E30 BMW Z3 POWER STEERING RACK CONVERSION PART 2
Вставка
- Опубліковано 30 вер 2017
- Part 2 of the BMW Z3 Power steering rack conversion for a BMW e30, Also in this video I will install the Magnus Racing Team Bump Steer roll center correction kit for the E30 and E36 to fix the factory suspension geometry after lowering the car and also add more steering angle to the car.
Parts Used-
Magnus Racing Team Bump Steer/Roll Center Correction kit also quickens the steering inputs by 30% and adds more steering angle.
/ magnusracing. .
Garagistic-
-E30 & E36 Control Arm Eyeball Offset Arms - "Treehouse"
store.garagistic.com/E30-E36-...
-e30 steering rack swap kit (non-airbag version) - z3, e36, e46
store.garagistic.com/e30-stee...
CaTuned-
catuned.com/e30-front-end-sus...
catuned.com/competition-race-...
catuned.com/e30-motorsport-st...
You will also need a Z3 or E36 power steering rack you can order one from CaTuned if you would like tell Igor Blake's Garage Sent you.
➥ Get $5 off MyPetrolBox use coupon code "WRENCHON" mypetrolbox.com
➥ Get 20% off TUNER CRATE using code "WRENCHON": bit.ly/28W8UvW
➥ Blake's Garage T-Shirts: www.wrenchon.com
$600 Brembo Brake upgrade
➥ACDelco 172-2587 GM Original Equipment Front Passenger Side Disc Brake Caliper Assembly geni.us/7OEiC3 [Amazon] $86.06
➥ACDelco 172-2586 GM Original Equipment Front Driver Side Disc Brake Caliper Assembly geni.us/D1eNO0M [Amazon] $81.17
➥ACDelco 18K1971X Professional Front Disc Brake Caliper Hardware Kit geni.us/JEezs [Amazon] $17.51
➥StopTech 125.47019 Premium Brake Rotor geni.us/6VRujC [Amazon] $70.39 + $12.99 Shipping X 2 = 166.76
➥ACDelco 17D1050M Professional Semi-Metallic Front Disc Brake Pad Set geni.us/BMUTl0 [Amazon] $34.69
➥www.ctsvbrakeswap.com $220.00
Car Products I use:
➥Chemical Guys EcoSmart-RU geni.us/cYA0j1Q [Amazon]
➥Chemical Guy Hybrid V7 Optical High Gloss Spray geni.us/b6oOz9r [Amazon]
➥Chemical Guys Diablo Gel Wheel and Rim Cleaner geni.us/mveVJiC [Amazon]
➥CarPro Reload Sealant Spray geni.us/aPAked [Amazon]
➥CarPro PERL Coat Plastic & Rubber geni.us/kJJC7 [Amazon]
➥Durafoam Contoured Large Tire Dressing Applicator geni.us/ael99K [Amazon]
➥Chemical Guys Lava Luminous Glow Infusion WAX geni.us/zgbvI5S [Amazon]
➥Chemical Guys Light Duty Clay Bar and Luber Synthetic Lubricant Kit
geni.us/wBQcygf [Amazon]
Camera Gear I use:
➥ Canon 70D geni.us/0PwNR [Amazon]
➥ Canon 17-40mm F/4 Lens geni.us/nN8f7vs [Amazon]
➥ Rode Video Mic Go geni.us/PzaQOv [Amazon]
➥ GoPro Hero 3 Black geni.us/xLKq0E [Amazon]
➥ Manfrotto 502 video head here geni.us/Be7l [Amazon]
➥ Rode Video Mic Go geni.us/PzaQOv [Amazon]
➥ Zoom H1 Handy Portable Digital Recorder geni.us/bISj [Amazon]
➥ Lapel Mic HUACAM YYPJ-01-1 geni.us/hJHwM [Amazon]
➥ ProMaster XC525 Red Tripod With Head geni.us/BGBEpp [Amazon]
Channel Art by Synq DZN Check out his Channel
➥ / improvings
➥ plus.google.com/+AkzMC/ - Авто та транспорт
![Best E30 Steering Rack Swap [Z3 2.7 vs Purple Tag Rack] BMW How-to Conversion Guide | 039](http://i.ytimg.com/vi/0nMKFGFm9Zc/mqdefault.jpg)
Nice work buddy, can't wait to get under mine again this weekend
Love your channel bro. Learning so much. Makes me want to work on my own car.
Great vid, I would love an E30
*gets on UA-cam*
*sees video*
*TAPS AS FAST AS POSSIBLE BECAUSE I'VE BEEN WAITING*
Da Mookster58 thanks! Hope you enjoy 👍
That z3 rack is gunna be super duper
Goodluck
I wanna see some boost on the e30 !!!!!
I love your videos they are really helpful and make me wanna work on my e30 more.maybe do some cosmetic mods like a new front lip or maybe a mtech2 body kit??? Then it would really transform the car. Keep up the cool vids
really nice mods man i ll do the same on my track car
That was a lot of help thanks
Pickle fork and a BFH is the best tool combo!
Dallin Jensen hell yeah the BFH is one of my favorite tools!
Cool, dude!!
Cool upgrades and good parts! I think you should consider an X-Brace (if it is not already the case) , regarding the tires and the agressive driving you foreseen ;)
If you wouldn’t fit spacers, but proper alloys, what would be the offset so it would clear the sway bar and shock by the looks of it. Great video, looking forward to doing this myself
What year model can I get the z3 rack or is it best to get the last mode which is 2002 ?
how did you get the steering rack aligned with the steering wheel ? is it pretty easy ?
A new video 😃😃😃😃
What happend to your drain plug bro?
Are you going to post a vid of your driving impressions? Curious to see how the difference feels.
Jason Boyce yeah AutoX video will be coming.
hello please could you make a list of all the things you have changed on the e30. thanks from the U.K
agentriley2000 good idea 👍 when I get some time I will make a list for sure.
Which front sway bar do you have that is rubbing? Did MRT provide any caution about that w/ their bump-steer correction piece? You are basically doing eveything that i plan on doing to my 87 sedan. I might use a e46 rack de-powered rack though, and had been looking at the SLR kit instead... Thanks for the details, especially grindding smoothing the knuckle shaft binding points. Keep it up!
Sean S basically with any type of angle kit you’re going to run into rubbing issues. I will either make some rack limiters or get wheel spacers and possibly longer lower control arms.
Cool, thanks man. Limiters/stops are good to me, maybe small width wheel spacers. You have the stock sway bar mounting points or the M3 ones on your coilover setup?
Thanks for making this video. I'm about to do the z3 rack swap, so this is really helpful. Some of the r3v write ups mention swapping the Power Steering reservoir and low pressure line. It doesn't look like you did that. Is it not necessary? will the stock low pressure lines reach the z3 rack? Thanks!
Jp Policastro I made it work by just slightly bending the line or maybe I flip floppes it I forget but I think I cover that in the video.
I cover it around 7:15 of the video
I see that now! Thanks. I thought you were talking about the high pressure in the video. I see now that you mentioned both. Thanks again!
Did this swap a couple of weeks ago and it turned out great. The lines were a pain. I might swap them eventually. But, I wanted to thank you for your video. It was a huge help. Keep it up!
Where do you buy them thks
What year z3 steering rack is this?
I’ve been searching for the chromoly outer tie rods that you have. Can’t find them anywhere. Did MRT give these to you as one-offs/prototypes?
Yeah there custom! Contact him on IG and he can make you some. Only Necessary if your running the older kit with 15’s
Did you leave the plastic boot protector on the control arm when you installed it?...
Haha yeah you caught that lol 😂 yeah I removed it don’t know why the hell I didn’t take it off at first.
Great video--well shot and well explained. It makes me cringe, though, to see you using the palm of your hand as a hammer on suspension parts. After a lot of years doing the same thing, my hands are now pretty arthritic. Use a soft hammer, Blake!
Are all the z3 steering racks the same throughout all its models?
All z3-non M racks are the same. The z3-m racks are the same as the E36 M3.
Hmmm, sweet...good looking out with the info.
Welcome To The Madness no problem!I have a z3 rack in my e36 M3, it completely transformed the car. Probably the best mod on the car. You absolutely won't regret it.
Make sure to follow me on IG @blakesgarage
Don’t really like the idea of the tire hitting sway bar at under full rotation. Say you are in autocross and turn full lock and hit the sway bar real hard you can probably damage it and/or cause temperature lock up of the wheel
Please tell me you didn't leave on the plastic shipping cover for the inner balljoint boot...? Right?
Edit: Yes still clearly visible. Would be a wise move to take the control arms back off and remove the plastic covers! Take care!
Haha someone finally noticed. Yeah I took that off after the fact lol
Ha! It happens! Have a handful of e30's myself... sometimes its hard to fight the excitement of new parts! Keep it up!
"Hi, I'm Blakes Garage, and I make no mention of how much of a pain in the dick it is to get the 22mm nut that attaches the control arm to the subframe off on the passenger side."
First time I did this, I couldn't get it to budge. Ended up supporting the engine and dropping the whole subframe.
Haystack Malone lol the magic of editing. But also in the power steering rack was out of the car it made it much simpler to get to.
Мужик она на автомате
Your videos is da shit..
upgrade your brake lines
Daniel Alvarez I actually have them. Did the rears when I did the rear Subframe brakes will be updated soon.
Blake's Garage Nice!👍🏼