This guy is the man! So informative and I did the same thing! I didn’t label my buffs and just used same buffs on both materials and couldn’t figure out why I wasn’t getting the look I wanted. Thanx Evan!!!
Hi Evan, we have managed to turn stainless blue through too much heat, it was only 1-2mm thick though. Absoulte nightmare, on the yachts we work on there's lots of thin aesthetic stainless steel items.
I'm barely able to keep up with what videos you have made and the new one's you are putting out. Haven't seen a boring one yet. Gearing up for the 40 minute episode and review some of the already seen one's this weekend.
Thank you for the really great videos. I want to use my drill press for buffing smaller pieces. Can I weld the center plate to the ring and not use safety flanges for 8” airway buffs?
Yes they can be sanded. If they are deep you'll sand light and then just make them shiny pits. If they are light pits you can sand them out and shine it up. You might find this video helpful. ua-cam.com/video/i9klCSlwCn0/v-deo.html This isn't a pontoon specifically but the process is exactly the same. Thank you for watching and thank you for the great question. Appreciate you watching and commenting.
Not really. You can always put a more abrasive over the top and still use it. Example if it was a green rouge you can use brown over it but it'll never go back to a green rouge buff. I hope that makes sense.
I use different compounds on each. Green can be used on both metals but the brown should only be used on aluminum and the black should only be used on stainless. Will they work on the other metals sure. But will they work good or efficiently, no not really. Great question.
Yo, catching up with your videos, your channel looks good, professional, and informative, this particular vid was helpful, just to give you an example of your do-everything type viewers like me, what does it mean when you say “COLOR”. Or putting the “color coat” or whatever? Thanks! I’m looking for a vid that shows the cutting or polish of those drain holes in dump trucks too.
restoring a 2014 pontoon boat and wish to get the toons shined up. I've got yellow and white buffs with the four primary compounds please advise as to what buff with which bar/compound to use. I started with yellow/Tripoli and got so so results but looked like needed more "umph" Please help
Check out my how to polish trailer rails and pontoons video. It will give you a complete step by step process on how to polish. You will likely need to purchase more supplies than just yellow and brown. Check it out. If you still have more questions give me a call at 9209790386 and I will try to help walk you through the process.
Evan, What do you think causes a white flannel buff to spit rouge. Running it at low speed probably 1500-2000 and it throws small specs of black that then don’t come off with the buff. Thanks!!!!
Hey Evan, recently got a job driving a tanker. OMG theres a lot to polish!! My question, how to load up your buff. I cant seem to get enough polish on my buff from the polish bar. Suggestions???
We do not use these exact buff any longer. If you go to our website www.goshineon.com you will see the stainless kit. It is red buff with black bar and green buff with yellow bar.
what would you recommend using to polish in tight areas where a big buff wont fit. I am working on polishing aluminum propane tanks for a camper and I am having trouble getting in the areas on the top near the valve. thanks
I recommend a product we carry called luhmi and a cone buff or mushroom buff on a power drill. That is the best solution I know. Both are available on goshineon.com/shop
Hey Evan i need to detail 2 boats one is a pontoon i need to get every tool needed can you help with a kit or something i will get an angle grinder if you dont have one to sell thanks
@@EvanStegerMetalPolishing o I've seen someone on youtube do it thanks I just use one of those mother's balls and light polishing compound to clean them up.
It is very possible. You just need to match your pressure and your overlap with each other. If your overlap and pressure match then you will have no white lines or black lines.
I am just starting out polishing and I bought your stainless kit that came with a red buff and a purple buff. It has a yellow bar and a brown bar. Can you tell me which bar goes with which buff?
Wondering how much I needed to sand my forged wheels down and how to know with what grit Sand paper to sand them down with.any help would be nice thank you
Every job is different. Text a picture of close up how bad the wheel is to 9209790386 and I will try to help you with a starting point. I try not to sand more than I have to and there really isn't a set standard of where to start and finish.
This man is the best one day I will come up there to get my stuff done!!
I’m far from the best but we try hard.
This guy is the man! So informative and I did the same thing! I didn’t label my buffs and just used same buffs on both materials and couldn’t figure out why I wasn’t getting the look I wanted. Thanx Evan!!!
Glad to hear the great feedback. Thanks for watching and applying.
Hi Evan, we have managed to turn stainless blue through too much heat, it was only 1-2mm thick though. Absoulte nightmare, on the yachts we work on there's lots of thin aesthetic stainless steel items.
That is impressive. I have tried to turn it blue or burn it and haven't succeeded yet. I would love to know how you achieved it.
I'm barely able to keep up with what videos you have made and the new one's you are putting out. Haven't seen a boring one yet. Gearing up for the 40 minute episode and review some of the already seen one's this weekend.
So grateful for people like you. Hope they are all helpful. Thanks for watching. Hoping to keep putting out more great content.
That’s a great tip! I started labeling My buffs and it helps a lot
Glad it was helpful! Thanks for watching.
Thank you for the really great videos. I want to use my drill press for buffing smaller pieces. Can I weld the center plate to the ring and not use safety flanges for 8” airway buffs?
Learning a lot from your videos.
Great to hear. Thank you
Evan…I have pits in my pontoons….can they be removed and how?..seems to be a question most avoid.!!!
Yes they can be sanded. If they are deep you'll sand light and then just make them shiny pits. If they are light pits you can sand them out and shine it up. You might find this video helpful. ua-cam.com/video/i9klCSlwCn0/v-deo.html This isn't a pontoon specifically but the process is exactly the same. Thank you for watching and thank you for the great question. Appreciate you watching and commenting.
Great video , it really help me understanding , the colors .
Glad it was helpful thank you for watching. I appreciate it
Dammmmm man I wish you had shop down here in Charlotte, NC they need one so dad
I wish too. I get lots of calls from down there. Thanks for watching.
Thanks for setting me straight
Thanks for watchin.
6:22 yes that helps a bunch!!! Thank you now🤣💥💯😎
Happy to hear that it was helpful. Thank you for watching.
What color should I use for crome
How /what do you use to clean the black residue out of the buffs and towels?
I accidentally put two different compounds on my wheel (didn’t label my wheels) would raking them out solve cross contamination?
Not really. You can always put a more abrasive over the top and still use it. Example if it was a green rouge you can use brown over it but it'll never go back to a green rouge buff. I hope that makes sense.
Hi Evan are the compounds you use on both stainless and aluminium the same compounds
I use different compounds on each. Green can be used on both metals but the brown should only be used on aluminum and the black should only be used on stainless. Will they work on the other metals sure. But will they work good or efficiently, no not really. Great question.
Yo, catching up with your videos, your channel looks good, professional, and informative, this particular vid was helpful, just to give you an example of your do-everything type viewers like me, what does it mean when you say “COLOR”. Or putting the “color coat” or whatever? Thanks! I’m looking for a vid that shows the cutting or polish of those drain holes in dump trucks too.
Thanks bud. I have a few videos that define color and such. Thanks for watching.
Which one is best for polishing guns ????
Depends what type of guns. If stainless you would go with the stainless buffs and compounds. If aluminum you'd use the aluminum buffs.
What would you recommend to polish my stainless BBQ?
your videos are great evan to keep up the good work
Thanks for watching.
When would you use the Zephyr Orange Ruffy wheel? I accidentally bought one thinking it was a regular orange buff. Is it useful at all on aluminum?
restoring a 2014 pontoon boat and wish to get the toons shined up.
I've got yellow and white buffs with the four primary compounds
please advise as to what buff with which bar/compound to use. I started with yellow/Tripoli and got so so results but looked like needed more "umph"
Please help
Check out my how to polish trailer rails and pontoons video. It will give you a complete step by step process on how to polish. You will likely need to purchase more supplies than just yellow and brown. Check it out. If you still have more questions give me a call at 9209790386 and I will try to help walk you through the process.
Evan,
What do you think causes a white flannel buff to spit rouge. Running it at low speed probably 1500-2000 and it throws small specs of black that then don’t come off with the buff. Thanks!!!!
Not sure what you mean. Text me what you mean and I will try to help you out. 9209790386
Hey Evan, recently got a job driving a tanker. OMG theres a lot to polish!! My question, how to load up your buff. I cant seem to get enough polish on my buff from the polish bar. Suggestions???
I have a video on how to load a buff.
Is there a company that sells these buffing wheels in europe? Struggling to find them
Luhmi Amglos sells similar items in Europe.
@@EvanStegerMetalPolishing Thank you very much!
I've used black with Orange on cutting sometimes..
Definitely can but won't stay shiny long without a sealant.
@@EvanStegerMetalPolishing oh ok I didn't realize that
I'll go over it with brown..then purple
Stainless cut Pink buff/ Black. Color is purple buff / yellow?
We do not use these exact buff any longer. If you go to our website www.goshineon.com you will see the stainless kit. It is red buff with black bar and green buff with yellow bar.
Sou Brasileiro mas sempre acompanho suas dicas, voce vende essas boinas no site? Aqui no Brasil é dificil de achar..
English?
@@EvanStegerMetalPolishing I am Brazilian but always follow your tips, you sell these berets on the site?
Lol. Was just thinking of using a red/brown combo on aluminum. Naturally you had the answer
Thank you for watching!
what would you recommend using to polish in tight areas where a big buff wont fit. I am working on polishing aluminum propane tanks for a camper and I am having trouble getting in the areas on the top near the valve. thanks
I recommend a product we carry called luhmi and a cone buff or mushroom buff on a power drill. That is the best solution I know. Both are available on goshineon.com/shop
Wish your website shipped to Ontario Canada option.... ☹️
It should be working now. Sorry we had some issues with the shipping not calculating properly but should be working now.
Hey Evan i need to detail 2 boats one is a pontoon i need to get every tool needed can you help with a kit or something i will get an angle grinder if you dont have one to sell thanks
Email ellen@goshineon.com or call 920-717-3140. Thank you
Super helpful!
Glad it was helpful! Thanks for watching.
Does that go same with chrome not to cross them
You can't buff chrome. Chrome is a plating. It will buff off.
@@EvanStegerMetalPolishing o I've seen someone on youtube do it thanks I just use one of those mother's balls and light polishing compound to clean them up.
@@james6jewel Oh gotcha
Are u shipping worldwide for the tool for polishing ..from asia
We don’t sell grinders but everything else yes.
Hey Evan what compound do you recommend/use on stainless?
Goshineon.Com I sell everything I use. I have a stainless kit. Or you can buy just parts.
@@EvanStegerMetalPolishing thanks I appreciate it keep the videos coming I really appreciate them and how you explain everything
What buffs with what compounds would you use on plain steel?
My stainless kit is what I use on plain steel. But remember plain steel will rust in the elements.
What would the average price be per polished wheel?
I charge based on condition and quality desired. Every wheel is different.
Evan Steger say a good shape wheel how much would it run about?
@@BENITOHERRERA Your good shape and my good shape are likely different. Send me a pic of the wheel and I can get you an estimate.
Awesome content man
Appreciate it! Thanks for watching.
How do you polish a flat surface and not have lines in it...???... Or Is it even possible...???...
It is very possible. You just need to match your pressure and your overlap with each other. If your overlap and pressure match then you will have no white lines or black lines.
How do I find your kits ? I looked on the link
goshineon.com
I am just starting out polishing and I bought your stainless kit that came with a red buff and a purple buff. It has a yellow bar and a brown bar. Can you tell me which bar goes with which buff?
I apologize for missing this question. The buffs and compound colors have changed. Stainless not ir red with black and green with yellow.
Wondering how much I needed to sand my forged wheels down and how to know with what grit Sand paper to sand them down with.any help would be nice thank you
Every job is different. Text a picture of close up how bad the wheel is to 9209790386 and I will try to help you with a starting point. I try not to sand more than I have to and there really isn't a set standard of where to start and finish.
I'm an owner op and I want to learn this art to do it myself and save me some money. I'm subscribed...thanks👍
Thanks for watching.
Just pay someone who knows what they're doing, you don't have time to learn buddy.
Awesome
Thank you for watchig.
Our questions aren't "goofy" we ask because we can get a straight answer from you. They are not "goofy" to us.
I’m sorry. I try to give as straight of answers as I can.
Thank you for your videos and store. My Alcoa’s look 1000 per cent better.
Glad to help. Thanks for watching.
Dude, 7 minutes in and still no real info.
Sorry you felt that way. For new comers it seems be helpful. Nonetheless thank you for watching.