I have an MP140, about 15 years old now and has always worked perfectly depite being run on injected ink refoills for the last 5 years. This morning it wouldn't load paper, eventually got it to print a page. I got it out to investigate and it was sitting in a pool of ink, must be because I reset the waste ink tank counter years ago and it is now overflowing. Tried to get to the tank by taking the side off and lifting the head cleaning unit out. but impossible to get to the ink tank. Plugged it back in, paper still jamming then it got in a state where it just flashed E3 on startup. Tried resetting the EEPROM from the service menu, no change. Smashed it ont he ground a few times, still not working and ink cardridges fell out! Then I tried ramming a thick sheet of corrugated cardboard through it and tugging it back and forth. Just about to give up when something came loose and started rattling around. It ws part of a pen cap, with that removed turned it on and it works perfectly again!!!
I have the mp140 and it's never given me any trouble ever, 7 years old and still goes like a dream. though I should plug it into my laptop at some point and clean the heads they haven't been cleaned for long. wasn't expecting that at the end with the hard reset though
Maybe because you used only genuine cartdriges - if you refill them u get E5 error - why do you think I am here? romanian: probabil din cauza ca ai folosit cartuse originale - daca le faci refill iti da eroarea E5 - de ce crezi ca sunt aici?
Canon the worst printers. I'm using original cartridge, still same. I've even tried to erase the EEROM using a different software. Its doesn't work at all. STUPID PRINTER. I'll buy a HP instead. Never buy a canon.
I have the same crappy printer and it gave me a lot of headache like you had . Why in hell they make such garbage printers and if you run out of ink ,you can not use the scanner . Big assholes companies when they get so greedy and stupid and they say we have too much electronic junk ..... it is because of greedy stupid managers like those .
Peace be upon you. I have a problem with my Canon printer mp140. An error code has appeared E 2. 3. E The printer does not respond to the beep for the error. Also, when we open the door, the cartridge does not respond and does not move, and this malfunction appeared after the paper was jammed and removed with difficulty.
My wife hard resetted me this past weekend and I’ve worked great since!
best hard reset i have ever seen!!! you made my day! 🤣
The power/reset/power/reset x5 code actually worked, thanks. Can’t wait to replace this thing
Hi David, thanks very much. It was very helpful and worked for my printer MP160.😃👌
Gotta admit you had me in the first half!
well, that did the trick for me, now everything works as expected
Thanks for your video. I often want to smash up my printer and computer.
😂 perfect hard reset, I will definitely try that..
i think i'm gonna try try this fix, once nothing else worked! Thanks, and my next one won't be a canon for sure!
try HP or brother but HP was the most reliable so far, never again canon sutch a pain in ....
I have an MP140, about 15 years old now and has always worked perfectly depite being run on injected ink refoills for the last 5 years. This morning it wouldn't load paper, eventually got it to print a page. I got it out to investigate and it was sitting in a pool of ink, must be because I reset the waste ink tank counter years ago and it is now overflowing. Tried to get to the tank by taking the side off and lifting the head cleaning unit out. but impossible to get to the ink tank. Plugged it back in, paper still jamming then it got in a state where it just flashed E3 on startup. Tried resetting the EEPROM from the service menu, no change. Smashed it ont he ground a few times, still not working and ink cardridges fell out! Then I tried ramming a thick sheet of corrugated cardboard through it and tugging it back and forth. Just about to give up when something came loose and started rattling around. It ws part of a pen cap, with that removed turned it on and it works perfectly again!!!
It solve the E5 error in my printer.
But i pressed the reset for 4 times instead of 5 times.
Thanks.
It worked thanks
Thank you man. It worked.
"Hard reset" - fan-fukking-tastic!! Thats going to be the same result with the printer I got as well.
🤣 Same issue with my mother-in-laws mp150, tempted to try the hard reset after 40 mins of faffing...
True that.
Going to try the hard reset setting on mine too.
I have the mp140 and it's never given me any trouble ever, 7 years old and still goes like a dream. though I should plug it into my laptop at some point and clean the heads they haven't been cleaned for long.
wasn't expecting that at the end with the hard reset though
Maybe because you used only genuine cartdriges - if you refill them u get E5 error - why do you think I am here?
romanian: probabil din cauza ca ai folosit cartuse originale - daca le faci refill iti da eroarea E5 - de ce crezi ca sunt aici?
Canon the worst printers. I'm using original cartridge, still same. I've even tried to erase the EEROM using a different software. Its doesn't work at all. STUPID PRINTER. I'll buy a HP instead. Never buy a canon.
I have the same crappy printer and it gave me a lot of headache like you had . Why in hell they make such garbage printers and if you run out of ink ,you can not use the scanner . Big assholes companies when they get so greedy and stupid and they say we have too much electronic junk ..... it is because of greedy stupid managers like those .
Omg nearly weed laughing sitting bu my rubbish old canon trying to print homework for kids
Peace be upon you. I have a problem with my Canon printer mp140. An error code has appeared
E 2. 3. E
The printer does not respond to the beep for the error. Also, when we open the door, the cartridge does not respond and does not move, and this malfunction appeared after the paper was jammed and removed with difficulty.
in my printer canon k10282 alarm flashes 2 times .what can I do for this.plz reply
Question. I just attempted a "hard reset" and now it won't even turn on. What should I do at this point?
Buy a hammer.
@@davedwardsmarine a fucking BIG one :)
ya may be this is a joke rich people,, not for less unfortunate people like me,, only have one n no money to buy another one
Hahahaha I have this in mind right now hahahaha
It not working for me E2
reset here it not working i have code E 5
wtf i was watching too seriously
Terrible waste of over two and a half minutes. No help at all!
U need to be an intelligent person to get the sense of humour in this video!
romanian: Trebuie sa fi inteligent ca sa prinzi umorul din acest video!
There is a solution - I guarantee to work - it will cost you 1$ to get it from me.
It worked! :)
Y yo haciendo toda la secuencia como una boluda jajajaja
ya not helping mate, but great ending.😂😂😂
There is a solution - I guarantee to work - it will cost you 1$ to get it from me.
nice,,i like
If you can not help to fix, do not waste your time filming it, and do not waste our time watching this crap.
U need to be an intelligent person to get the sense of humour in this video!
romanian: Trebuie sa fi inteligent ca sa prinzi umorul din acest video!
There is a solution - I guarantee to work - it will cost you 1$ to get it from me.
kkkkkkkkkkkkkkkkkkkkkkkkkk
Ne törd a nyomtatót!! :-(
English maybe? nobody can understant your mambo jumbo...
zzzzz
Hahahahaha!!!!
Fraiere 🖕