HELPFUL TIP: On the passenger side, plastic cover box that goes over the passenger side factory fog light housing, it WILL NOT fit back over the baja light unless... you cut a notch into the passenger side of it to clear the baja metal bracket. You cut it at the ridge area. Once you have the passenger baja fog installed, set the cover box over it and you'll see where the baja bracket is hitting the plastic cover on the right. Just cut a 1/2 notch long notch at that point that is about as wide as the baja metal bracket ear and it will slide right back over with no issue. Now on the 2020, I did notice that the only thing holding this plastic box cover are the side two tabs, the top tab is just a press fit lip, that white clip does not hold the cover, it holds the fog light housing in place. Hope this helps!
I used Squadron-R Pro, LED Wide Cornering, Amber, ridiculouosly bright, use them off road and late night highway driving, I have to turn them off with on-coming traffic.
None of this process was as easy as it appears in the video. It was part IKEA assembly and art project and finally the install in the car. I think the process to install brackets could be better.
@@sallysmith7600 I ended up getting a long flat head screwdriver and pressing the the two side tabs simultaneously. It took some tinkering with. I would definitely pop the top white tab first.
@@christophergantt1635 Okay cool thanks for the advice. I was trying to not disassemble the entire wheel wheel but I guess I have to. Apparently that cover protects the connector from the air intake on that side, so it's recommended to keep it on. Who knows though, that seems silly.
since you are just replacing your factory fogs, yes, they are. Just make sure to aim the properly and not blind oncoming traffic and you should be fine.
The sport and pro versions are NOT street legal. That is why they have SAE (street legal) versions. You can install the sport or pros if you wanna blind people. You may or may not get ticketed depending if cops care enough to.
HELPFUL TIP: On the passenger side, plastic cover box that goes over the passenger side factory fog light housing, it WILL NOT fit back over the baja light unless... you cut a notch into the passenger side of it to clear the baja metal bracket. You cut it at the ridge area. Once you have the passenger baja fog installed, set the cover box over it and you'll see where the baja bracket is hitting the plastic cover on the right. Just cut a 1/2 notch long notch at that point that is about as wide as the baja metal bracket ear and it will slide right back over with no issue.
Now on the 2020, I did notice that the only thing holding this plastic box cover are the side two tabs, the top tab is just a press fit lip, that white clip does not hold the cover, it holds the fog light housing in place. Hope this helps!
My cover snapped back in fine with no issues or modifications on my 2020 SR5.. weird.
Some output shots of the before (with factory)/after (with Baja) would have been great
Great install video! I just got the same fog lights but I can't get the screws for the brackets to bite the threads on the lights no matter what I do.
There’s a part of the housing that prevents you from turning it clockwise!
I used Squadron-R Pro, LED Wide Cornering, Amber, ridiculouosly bright, use them off road and late night highway driving, I have to turn them off with on-coming traffic.
Thx for the tutorial…..easy peasy
I want to know what lift is on this 4R! I want mine to sit higher up
Cheapest way is to do a level kit with spacers. Instead of upgrading suspension. It will give it a nice lift
@@williamsteward2184 spacer lift kits will ruin the ride quality.
Where can a get the part number for the BD cable adapter?
Great vid, thanks!
Anyone have an early fifth gen? The fender liner on mine has waay more clips and screws connecting the inner and outer fender liner
Does the 4R have wheel spacers in this shot? Also, is it brand new here or treated with ceramic? Thanks!
Will this be the same with the 2021s? I know they updated to LED fogs...
Thanks for the video
Can I install them without having to lift up the 4runner with a jack or car lift?
For sure, you'll just have to get down and dirty!
None of this process was as easy as it appears in the video. It was part IKEA assembly and art project and finally the install in the car. I think the process to install brackets could be better.
Anyone know what size bolts are needed, they sent me bolts that are too big.
Same issue here too!
Do i need to unplug the battery?
I can’t get the cover on the passenger side off, any recommendations?
Did you ever figure this out? I can't get it off either..
@@sallysmith7600 I ended up getting a long flat head screwdriver and pressing the the two side tabs simultaneously. It took some tinkering with. I would definitely pop the top white tab first.
@@christophergantt1635 Okay cool thanks for the advice. I was trying to not disassemble the entire wheel wheel but I guess I have to. Apparently that cover protects the connector from the air intake on that side, so it's recommended to keep it on. Who knows though, that seems silly.
@@christophergantt1635 I’m having the same problem lol. I’ll try that method now
Eric trump?
Are they considered street legal?
since you are just replacing your factory fogs, yes, they are. Just make sure to aim the properly and not blind oncoming traffic and you should be fine.
The sport and pro versions are NOT street legal. That is why they have SAE (street legal) versions. You can install the sport or pros if you wanna blind people. You may or may not get ticketed depending if cops care enough to.
The audible gasp I made when he bent the fender liner
Dam bro I should of done this myself if it was that easy 🤦♂️ this guy taking hours just to install mine
You paid someone to install fogs? Lol
You had a guy take hours to install fogs??? Lol I can guarantee it's not a clean install
TOYOTA. BLASPHEMY.
This will be the spark that starts a civil war within Stage 3.
i got raptor 6.2 and fj cruiser - got my f150 brakes from here they installed great 👍