@Anastasi In Tech - What about using i-squared-l logic and/or vacuum channel FETs, possibly on chiplets? I2L seemed very promising when first introduced, but it's power consumption was high since transistors were all large at that time. As a bipolar technology it will not suffer from gate leakage problems. Are there any other reasons why it might not work? As for "vacuum" channel FETs, they are 10 times faster or more, partly because they use free electrons. They also benefit from nanoscale features, are extremely radiation resistant, and they can operate comfortably at temperatures up to hundreds of degrees Celsius. Also they don't actually require vacuum when built at small nanoscales.
@@fluiditynz - I left my comments and questioon here because it is the most likely place for her to see it. Nothing to do with the laptop she's promoting.
When I first started programming, and RAM was off chip and typically a few KB, we'd spend a lot of dev time working out how to do as much as possible in as little RAM as possible and as few clock cycles as possible. These days the demands to cut development time and get new features out, more driven by senior management and Product Owners than by real customer demand, seems to have ditched those ideas. If it's too slow the customer is expected to just buy a higher spec machine and new developers are taught ways to shorten development time but not execution time. I think that this is a false economy. About 10 years ago I was able to shorten a big data-processing job from 3 days to under 20 minutes, on the same hardware, by applying the techniques I'd learned back in the 1980s to key functions. It took me 5 days, but when this is something that has to be run every week the saving soon stacks up
You are absolutely right. Once I participated in a service job to get a power station running. The problem was to bring the gas engines up and running as fast as possible. After a few days the programmer had been flown in and looked for alternative assembler commands to save a clock cycle here and a clock cycle there.😁
Wirth's Corollary to Moore's Law: Any improvement in Hardware performance will be negated by code bloat at an equivalent rate. Kinda like traffic in London.
It's not a false economy, just a different emphasize due to the change in price structure. In the old days, memory were expensive, so we tried to economize its use. Today's memory are so cheap, that software developing time has become the most expensive part of a system.
@@gorilladisco9108 the cost of memory is largely immaterial. It’s the cost of execution time. Say you’ve got a transaction that currently takes 10 minutes to complete but if the code was optimised would take 7 minutes. To optimise the code would take the developer an extra 5 days effort and the developer earns £30 an hour (that’s the mid-point for a developer where I work), so that’s about £1100 wage cost but once it’s done that cost is done. Once rolled out the application is used by 200 people paid £16 an hour (I have some specific applications we use in mind here). Saving 3 minutes per transaction means either those same staff can process 30% more transactions or we can lose 60 staff at a saving of just over £7000 a day. That extra development time would repay in a little over an hour on the first day and after that would be pure cost saving.
You really have a knack for making complex topics engaging and easy to follow for everyone! Breaking down the challenges of SRAM and introducing phase change memory in such a clear manner is no small feat. Excited for more content like this!
The point "good endurance 2*10^8 cycles" prohibits its use for cache memory. But it's really a viable and competitive option as a replacement for Flash memory!
The problem with chiplet design is heat management. Since every layer is active, it burns energy and produces heat, and this isn't good. A secondary problem is the bus interconnect because stacking requires shared lanes, so memory layers are in parallel, making the bus interconnect a bottleneck. Last but not least is signal strength and propagation time: stacking layers requires precise alignment and add electron jumping around, so there's a potential limiting factor in electron propagation, noise and eventual errors. This isn't much of a problem if the system is built around it, but it still is a limiting factor. There are solutions: since there's one master and multiple slaves there's no risk of collisions and so you can make a lot of assumptions on the drawing board... but busses are going to become wider and more complex, and that will add latency where you don't want it. My 2 cents.
- I wonder if they run veins of metal in between the layers to send the heat to radiator. - They put L3 cache on the second layer, which by virtue is quite removed from the logic circuits.
I'd be curious about the thermodynamic side effects of phase change memory during transitions as the crystallisation would release heat while amorphization would be cooling
Thanks. Amazing video. It's kind of interesting how it always comes down to the same principles. First shrinking the size in 2D, then layering stuff, and eventually going into the 3rd dimension. And when that reaches its limits, then change the packaging and invent some hybrid setup. Next, change the materials and go nano or use light etc. instead. Even the success criteria are usually similar: energy consumption, speed or latency, size and area, cost of production, reliability and defect rate, and the integration with the existing ecosystem.
It's quite bizarre that you thought the PCM memory is a future replacement of SRAM, as the it has a switching speed of 40ns (on par with DRAM), according to the paper you cited. This is an order of magnitude slower than SRAM. The current only viable option to replace SRAM is SOT-MRAM, which TSMC is working on. Go research SOT-MRAM😁
It also involves a physical change to the medium, which means wear and limited number of writes. I believe a similar principle has been around since at least the 90s. I used to have a CD-R/W type device that used a laser to heat up spots of a special metallic medium, changing it from smooth to amorphous. Could be rewritten some number of times. I will say though, your point is probably good and valid, but could have been made more constructively.
This is true. PCM is totally useless as SRAM replacement and doesn’t have sufficient speed or rewrite resilience. Honestly, she really failed to understand its use case. It’s a great alternative to floating-gate FLASH memory, not SRAM!
The words "dynamic" and "static" are a reference to the powering method between state changes. You kind of hinted at this with the TTL logic diagram, but didn't expand. Static is faster because it doesn't have to wait for the re-fresh cycles before it can change state. Static also runs hotter and consumes more power- there are no free lunches ;-)
Not exactly. DRAM consumes power all the time, because it needs constant refresh to preserve contents. SRAM only consumes power during state change. Both consume some leakage current though, and with that, SRAM consumes more due to having more transistors per bit cell. DRAM also consumes considerable current to change state, because of its larger gate capacitance. Overall, DRAM tends to consume more power per bit but costs less and is more compact, which is why we use it for main memory and reserve SRAM for cache and internal registers.
Interesting idea, but very speculative and in need of a demonstration at scale to assess its practicality. Moreover, although a 23% decrease in area is good for an existing bottle neck, it is not revolutionary, that would need a factor of at least 10. At the current estimated level of improvement it becomes a commercial decision on whether this improvement has a fast enough pay back to justify the r&d costs to make it practical. Is anyone making the investment to commercialize this discovery? Thank you for sharing!
Not really, the silicon lattice constant is only 0.7 nanometers. We can't scale in silicon below that. Germanium has a lattice constant of about 0.5. While process nodes and technology are mostly marketing terms and there is room for improvement beyond "1 nanometer process" - we are about at the end of what we can achieve with existing semiconductor paradigms. It will be almost all architecture and material sciences by 2030. We can't get much smaller. A 20% improvement over SRAM is disruptive even if it doesn't scale any smaller. SRAM is unable to be scaled any smaller due to the physics underwriting operation. We only have a few more die shrinks left before we are up against the size of the atom. ... Again, sort of ... A 1 nanometer node doesn't necessarily mean that you can make a grid of 1 nanometer square pads separated by 1 nanometer troughs on all sides, or vice-versa. But as I mentioned, the lattice constant of silicon is 0.7 nanometers, their latest process node is 1.4 nanometers. You can't really cleave off half a crystalline arrangement without having weird things happen, the next die shrink, if it is possible, would come at 0.7 nanometers. We would be, assuming we can make the grid arrangement described, making the smallest transistors possible with silicon, using existing paradigms.... And whatever paradigm comes next would need to use atoms much more efficiently - or some other concepts entirely - to function. On the plus side, it means that in about another 10 years, we might see computers built with the idea they could last decades in their application.
@@Aim54Delta Great points! Thank you for expanding on the technological limits of the underlying physics not covered in the video. Given these fundamental limits to silicon, research efforts will move to entirely different concepts that may or may not work. Perhaps we will not see much further progress ending the decades long run of ever increasing chip performance or something new will make current silicon architectures obsolete. Fascinating field with huge commercial risk/rewards for company boards to ponder. Thank you for your comments.
I worked on micron/intels PCM, optane, for a few years. While we were making peogress on some of the problems you mentioned, the venture ultimately failed due to the economics of producing the chips as well as a lack of customers. Would be cool to see it make a comeback in the future
I thank you for your service. When intel announced that they were ending optane, I bought 6 of those PCIE drives; I caught a fire sale. Those drives are the fastest drives I have for doing some disk intensive Studio work. I wish they could've gotten the price down around $100-$200 dollars for the good stuff. I actually got 6 optanes for $45 a piece. I lucked up and bought a box.
Very interesting. Thanks for sharing your expertise. There is always something interesting in your videos. At least in the three or four i have seen so far.😊
Nice idea. Very similar to Nantero NRAM that also uses Van der Walls effect to provide resistive cells using carbon nanotubes for SSD/DRAM universal memory. I've been waiting for NRAM for 20 years, and it is only now beginning to make it's way into the data centre. Let's hope that this technology takes less time to mature.
Thank you for your presentation. I found it fascinating. The phase change memory, amorphous crystal back to uniform array crystal seems like the mental models used to explain demagnetization around the currie point.
This is not a solution to the SRAM problem, even the authors of the paper state "his work provides key materials and engineering insights towards the design and optimization of energy-efficient PCM, and could inspire the industry-scale adoption of nanoscale superlattice phase-change materials for low-power and high-density storage." The report states that they have a nice cell size of 45 nm, but a switching time of 40ns and endurance of 2 x 10^8 cycles (SRAM is around 10^15). So this is a possible replacement for Flash memory not SRAM. As a side note, the use of any heat based phase change storage solution on or near the CPU die would result in some very interesting performance issues as the heat output of the CPU would be impacted by the number of true values held within the cache storage and the frequency the cache is rewritten.
Loved the graph you put together with the memory pyramid (access time vs where is used, with volatility information)!! P.S. Your accent also becomes more and more easy to understand!
I believe that down the line we would need to use another processor architecture than the Von Neumann one that we use today (i.e. having logic and memory separated), an architecture that instead has an "on memory compute" design, or perhaps a mix of them. In the end the speed of light makes it hard to compute over longer distances (i.e. CM or even MM) specially when the frequency goes up and the data becomes even larger.
OK I’m calling this out as not feasible in lots of cases. The issue is that SRAM needs to be tightly coupled into an architecture to get the performance benefit. However if a bond-out pad is required (eg chiplet etc) via Bunch Of Wires interface then there will be a delay penalty due to capacitance and transmission line issues. This means added latency and a performance hit. Might be useful for L2 cache but anything local it is of no use. SRAM at the local level is still the best solution.
3 nm and so on is a marketing term that has no relation to any dimension of the transistors anymore. The true gate width until now is 14 nm due to asml's lithography machines limitation. The next step for the next decade is going down to 8nm (about 80 atoms wide).
My concern with the phase change memory is just the lifetime and reliability. Do the cells grow oxides or change chemistry over time? Can they be ruined by ripple or electrical noise at scale that hasn't been discovered yet? Etc. Love your videos!
I remember hearing about the SRAM scalling issue some time before the Zen4 release, but then haven't heard anything even though I kept hearing about shinking nodes. Been curious what was coming of that. I was thinking that since it's not benefiting from the scaling, if it may have been counterproductive regarding degradation etc. I wonder if that is what is happening with the Intel 13 and 14K skus? I guess we will find out soon enough. Thanks for the update, I'm glad they are on top of it!
It has been discussed for decades that close stacking of chips has advantages of speed and size. The issue is heat generation, thus trying to reduce the total charge (electron count per bit). New memory technology is required with far smaller charge transfered per operation.
Paul Schnitzlein taught me how to design static RAM cells. This video speaks to me. Yes the set/clear, and sense amps are all in balance. It is an analogish type circuit that can burn a lot of power when being read.
So each of the 2 phases of the PCM has a different resistance, so the computer can tell 1 from 0? Can PCM memory be integrated in the same chip as the processor core? Seems like it requires a unique material to be added on a chip
As always fantastic work. I am not so enthusiastic right now with the new technology an endurance of 2E8 is amazing for something like storage, but the computer will go over that in no time for the cache. Even a microprocessor that is not super scalar and runs on the ghz range will be accessing memory in the other of 10^9 per second. Clearly, that access is per cell, and not for the full memory but they need to improve that number a lot.
Thank you for this video. It's great. My two issues: (1) heat dissipation, is not addressed (over cycles there is growth of H.A.Z.), (2) One thing I heard about and remember vaguely, was an attempt at self healing logics (rather, materials + control circuitry), which is aimed at reducing the need for redundancy, in elements at the core of the chip (hottest and fastest environment), and attempts to also better the chip lifetime (cycles 'til dead). -I would be grateful if you could address both.
I worry about using non-volatile memory for primary or cache memory because of the security aspect. If the information remains after power is interrupted, quite a few "secrets" will be in clear text, and the determined and well equipped "bad actor" will be able to extract surprising amounts of information from a system. My industry has to issue letters of volatility with everything we produce, and for anything with NVM, the sanitization procedure usually involves removing the part with non-volatile storage and destroying it. The only exception is when it can be proven that the hardware is incapable of writing to that NVM from any component present on the assembly, even if malicious or maintenance software is loaded onto the device. This phase change memory built in the same package as the CPU logic could not be provably zeroized without some sort of non-bypassible hold up power, and that would increase the cost and size of the chip package. I think this is very promising for secondary addressable storage, but I don't see it replacing main memory in most applications.
Great stuff. As someone who built their own desktops through computer conventions in the 90s I appreciate you bringing me up to date on where we stand now in personal computer development😊
14:05 Anastasi: 0.16 micro m² 🤔 Subtitles: 0.016 micro m²🤓 I think you you should pronounce every number after decimals one by one rather than calling them at once
Thanks for the updates, really informative... I was working on OTP memory designs and this new time of glass memory is looking similar to the concept of OTP memory, may be we can see this kind of evolution in OTP memories side also.
Non-volatile and low-latency at the same time, coupled with scalability and hopefully cost-effectiveness in manufacturing, would be a huge technological leap. Thank you for the information.
Xilinx's (now AMD) HBM products were combining FPGAs with DRAM chiplets on a silicon interconnect substrate back in 2018. Altera released similar tech a year later.
What about keeping the heat down. Sure lower power required in some case but stacking should also increase the requirement for improved cooling perhaps?
It should be mentioned that process node sizes like N3 or N5 nodes are density measurements and not actually a transistor size. Intel 10nm was equivalent to TSMC 7nm as they average over different area sizes and utilize different shapes and can't be compared directly or even with the size of a silicon atom which is only 0.1 nm in "size".
what really excites me about this new PCM technology is it's analogue compatibility. i really think APUs will catch on within the next 10 years or so. and this type of RAM is perfect for that application
@Anastasi - you might want to re-post this video taking Intel Optane memory into account. It's a non-volatile PCM memory that's been out for years, and even used as DRAM. As another comment mentioned, it failed due to the expensive manufacturing of the chips and the market simply wasn't there mostly due to fierce competition from flash memory.
optane's real problem was it being place in 2 places where it didn't belong, one was a flash competitor which placed it in a much too slow interface, another was in DIMM competing with much faster Dram chips, if we make a dedicated space for it optane could really bring some benefit but we need to do it the right way.
I believe that the problem of quantum tunneling limitations to size can be addressed by temperature as well as ionic state. This implies that mechanical cooling is a requirement which is expensive and inefficient.
One of the chief benefits I can see in going to optical computing is the ability to have associative addressing through polarization and muliple concurrent optical reading/writing heads for raid like processing.
Yes, though theres more limitations, it's really hard to manage heat in a 3d structure. It also requires new innovative ways to do it. This is why a room temperature super conductor would be such an amazing breakthrough. You wouldn't need to worry about heat management and you could up the frequency to Thz levels while maintaining manageability even in a 3d transistor structure. Computing would be millions and billions and even trillions of times faster
Interestingly, computing is still based upon an electron pump system when the Spherical Photon Well combines logic and data storage in one system that moves at the speed of light.
A nonvolatile cache memory creates exciting new ways that processor microcode that can be infected with impossible to trace privacy stealing back doors.
3d stacking was the innovation that allowed more memory on the chip, not chiplets. Chiplets were a great innovation, but they were not what you wanted to discuss here. You also didn't explain the downsides to 3d stacking (memory layer holds in some of the chip's heat, so they need to limit their power somewhat). 3d streaming has been something they've wanted to do for decades, but only now were they able to make the chips efficient enough to make it worthwhile.
AFAIK, PCM itself is a fairly old idea and many companies (e.g. Samsung, Micron, Western Digital, IBM) have experimented with it and even made products using PCM. This new advance just makes PCM more competitive at the time when SRAM is struggling to keep meeting the needs of the industry. So it is a big deal, just not a completely new big deal ;)
Great video - thank you Anastasi :-) I think if we stack much more memory as 3rd level cache chiplets on top of CPUs we may reach the size of gigabyte 3rd level cache. And this would eliminate the external DIMMs on the mainboard which makes future Notebooks and PC again cheaper and reduces not just the complexity of the mainboard but also of the operating system, drivers and firmware because data can be loaded directly via fast PCIe lanes connected SSDs to 3rd level cache.
But it has one significant problem: a large amount of energy is always released during the phase transformation. This technology addresses the issue of overheating, which needs to be resolved
Check out New ASUS Vivobook S 15: asus.click/vbs_anastasi
Please explain why we don't have quantum computers with Ning Li's room temperature superconductor?
@Anastasi In Tech - What about using i-squared-l logic and/or vacuum channel FETs, possibly on chiplets? I2L seemed very promising when first introduced, but it's power consumption was high since transistors were all large at that time. As a bipolar technology it will not suffer from gate leakage problems. Are there any other reasons why it might not work? As for "vacuum" channel FETs, they are 10 times faster or more, partly because they use free electrons. They also benefit from nanoscale features, are extremely radiation resistant, and they can operate comfortably at temperatures up to hundreds of degrees Celsius. Also they don't actually require vacuum when built at small nanoscales.
@@YodaWhat This is about Anastasi's Asus Vivobook commercial she boldly snuck into her main content?
@@fluiditynz - I left my comments and questioon here because it is the most likely place for her to see it. Nothing to do with the laptop she's promoting.
xoxooxoxoxooxox
When I first started programming, and RAM was off chip and typically a few KB, we'd spend a lot of dev time working out how to do as much as possible in as little RAM as possible and as few clock cycles as possible. These days the demands to cut development time and get new features out, more driven by senior management and Product Owners than by real customer demand, seems to have ditched those ideas. If it's too slow the customer is expected to just buy a higher spec machine and new developers are taught ways to shorten development time but not execution time. I think that this is a false economy. About 10 years ago I was able to shorten a big data-processing job from 3 days to under 20 minutes, on the same hardware, by applying the techniques I'd learned back in the 1980s to key functions. It took me 5 days, but when this is something that has to be run every week the saving soon stacks up
You are absolutely right. Once I participated in a service job to get a power station running. The problem was to bring the gas engines up and running as fast as possible. After a few days the programmer had been flown in and looked for alternative assembler commands to save a clock cycle here and a clock cycle there.😁
Wirth's Corollary to Moore's Law:
Any improvement in Hardware performance will be negated by code bloat at an equivalent rate.
Kinda like traffic in London.
It's not a false economy, just a different emphasize due to the change in price structure.
In the old days, memory were expensive, so we tried to economize its use. Today's memory are so cheap, that software developing time has become the most expensive part of a system.
@@gorilladisco9108 the cost of memory is largely immaterial. It’s the cost of execution time. Say you’ve got a transaction that currently takes 10 minutes to complete but if the code was optimised would take 7 minutes. To optimise the code would take the developer an extra 5 days effort and the developer earns £30 an hour (that’s the mid-point for a developer where I work), so that’s about £1100 wage cost but once it’s done that cost is done. Once rolled out the application is used by 200 people paid £16 an hour (I have some specific applications we use in mind here). Saving 3 minutes per transaction means either those same staff can process 30% more transactions or we can lose 60 staff at a saving of just over £7000 a day. That extra development time would repay in a little over an hour on the first day and after that would be pure cost saving.
NO COPILOT! NO RECALL! This future is PRISONPLANET!
You really have a knack for making complex topics engaging and easy to follow for everyone! Breaking down the challenges of SRAM and introducing phase change memory in such a clear manner is no small feat. Excited for more content like this!
👍🏽💚🌴☀️🌏
Has datsbus ended?
@@Raphy_Afk 😂😅no..my English is bad🐪☀️
@Magastz love💚and peace 🌏
Not bad on the eyes either
Science communicators who actually are professionals in their field are allways welcome. Thank you Anastasi
I didn't even know she was from the field, I thought she was just smart. But I guess that makes sense
The point "good endurance 2*10^8 cycles" prohibits its use for cache memory. But it's really a viable and competitive option as a replacement for Flash memory!
The problem with chiplet design is heat management.
Since every layer is active, it burns energy and produces heat, and this isn't good.
A secondary problem is the bus interconnect because stacking requires shared lanes, so memory layers are in parallel, making the bus interconnect a bottleneck.
Last but not least is signal strength and propagation time: stacking layers requires precise alignment and add electron jumping around, so there's a potential limiting factor in electron propagation, noise and eventual errors. This isn't much of a problem if the system is built around it, but it still is a limiting factor.
There are solutions: since there's one master and multiple slaves there's no risk of collisions and so you can make a lot of assumptions on the drawing board... but busses are going to become wider and more complex, and that will add latency where you don't want it.
My 2 cents.
- I wonder if they run veins of metal in between the layers to send the heat to radiator.
- They put L3 cache on the second layer, which by virtue is quite removed from the logic circuits.
Heat, latency, voltage regulation, signal integrity, etc…. Stacked dies has never been simple which is why there aren’t many of them.
I'd be curious about the thermodynamic side effects of phase change memory during transitions as the crystallisation would release heat while amorphization would be cooling
So, the two biggest old school technologies that are slowing progress seems to be memory and batteries.
Yup!
Also, a shortage of railways.
Thanks. Amazing video. It's kind of interesting how it always comes down to the same principles. First shrinking the size in 2D, then layering stuff, and eventually going into the 3rd dimension. And when that reaches its limits, then change the packaging and invent some hybrid setup. Next, change the materials and go nano or use light etc. instead. Even the success criteria are usually similar: energy consumption, speed or latency, size and area, cost of production, reliability and defect rate, and the integration with the existing ecosystem.
А потом ещё уйти в 4 измерение:D
It's quite bizarre that you thought the PCM memory is a future replacement of SRAM, as the it has a switching speed of 40ns (on par with DRAM), according to the paper you cited. This is an order of magnitude slower than SRAM. The current only viable option to replace SRAM is SOT-MRAM, which TSMC is working on. Go research SOT-MRAM😁
It is good enough for cache application but very bad for register memory.
It also involves a physical change to the medium, which means wear and limited number of writes.
I believe a similar principle has been around since at least the 90s. I used to have a CD-R/W type device that used a laser to heat up spots of a special metallic medium, changing it from smooth to amorphous. Could be rewritten some number of times.
I will say though, your point is probably good and valid, but could have been made more constructively.
@@kazedcat its not good enough for cache, modern caches are at most in the low dozen of ns, 40ns is DRAM levels of latency
This is true. PCM is totally useless as SRAM replacement and doesn’t have sufficient speed or rewrite resilience. Honestly, she really failed to understand its use case. It’s a great alternative to floating-gate FLASH memory, not SRAM!
what about 4ds memory? 4.7 nanosecond write speeds
The words "dynamic" and "static" are a reference to the powering method between state changes. You kind of hinted at this with the TTL logic diagram, but didn't expand. Static is faster because it doesn't have to wait for the re-fresh cycles before it can change state. Static also runs hotter and consumes more power- there are no free lunches ;-)
Not exactly. DRAM consumes power all the time, because it needs constant refresh to preserve contents. SRAM only consumes power during state change. Both consume some leakage current though, and with that, SRAM consumes more due to having more transistors per bit cell. DRAM also consumes considerable current to change state, because of its larger gate capacitance. Overall, DRAM tends to consume more power per bit but costs less and is more compact, which is why we use it for main memory and reserve SRAM for cache and internal registers.
"And here I wanted to make a memory joke, but I don't remember which one"😂
I bought a book on how to improve my memory. But I forgot where I put it.
My memory is so fragmented I can't tell which particle remembered me.
😂😂😂
@@ALTERRAa8 Alterra, also included in a game I enjoyed for a very long time. SubNautica. Thanks for the extra smiles. On my face that is.
My memory is fine. Only problem is having the parity bit in a Schrödinger box.
@taurniloronar1516 damned light. Kick the box and listen for giggles. Good one.
You explain things so well, thanks for a well thought out presentation
I greatly admire the passion you infuse into your presentations. Your work is outstanding, please continue this excellent effort. Thank you!
Thank you Anastasi - great presentation!
Amazing!
This girl researched exactly what I wanted to know.
Thanks.
Interesting idea, but very speculative and in need of a demonstration at scale to assess its practicality. Moreover, although a 23% decrease in area is good for an existing bottle neck, it is not revolutionary, that would need a factor of at least 10. At the current estimated level of improvement it becomes a commercial decision on whether this improvement has a fast enough pay back to justify the r&d costs to make it practical. Is anyone making the investment to commercialize this discovery? Thank you for sharing!
Not really, the silicon lattice constant is only 0.7 nanometers. We can't scale in silicon below that. Germanium has a lattice constant of about 0.5. While process nodes and technology are mostly marketing terms and there is room for improvement beyond "1 nanometer process" - we are about at the end of what we can achieve with existing semiconductor paradigms. It will be almost all architecture and material sciences by 2030. We can't get much smaller.
A 20% improvement over SRAM is disruptive even if it doesn't scale any smaller. SRAM is unable to be scaled any smaller due to the physics underwriting operation.
We only have a few more die shrinks left before we are up against the size of the atom. ... Again, sort of ... A 1 nanometer node doesn't necessarily mean that you can make a grid of 1 nanometer square pads separated by 1 nanometer troughs on all sides, or vice-versa. But as I mentioned, the lattice constant of silicon is 0.7 nanometers, their latest process node is 1.4 nanometers. You can't really cleave off half a crystalline arrangement without having weird things happen, the next die shrink, if it is possible, would come at 0.7 nanometers. We would be, assuming we can make the grid arrangement described, making the smallest transistors possible with silicon, using existing paradigms.... And whatever paradigm comes next would need to use atoms much more efficiently - or some other concepts entirely - to function.
On the plus side, it means that in about another 10 years, we might see computers built with the idea they could last decades in their application.
@@Aim54Delta Great points! Thank you for expanding on the technological limits of the underlying physics not covered in the video. Given these fundamental limits to silicon, research efforts will move to entirely different concepts that may or may not work. Perhaps we will not see much further progress ending the decades long run of ever increasing chip performance or something new will make current silicon architectures obsolete. Fascinating field with huge commercial risk/rewards for company boards to ponder. Thank you for your comments.
Been waiting for your vid.... Love the content
I worked on micron/intels PCM, optane, for a few years. While we were making peogress on some of the problems you mentioned, the venture ultimately failed due to the economics of producing the chips as well as a lack of customers. Would be cool to see it make a comeback in the future
I am shocked she failed to mention optane as well - "new technology" lol.
had they holded on till CXL was here imo it could have taken off, it had great promise it was just in the wrong interfaces
I thank you for your service. When intel announced that they were ending optane, I bought 6 of those PCIE drives; I caught a fire sale. Those drives are the fastest drives I have for doing some disk intensive Studio work. I wish they could've gotten the price down around $100-$200 dollars for the good stuff. I actually got 6 optanes for $45 a piece. I lucked up and bought a box.
Very interesting, I like the way you present info clearly and concisely
Very interesting. Thanks for sharing your expertise. There is always something interesting in your videos. At least in the three or four i have seen so far.😊
I Love the joke about Nvidea Cash 😂
Subscribed... Always interested in intelligent people. You understand what you are saying and are not just spewing words. Fascinating.
Very comprehensive and interesting video. Thanks Anastasi! 👍
Linked to my substack, title, "The very definition of brilliant" That meams you Anastasi. 😊
Nice idea. Very similar to Nantero NRAM that also uses Van der Walls effect to provide resistive cells using carbon nanotubes for SSD/DRAM universal memory.
I've been waiting for NRAM for 20 years, and it is only now beginning to make it's way into the data centre. Let's hope that this technology takes less time to mature.
I am probably close to double your age. When I say I forget a memory joke I am not kidding!
Well said. Excellent video Anastasi!
Thank you for your presentation. I found it fascinating. The phase change memory, amorphous crystal back to uniform array crystal seems like the mental models used to explain demagnetization around the currie point.
I invented stacking when I was 3.
Astro blocks.
@Sven_Dongle
Was that you!?
I though it was David!
Good job 👍😉😆
I enjoy your work.
Yups.. but it keeps bulking
Not bad. My kid at 2 would stack boxes to make a stair to get over the gate. Necessity is the mother of inventions.
Oh hey Al gore… when did u change your name? Lol
That memory joke at 2:32 hahahahahaha, it wasn't just a memory, but a recursivity joke hahahahahaha
That was a great video very informative. You're right, it is an exciting time to be alive with all the evolving technology.
This is not a solution to the SRAM problem, even the authors of the paper state "his work provides key materials and engineering insights towards the design and optimization of energy-efficient PCM, and could inspire the industry-scale adoption of nanoscale superlattice phase-change materials for low-power and high-density storage."
The report states that they have a nice cell size of 45 nm, but a switching time of 40ns and endurance of 2 x 10^8 cycles (SRAM is around 10^15). So this is a possible replacement for Flash memory not SRAM.
As a side note, the use of any heat based phase change storage solution on or near the CPU die would result in some very interesting performance issues as the heat output of the CPU would be impacted by the number of true values held within the cache storage and the frequency the cache is rewritten.
Loved the graph you put together with the memory pyramid (access time vs where is used, with volatility information)!!
P.S. Your accent also becomes more and more easy to understand!
I believe that down the line we would need to use another processor architecture than the Von Neumann one that we use today (i.e. having logic and memory separated), an architecture that instead has an "on memory compute" design, or perhaps a mix of them.
In the end the speed of light makes it hard to compute over longer distances (i.e. CM or even MM) specially when the frequency goes up and the data becomes even larger.
So basically smart RAM chips with shaders?
Very well explained. Thanks
We need more Journalism with clarity to present for the public the real challenges and advancements of Technology.
I appreciate you giving us glimpses into the future of chip design.
I think that soon enough, AI will start to play a role in new designs.
Thanks!
OK I’m calling this out as not feasible in lots of cases. The issue is that SRAM needs to be tightly coupled into an architecture to get the performance benefit. However if a bond-out pad is required (eg chiplet etc) via Bunch Of Wires interface then there will be a delay penalty due to capacitance and transmission line issues. This means added latency and a performance hit. Might be useful for L2 cache but anything local it is of no use. SRAM at the local level is still the best solution.
loved that memory zinger, ur so awesome!
3 nm and so on is a marketing term that has no relation to any dimension of the transistors anymore. The true gate width until now is 14 nm due to asml's lithography machines limitation. The next step for the next decade is going down to 8nm (about 80 atoms wide).
It's incredible how realistic AI creates movies. You can fall in love.
My concern with the phase change memory is just the lifetime and reliability. Do the cells grow oxides or change chemistry over time? Can they be ruined by ripple or electrical noise at scale that hasn't been discovered yet? Etc. Love your videos!
I remember hearing about the SRAM scalling issue some time before the Zen4 release, but then haven't heard anything even though I kept hearing about shinking nodes. Been curious what was coming of that. I was thinking that since it's not benefiting from the scaling, if it may have been counterproductive regarding degradation etc. I wonder if that is what is happening with the Intel 13 and 14K skus? I guess we will find out soon enough. Thanks for the update, I'm glad they are on top of it!
thank dear, its informative
Cooling the buried cores may present a problem in the future
I'd love to see a AIT and High Yield collab someday :D
This does remember me of a mechanical (robot related) movement solution.
They used the same idea in a mechanical way.
It works like muscle cells.
Great information 😊
It has been discussed for decades that close stacking of chips has advantages of speed and size. The issue is heat generation, thus trying to reduce the total charge (electron count per bit). New memory technology is required with far smaller charge transfered per operation.
Paul Schnitzlein taught me how to design static RAM cells. This video speaks to me. Yes the set/clear, and sense amps are all in balance. It is an analogish type circuit that can burn a lot of power when being read.
Another banger video. Do you have discord channel to reach out to?
telegram probably if shes russian
NO COPILOT! NO RECALL! This future is PRISONPLANET! NO WORK NON-STOP!
So each of the 2 phases of the PCM has a different resistance, so the computer can tell 1 from 0?
Can PCM memory be integrated in the same chip as the processor core? Seems like it requires a unique material to be added on a chip
As always fantastic work. I am not so enthusiastic right now with the new technology an endurance of 2E8 is amazing for something like storage, but the computer will go over that in no time for the cache. Even a microprocessor that is not super scalar and runs on the ghz range will be accessing memory in the other of 10^9 per second. Clearly, that access is per cell, and not for the full memory but they need to improve that number a lot.
Thank you for this video. It's great. My two issues: (1) heat dissipation, is not addressed (over cycles there is growth of H.A.Z.), (2) One thing I heard about and remember vaguely, was an attempt at self healing logics (rather, materials + control circuitry), which is aimed at reducing the need for redundancy, in elements at the core of the chip (hottest and fastest environment), and attempts to also better the chip lifetime (cycles 'til dead). -I would be grateful if you could address both.
Rambus memory walks into the room. Where my royalties?
I worry about using non-volatile memory for primary or cache memory because of the security aspect. If the information remains after power is interrupted, quite a few "secrets" will be in clear text, and the determined and well equipped "bad actor" will be able to extract surprising amounts of information from a system.
My industry has to issue letters of volatility with everything we produce, and for anything with NVM, the sanitization procedure usually involves removing the part with non-volatile storage and destroying it. The only exception is when it can be proven that the hardware is incapable of writing to that NVM from any component present on the assembly, even if malicious or maintenance software is loaded onto the device. This phase change memory built in the same package as the CPU logic could not be provably zeroized without some sort of non-bypassible hold up power, and that would increase the cost and size of the chip package.
I think this is very promising for secondary addressable storage, but I don't see it replacing main memory in most applications.
So fancy! I think I want that laptop
Great explanation
About the memory joke, I see you are well trained in dad jokes :D
Great stuff. As someone who built their own desktops through computer conventions in the 90s I appreciate you bringing me up to date on where we stand now in personal computer development😊
14:05
Anastasi: 0.16 micro m² 🤔
Subtitles: 0.016 micro m²🤓
I think you you should pronounce every number after decimals one by one rather than calling them at once
This helps me immensely with my DD into the tech & companies involved in the memory sector, Thank you very much Anastasi!
Thanks for the updates, really informative... I was working on OTP memory designs and this new time of glass memory is looking similar to the concept of OTP memory, may be we can see this kind of evolution in OTP memories side also.
Nicely done.
Haha love how much joy enjoyed your own memory joke
Excellent analysis 👏🏾 👍🏾 👌🏾
Non-volatile and low-latency at the same time, coupled with scalability and hopefully cost-effectiveness in manufacturing, would be a huge technological leap. Thank you for the information.
Xilinx's (now AMD) HBM products were combining FPGAs with DRAM chiplets on a silicon interconnect substrate back in 2018.
Altera released similar tech a year later.
What about keeping the heat down. Sure lower power required in some case but stacking should also increase the requirement for improved cooling perhaps?
This is an excellent explanation of the current state of IC memory. Thanks.
It should be mentioned that process node sizes like N3 or N5 nodes are density measurements and not actually a transistor size. Intel 10nm was equivalent to TSMC 7nm as they average over different area sizes and utilize different shapes and can't be compared directly or even with the size of a silicon atom which is only 0.1 nm in "size".
damn.. really wanted to hear that memory joke
Your channel has really improved over the 2 or so years Ive followed you. Im impressed!
Thank you for being here
Well done excellent video and very informative 👍
what really excites me about this new PCM technology is it's analogue compatibility. i really think APUs will catch on within the next 10 years or so. and this type of RAM is perfect for that application
@Anastasi - you might want to re-post this video taking Intel Optane memory into account. It's a non-volatile PCM memory that's been out for years, and even used as DRAM. As another comment mentioned, it failed due to the expensive manufacturing of the chips and the market simply wasn't there mostly due to fierce competition from flash memory.
optane's real problem was it being place in 2 places where it didn't belong, one was a flash competitor which placed it in a much too slow interface, another was in DIMM competing with much faster Dram chips, if we make a dedicated space for it optane could really bring some benefit but we need to do it the right way.
I believe that the problem of quantum tunneling limitations to size can be addressed by temperature as well as ionic state. This implies that mechanical cooling is a requirement which is expensive and inefficient.
What are the implications of photonics integration in memory?
One of the chief benefits I can see in going to optical computing is the ability to have associative addressing through polarization and muliple concurrent optical reading/writing heads for raid like processing.
Would be interesting to know what makes 3D stacking structure so difficult to achieve
Heat exchange maybe?
Yes, though theres more limitations, it's really hard to manage heat in a 3d structure.
It also requires new innovative ways to do it.
This is why a room temperature super conductor would be such an amazing breakthrough. You wouldn't need to worry about heat management and you could up the frequency to Thz levels while maintaining manageability even in a 3d transistor structure. Computing would be millions and billions and even trillions of times faster
Suggest captions. I think I’d like Anastasi in Tech even more.
In addition to learning heaps about memory, I really enjoyed hearing you say SRAM lots.
Interestingly, computing is still based upon an electron pump system when the Spherical Photon Well combines logic and data storage in one system that moves at the speed of light.
Correct me if im wrong but we've been exploring stacking for a while with things like HBM being a stack of memory for GPUs.
A nonvolatile cache memory creates exciting new ways that processor microcode that can be infected with impossible to trace privacy stealing back doors.
Thank you for sharing this new & exciting development 😊
3d stacking was the innovation that allowed more memory on the chip, not chiplets. Chiplets were a great innovation, but they were not what you wanted to discuss here.
You also didn't explain the downsides to 3d stacking (memory layer holds in some of the chip's heat, so they need to limit their power somewhat). 3d streaming has been something they've wanted to do for decades, but only now were they able to make the chips efficient enough to make it worthwhile.
Resistive RAM? related to memristors?
There are different kinds of resistive RAM. Memristor is just one of them.
Thank you!
AFAIK, PCM itself is a fairly old idea and many companies (e.g. Samsung, Micron, Western Digital, IBM) have experimented with it and even made products using PCM. This new advance just makes PCM more competitive at the time when SRAM is struggling to keep meeting the needs of the industry. So it is a big deal, just not a completely new big deal ;)
I'm a big fan of mammary technology I would hate to see it go.
This was an unexpected good video. This is my first video watch of the channel.
You are brilliant! Great content. Thanks for this. ;)
I wish TCAM (ternary content addressable memory) and nvSRAM both had a chance to become more widespread.
Great video - thank you Anastasi :-) I think if we stack much more memory as 3rd level cache chiplets on top of CPUs we may reach the size of gigabyte 3rd level cache. And this would eliminate the external DIMMs on the mainboard which makes future Notebooks and PC again cheaper and reduces not just the complexity of the mainboard but also of the operating system, drivers and firmware because data can be loaded directly via fast PCIe lanes connected SSDs to 3rd level cache.
But it has one significant problem: a large amount of energy is always released during the phase transformation. This technology addresses the issue of overheating, which needs to be resolved
You forgot "... and none of them is anywhere close production ready on the scale needed."
this crystalamorphous state change.. that means it's non-volatile?? Wow.
I seem to recall that IBM was using chiplets as far back as 2+ decades ago but for mainframes IIRC