My best flying 3" quad runs BrotherHobby 1504.5 / 3950KV motors on 4S with 3x3x3 props. I've tried about 10 motor variations now and this one is just nails it. Maybe underpowered though if you do want to run it with 3.5" props.... Hey - I checked out some of your oldest videos the other day. You been playing with these things a long time! Cheers and HNY.
Yeah I've been flying since 2015... I'm an old fogey:-). Used to love the brother hobby brand motors in my early days... They were great and super durable
Happy New Year Mr Abshire! Not sure about your current set up/firmware...but I think ELRS would be a good choice. Heard lots of good about it and I'm gonna start gradually switching to it too on my planes.
Nice another 3" pilot 😃, good luck on the motor hunt, ive been having bad run on surviving the beating i guve them. The antenna breaking sucks i Tucked mine in the back to prevent it.
Yeah it seems so many are trying to save weight and give us the t-style mounts which I think are terrible. I've found a few that have the 5mm mount. Just have to find some that are a bit more durable
Tightening up the twist and adding a mount to separate the rx from the fc a little bit... Flew a couple packs this morning and it was ok. I went ahead and ordered a module for ELRS and a RX for it. I figured it was time to make the switch. It's be a "fun" time with upgrading the radio firmware as well.
Happy new year Stacey. 😎 Nice spot to fly. I fly Kiss Ultra, Turtle mode works very well for me. Don't know that it's any better than betaflight. 🤔 I run RCinPower 1507 3800kv Smoox motors. The base is 2mm thick, not so sure that would hold up any better. Happy flying everyone. 🤓
I hear you bro I got two quads two of each of the two frames I thought daily QuadMula and VannyPro's And right now I've got both of Vanny pros down and one of the QuadMula down I've only got one in the air right now lol
Stace geezer, i really hope you like my next video, its my noob explanation of fpv flow, and guess what? Your video of "WHAT FPV STYLE IS THIS " IS THE STAR EXPLANATION AND THEN MY SIM OF THE SAME KINDA ROCKING HORSE REWIND FLIP ROLL ,WILL SEND YOU THE LINK, I SAY ITS YOU, I PUT YOUR NAME !❤
@@StacemanFPV well done mate! Just use the speedybee apk its so simple ,250hz for your flying, telemetry i set 1/32 for non crucial gps etc and just set your mw to dynamic, max and fan fresh in your hot state on 50mws, and thats it. Flash buy wifi, so easy, ive always stuck with matek, and radiomaster and hmodel tx pro 2.4ghz , now replaced with the nomad! Good luck, its so easy, youl smash it!
@StacemanFPV foxeer makes them, I've never had a motor where the magnet feels as strong as these ones. Also Chris rosser said they performed best in one of his videos for 3in motors.
2025 is a FPV wing and plane year for me, just got into it and loving it!!!!!
That goes well with the long range stuff you had been getting into.
Happy New Year dude! Great to see a new video from you. 🤘
Thanks for all the support brother
my SpeedyBee 35 is super fun, I bet thing is a blast to rip packs on!
Happy New Year! Subbed!
Yep! I love it!
My best flying 3" quad runs BrotherHobby 1504.5 / 3950KV motors on 4S with 3x3x3 props. I've tried about 10 motor variations now and this one is just nails it. Maybe underpowered though if you do want to run it with 3.5" props.... Hey - I checked out some of your oldest videos the other day. You been playing with these things a long time! Cheers and HNY.
Yeah I've been flying since 2015... I'm an old fogey:-). Used to love the brother hobby brand motors in my early days... They were great and super durable
You got a new subscriber and fellow FPV pilot!
Thanks for subscribing!
ELRS FTW!!!! You won't regret
So I've heard.
Happy new year bud great flying 👍👍👍
Thanks brother! Happy new Year!
happy new year Stacey!
Happy new Year!!!
Wait someone is flying freestyle on O3? This must be fake, right?
LOL
Happy New Year Brother 💪🏻
Happy new Year!
you are shreddin that lil beast
damn looks like 5" footy to be honest its crazy
Yeah it feels a lot like the 5... Just a bit less power
Happy New Year Mr Abshire! Not sure about your current set up/firmware...but I think ELRS would be a good choice. Heard lots of good about it and I'm gonna start gradually switching to it too on my planes.
Yeah I've heard the same. I ordered a module and a rx so well see how it goes
Nice another 3" pilot 😃, good luck on the motor hunt, ive been having bad run on surviving the beating i guve them. The antenna breaking sucks i Tucked mine in the back to prevent it.
Yeah it seems so many are trying to save weight and give us the t-style mounts which I think are terrible. I've found a few that have the 5mm mount. Just have to find some that are a bit more durable
failsafe may just be a damaged antennae or twist the signal wires to avoid interference
Yeah, antenna looks good... might try twisting the wires though
@@StacemanFPV pm sent
Tightening up the twist and adding a mount to separate the rx from the fc a little bit... Flew a couple packs this morning and it was ok. I went ahead and ordered a module for ELRS and a RX for it. I figured it was time to make the switch. It's be a "fun" time with upgrading the radio firmware as well.
Happy new year, diatone motors are amazing, wire protectors and stay cool
I'll have to check that out
i fly tmotor f20s on 3 in, 2011 3750kv, weighs 245g with a 880 gnb. I love those motors
That's pretty lightweight
Happy new year Stacey. 😎
Nice spot to fly. I fly Kiss Ultra, Turtle mode works very well for me. Don't know that it's any better than betaflight. 🤔
I run RCinPower 1507 3800kv Smoox motors. The base is 2mm thick, not so sure that would hold up any better.
Happy flying everyone. 🤓
That would be slightly thicker than the EMax... Little better on durability depending on material
Are those motors notchy or pretty smooth when you spin them?
@@StacemanFPV very notchy when you spin by hand. Flying, they feel great to me.
Try a 2004 motor 3000kv lower profile will not be susepticle to breakage, i use tge flyfish flash on my aos 3.5"
Funny you should mention that...I was thinking about that size actually
@@StacemanFPV in AA, will talk about motor 2004 later❤️🙏
Take care brother!
@@StacemanFPV ❤️
Haven't had luck with fettech alpha it wigged out . I just run OG KISS
Yeah I wanted to like it... But it just didn't work
I hear you bro I got two quads two of each of the two frames I thought daily QuadMula and VannyPro's And right now I've got both of Vanny pros down and one of the QuadMula down I've only got one in the air right now lol
Yeah I used to try to keep a couple going but it quickly becomes tricky for me lol
Stace geezer, i really hope you like my next video, its my noob explanation of fpv flow, and guess what?
Your video of "WHAT FPV STYLE IS THIS " IS THE STAR EXPLANATION AND THEN MY SIM OF THE SAME KINDA ROCKING HORSE REWIND FLIP ROLL ,WILL SEND YOU THE LINK, I SAY ITS YOU, I PUT YOUR NAME !❤
Looking forward to seeing it
@StacemanFPV thanks man, its up
ua-cam.com/video/nV6zCZUgX9I/v-deo.htmlsi=c55_yQdRMn26Vpz7
I've got in my watch later for today
@@StacemanFPV cool
Elrs is simple made complicated by us complicated people haha😂😂
NO, IT REALLY IS SIMPLE!
Yeah I've heard it's simple once you get it
Elrs is the way to go!!!
Well I pulled the trigger and ordered a module for my radio and receiver.
@@StacemanFPV well done mate! Just use the speedybee apk its so simple ,250hz for your flying, telemetry i set 1/32 for non crucial gps etc and just set your mw to dynamic, max and fan fresh in your hot state on 50mws, and thats it.
Flash buy wifi, so easy, ive always stuck with matek, and radiomaster and hmodel tx pro 2.4ghz , now replaced with the nomad!
Good luck, its so easy, youl smash it!
Hopefully so. I'll be hitting you up if I run into issues
Ive got a set of daturas on my 3.5 and they are the best ive had.
I don't think I've heard of those
@StacemanFPV foxeer makes them, I've never had a motor where the magnet feels as strong as these ones. Also Chris rosser said they performed best in one of his videos for 3in motors.
I had a set of flat rats but my third crash 2 motors went out.
I'll have to check on those
I'll check them out
I got some 1507 6s they rip
Which ones?
Enjoyed this video. Sent an email...I think we're neighbors!
Hey brother! I got it and replied.
🤘🖐🖐🖐🖐
Thanks brother! Happy new Year!
@StacemanFPV ✌️✌️