Це відео не доступне.
Перепрошуємо.
Troy-Bilt Pressure Washer Troubleshoot and Repair
Вставка
- Опубліковано 27 сер 2020
- In this video we check out a Troy-Bilt Model 020296 pressure washer that was locked up and leaking water from the pump. We end up installing a new aftermarket pump to solve the problem. Here is a link to the pump I used.
amzn.to/371xbzY
UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ua-cam.com/users/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
Dude that was a perfect video. No extra fluff. Just the right stuff for what I needed. I have the exact model that is leaking and stopped pressurizing. We'll see what I find. Thanks
I am glad it helped. Best of luck!
This is one of the best videos I've watched on the subject. I'm about to go out and attempt to get the water pump off. Thanks very much for the help.
I picked up one of these washers for $40 with the same issue. Pulled the pump, found zero oil gear oil. Add oil, cranked it by hand, reassembled, and works like a champ again. If I were a betting man I’d bet your would of started working too.
It may have started turning but before all of this it was leaking pretty badly and would hardly pump.
Great video 😊Blessings 💯 🤗 🙏
This describes precisely what I need to do to my pressure washer. Thanks. Also: cool C-10 in the background.
Excellent instructional video. Got all the camera angles perfect and the sound too. BRAVO!!
Thanks! I don't hear that too often.
Excellent tutorial. I will take your video and attempt to repair my power washer. Thank you.
Glad it helped
Crusty and crunchy! Great vid Sir! Keep cool/warm. Love the insect sounds of summer. Going to look at my freebie pump now.
Thanks for leaving the Link to the pump you purchased from Amazon. I guess some folks don’t read the details you to so carefully included!😂
Man that is the exact same model i have doing the same thing. Thank you so much for this video i will now go buy a pump.
Strong work sir.
I’m working on a washer for a customer right now. Would be nice to fix it in-house, rather than a specialist, after I go over the engine.
I have a Troy bilt pressure washer I used the previous fall. Put it away for the winter, wouldn’t start. Cleaned out the carb and it started, only to find out the manifold was cracked. Replaced the pump and manifold, and works like new! Recommend running these out of gas whenever you use them.
The pumps require Pump Saver, from Briggs & Stratton, to condition the seals, and antifreeze the pump for winter. Any water left in the pump during freezing conditions will crack the pump manifold.
@@exiquter78412 true story
I have the same pressure washer that was given to me, so this video really helps. Thanks.
Great job
Awesome video! Thanks Bryan. Your detail was very much appreciated.
I have the same problem in my I will try..thanks😊
Great video, I learned allot from you, I just got a pressure washer my self, was $25 bucks and it’s really clean with a bad pump, I think I can fix it using your video, thanks allot I subscribed, my pressure washer is different so I will make a video for my channel fixing mine
You are a expert now good job.
Thanks 👍
Your video was a big help sir! Thank you!!
Appears all I need is a new seal on top of the pump. It is leaking oil, but I can’t find it anywhere. Everything is still working fine, just left with an oil spot on the ground after using.
When she summoned you 😂 solid gold! Thanks for sharing, just got one for free. Gonna run through it and get her running!
Turned out it just needed the carb cleaned up and the 3 pistons we’re firing perfect underneath after I removed the pressure pump (no flow). Bought a new one for $62, just got it on yesterday. Runs perfect and works perfect 🤘🏼
Rodger that man
Thanks for the video!
Great video thanks for sharing and I hope it's still working after 2 years for the time of this video.
It still works great. We use it pretty frequently.
Great job Bryan thanks👍🏻
Great Job 👍🏼 Nicely Done
Great video - thanks!
Great job.
By the way, get yourself a surface cleaner to attach to your pressure washer. It will take you about a third of the time to clean your driveway. You will thank me.
I bought same model years ago, used it a few times, loaned it out a few times, pump was cracked, I always kept it indoors, in the winter, so eventually got a new pump it’s been setting for so long , I’m tinkering with it now, water doesn’t seem to be flowing into the pump and out the wand,can seem to un loosen the hose from the wand..lol I’ll figure it out
Awesome Video!!
I have a Troy bilt. 2700 given to me. Someone broke a piece off the water replacement head. Which I’m going to replace. I can’t connect the won hose. Should I just replace the whole pump?
nice work
Yea, when water gets in there, it locks up. If you hold the trigger when you try to start it, a lot of times it will still work. I tried rebuilding mine. Probably easier to just buy a new one.
That's right,, put the girls to work and get busy on that car !!! ;) thatnks for the vid,, different model Troy Bilt, but that pump looks real similar to my model .
outstanding! thanks for the video. 84 bucks not bad where did you get the pump?
It came from Amazon. The link is in the description. The price has probably gone up though.
Only one thing missing! I need a better shot of that old patina Chevy truck!
It should be in soem upcoming videos!
My grey hubcap is missing too, 🤣🤣
I have a question. The plug in back of oil filter that keeps gas from running out in the filter is missing and leaking gas threw. Can I buy that plug. Pressure washer is not looked up. Would that leak keep engine from firing? That plug looks like it keeps gas in carburetor. I’m a woman and I need help. I enjoy having knowledge to do my repairs.
Do you mean the carburetor? You might need to clean out the carburetor
I'm curious about the little raised ridge area on the side of the crankshaft of your engine (you can see it at 9:34). I have a very similar model of pressure washer (020344) and the crankshaft doesn't have the little raised ridge coming out of the side of it, instead, there's a little groove there. So I'm not getting much pressure at all… But when I look up that crankshaft part online, it looks like there's a groove, not a raised ridge. So I'm not sure if there's a little metal piece that supposed to sit in the groove that's missing, or if I'm missing something else? Hope that's understandable.
Anyone have any ideas?
Sorry I have no idea on this one.
Could have mounted the new pump rotated 180 degrees to match old - foot spacing will line up, have done it many times, but won't hurt anything that way as long as the hoses can connect...
And you are absolutely correct. It is like heroin LOL, once you start you're doomed!
When it locks up like that you just have to relieve the pressure at the sprayer.
You can get a new pump and gear box assy on Amazon for about $ 65.00 to $85.00 and your back in business.
so your unloader didn't require any adjustments? worked right out of the box?
Yes. Maybe I got lucky.
Just got one today when i release the gun the choke opens up do i need something to hold it in place or is something messed up?
Where?
Did you buy the pump have the same problem
The link should be in the description. Thanks for watching.
I have a washer that belongs to a friend. The pump oil looks like sludge. Where do I get the seals that go around the pump rods? I assume that the sludge means that there is water getting into the pump. will the seals stop the water from getting into the pump? By the way the washer is the same one that is in the video.
I suspect if you search Amazon you can find a seal kit. I have seen something similar.
Would the pump you purchase fit my machine 2700max 2.3 max GPM 7.75 professional series? Troy bilt Briggs an Stratton?
I found that most pumps are pretty much the same as long as the GPM is close. I am no expert so I cannot offer too much fitment advice.
What is O.H.V. IN A PRESSURE WATCHER NEXT TO THE CABURATOR.
That is for Overhead Valve. Most small engines are designed that way now. I am not sure why they like to advertise so much.
@@bryansprojects3570 thank
That pressure washer you. Need to squeeze the handle let the pressure off . Actually helps keep the pump from messing up
Can you provide a link where you bought your pump? Would you recommend that pump?
www.amazon.com/gp/product/B07N1V5PZ4/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 , It seems to work fine. The only thing with this machine is that the hoses come out the opposite side which is no big deal to me.
what about the key in the shaft?
The key is installed when I am all done. the video may not have picked it up.
My part looks like yours. Where did you get part?
The pump came from Amazon. The link is in the video description.
Where did you buy pump
It came from Amazon. I think I added a link to the description since this has been a pretty popular video.
vapor locked up
How much was the replacement pump?
It was around $70. I put a link in one of the earlier comments.
Where did you order the pump?
I got it on Amazon. Look down in some of the other comments. I posted a link there.
What’s the part number?
I added a link to it in the video description.
I would have fixed it at the recycle yard.
😂 me too! I’ve scrapped a few
This excellent, diligent video represents things a democrat would never, ever do, not in 1 million years.
HaHa. I cannot disagree with you on that point.
Are you deranged? I am a woman contractor who has owned one these troy built pws with a Honda engine for about 12 years.... took it in after it started leaking oil and they said the pump needs to be replaced.... $500 worth of repair. I think I can do this more economically with the help of one of these UA-cam videos. And guess what? I am a lifelong Democrat. How in hell you feel that it's appropriate to inject political preference into these comments is beyond stupid.
What an idiotic comment.
Tell you wife to wear some shoes because I know , och 😮
Hahaha, that is my daughter. You would be hard pressed to get my wife to do that.
this was no troubleshoot should have called it pump replacement.