Our videos are for informational purposes only. All routine replacements and values can be found directly in the technical documentation for your car or use the help of the auto maintenance service. AUTODOC
Outstanding video and camera work - keep up the great work!! I am about to do this on my Z3 and this was really helpful. Much less intimidating after watching your step by step tutorial on the E46 :)
no the engine mounts are designed to hold the engine hence.. engine mounts. when gearbox is removed the engine can rest on the engine mounts without problem.
Our videos are for informational purposes only. All routine replacements and values \u200b\u200bcan be found directly in the technical documentation for your car or use the help of a car maintenance service. AUTODOC
On ne doit jamais graisser le guide de butée lorsque celui-ci est en plastique (ce qui est le cas) car il y a risque dans le temps d'accumulation de saletés et risque de grippage de la butée sur son guide ce qu'il faut surtout éviter et puis surtout remplacer l'articulation plastique de fourchette (surtout lorsqu'elle ne tient plus en force dans le carter ce qui est ici le cas)...............Les mécanos du dimanche.....
It’s difficult to provide a definitive answer to your question. We would need more information about your car to assist you further. Our Customer Support team is always ready to help you to find compatible car parts for your car and you can get in touch with us via email - info@autodoc.co.uk or form here: www.autodoc.co.uk/services/contact
the same way? its not like the engine moves to another place when on jackstands. tho filming a how to, on jackstands is not good, because you cant get the same camera angles.
I've done this on the floor on an E36. Tough tough job and not for the faint of heart. Must raise the car at least 22cm off the ground. Used an engine support bar to tilt and support the engine. Also used a wide range of extensions, rust penetrator fluid, impact gun, and a small scissor jack to lower and raise the transmission. If working uninterrupted this job could be completed in a weekend.
Is it nessesary to change also flywheel ? I have 320 cd cabrio 2006 and what happens that auto is shaking when releasing pedal in first gear and only first 4-5 starts, later nothing. I guess plate is bended so when geting warm it is more flexible and no shaking. My question do i have to change alao flywheel ?
@@mstv8849if its dual mass flywheel then you should because their job is to preserve transmission from engine vibrations and turbo diesels vibrate much more than atmospheric petrol engines. so every time you change clutch you should change dual mass flywheel. if you drive petrol then just get the surface cleaned or machined if its badly burned, but that only applies to solid disc flywheel.
![Cum se înlocuiește kit ambreiaj BMW E46 Cabrio [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/vJstU0vyv7k/mqdefault.jpg)
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
![How to change engine mount / motor mount on BMW 3 (E46) [TUTORIAL AUTODOC]](/img/n.gif)
this man just changed clutch in 18 minutes
Our videos are for informational purposes only. All routine replacements and values can be found directly in the technical documentation for your car or use the help of the auto maintenance service.
AUTODOC
Outstanding video and camera work - keep up the great work!! I am about to do this on my Z3 and this was really helpful. Much less intimidating after watching your step by step tutorial on the E46 :)
Thanks for your positive comment! Stay with us!
Great tutorial. Ignore the haters.
Thanks for your positive comment! Stay with us!
life saver again, great help on changing the clutch on my e46 2005 318cabrio
Great work guys . i use your videos all the time . Many thanks
Thank you for sharing your opinion with us.
Great job. Love from India ❤
Thanks, very good tutorial 👍
Thanks for your positive comment! Stay with us!
Great job as always!
Hex 14 for align clutch up ( like it ) 👍
Nice video !!!!
Is the hex bit No.H14 a 1/2 socket size or 3/8 ?
Thanks for your efforts
👍❤️
nice work
👌👍
Good 👍👍👍
Did he use an alignment tool for the clutch aside from the bolt on bit to hold the flywheel?
In the video, a special centering tool was used, as well as a flywheel clamp.
👏🏻 bravo
👍👍👍❤️
Wow
So you don’t have to support engine when removing gearbox? Will that not strain the engine mounts?
Thanks
no the engine mounts are designed to hold the engine hence.. engine mounts. when gearbox is removed the engine can rest on the engine mounts without problem.
Our videos are for informational purposes only.
All routine replacements and values \u200b\u200bcan be found directly in the technical documentation for your car or use the help of a car maintenance service.
AUTODOC
🎉
On ne doit jamais graisser le guide de butée lorsque celui-ci est en plastique (ce qui est le cas) car il y a risque dans le temps d'accumulation de saletés et risque de grippage de la butée sur son guide ce qu'il faut surtout éviter et puis surtout remplacer l'articulation plastique de fourchette (surtout lorsqu'elle ne tient plus en force dans le carter ce qui est ici le cas)...............Les mécanos du dimanche.....
Merci pour ta remarque ! Elle sera utile pour nous et pour nos abonnés. Nous allons travailler à améliorer la qualité de nos vidéos.
Is this clutch the same as a hard top e46 320d
Hi, is this set the same for my 325i smg
It’s difficult to provide a definitive answer to your question. We would need more information about your car to assist you further. Our Customer Support team is always ready to help you to find compatible car parts for your car and you can get in touch with us via email - info@autodoc.co.uk or form here: www.autodoc.co.uk/services/contact
Tutorial E36 328i please
It's almost the same
Why didn't he change the flywheel?
To be fair, few of us have 4 poster lifts... wouldn't mind seeing how you'd do it with the car on axle stands on the ground.
the same way? its not like the engine moves to another place when on jackstands. tho filming a how to, on jackstands is not good, because you cant get the same camera angles.
@@maltepettersson3083 Sounds like you've not done one of these on the floor ;)
I've done this on the floor on an E36. Tough tough job and not for the faint of heart. Must raise the car at least 22cm off the ground. Used an engine support bar to tilt and support the engine. Also used a wide range of extensions, rust penetrator fluid, impact gun, and a small scissor jack to lower and raise the transmission. If working uninterrupted this job could be completed in a weekend.
bv
Is that a Manual transmission car ?
Yes, with manual transmission
So the flywheel wasn’t changed?
In this case, the flywheel was not changed.
Is it nessesary to change also flywheel ? I have 320 cd cabrio 2006 and what happens that auto is shaking when releasing pedal in first gear and only first 4-5 starts, later nothing. I guess plate is bended so when geting warm it is more flexible and no shaking. My question do i have to change alao flywheel ?
@@mstv8849if its dual mass flywheel then you should because their job is to preserve transmission from engine vibrations and turbo diesels vibrate much more than atmospheric petrol engines. so every time you change clutch you should change dual mass flywheel. if you drive petrol then just get the surface cleaned or machined if its badly burned, but that only applies to solid disc flywheel.
Yeah now try a be 4 Motion with two jack stands on a parking lot
Thanks for the clarification, we'll take that into account in future videos.
AUTODOC
Its a nightmare
Amatér
Pls Change hydros they looke horrible 💸
Please specify the time of the fragment in the video.
AUTODOC
Like+++
Ok now try a VW 4 motion with two jack stands on a parking lot
no
Thanks for the clarification, we'll take that into account in future videos.
AUTODOC