnc needs to address this. Does it affect safety?
I'm surprised Tyrant hasn't responded to this at all. They should be a bit more active in checking out valid questions in their videos.
Came here to see if the video answered this question but I'm left with the same question you have...
just to clarify, the safety plunger isn't affected by this reduction as the trigger itself has been manufactured to be a different angle which is closer to the wall than an oem trigger. Other methods of "forcing the pretravel" to be shorter WILL impact the safety plunger. (ie. tactical trigger p365 kit affects plunger as it uses a metal bracket that wedges in between the front of the trigger and the grip module, making the trigger always slightly pressed closer to the wall) This will affect the plunger to slightly rub the striker safety. I hope this answers your concern
How is this question going unanswered...?
solid install guide, it really helped, awesome product. I highly recommend!
I got it, installed it, works very well
Super easy to install. Installed mine yesterday
I am highly considering this trigger. I just have a few concerns that I hope you could speak on?
In my head, if I were to pick up the gun incorrectly or somehow fumble in my holster or something, I feel the finger will naturally take up a lot of the trigger, which presses the blade in, and the gun goes off.
It seems like such a small window where you'd only contact that small bit of trigger that would stop it from going off. Maybe it could possibly prevent situations where it gets snagged?
I don't know. Curious of your thoughts.
Thanks!
Dynamite!
Is there a difference in a process when installing on FCU with a manual safety?
I will have try them out … do they offer Veteran/Military discount in their products ? 👍🏼🥃🇺🇸
this is good for the 365XL too right? Thanks. great vid.
🤦🏽♂️ I lost one of the trigger blade screws, I know, my fault, can I order it form you guys? Man I do love this trigger.
Definitely! Get in touch at info@tyrantcnc.com and we'll get you set up.
When will these be back in stock?
When will they be back in stock?
I can’t get the takedown lever to go all the way back in so that the groove on the takedown lever rides on the FCU
The FCU’s can be a bit finicky. Try giving the trigger and takedown lever a bit of a wiggle. Also check that the bar for the takedown lever is sitting forward of the slide catch, and flush.
@@iflyjetss I ended up having to remove the trigger pin, trigger bar in order for the post the trigger bar hooked to to be clear of the takedown lever. It seems the post of the tyrant trigger is a bit too long preventing the takedown lever to seat completely into the FCU. Biggest pain in the 🫏
I'm having the same issue. The pistol in this video is not using the OEM takedown lever.The only way I've found to get the OEM takedown lever on with the new trigger is to remount the lever before you put the trigger pin in... the trigger pin was another issue in itself. With the OEM takedown lever in place and the FCU completely reassembled, the trigger cannot move completely forward to its resting position. That leaves the safety plunger lever partially engaged. That means you can't put the slide back on as the partially raised safety plunger lever hits the striker cover plate. I'm past the point of trusting the new trigger and plan on requesting a refund. It seems like a good idea that just needs some refinement.
@@grumpyowl3515 definitely reach out to customer service so that they can take care of you. The safety lever should not be interfering with your slide cover plate like you mentioned. Only other recommendation we can make for you to look at is to disassemble and reassemble to see if something did not seat properly the first time, which can happen.
@@TactiCali27 you should be able to rotate it around and push it in, let’s know
Any ETA for when these will be back in stock?
I took the liitle screws out of the trigger to get the safety off and a little spring came out just dont know where to put it. Any help?
I found the little whole that it drops in nvm
Why would you need it? Any upgrade benefits to it?
Extra safety
Has anyone tried this with a magazine disconnect installed? It says it may not work but I am curious if it does. (No, I don’t not live in California, but I have family that does), (yes, I have told them to move out)
It won't work with the magazine disconnect still installed.
Thank you!
Anyone else's gray insert look purple?
like Glock trigger is safer than the original P365 trigger.
I just installed this on a Wilson combat grip and I don’t have to engage the blade for it to fire. Is that normal???? Thought it was for extra safety. Are the blades adjustable???
Does the pin have a nipple at the end?