360° Camera Rig DIY, 360° slow motion with your mobile !
Вставка
- Опубліковано 11 жов 2024
- 360° Camera Rig DIY, 360° slow motion with your mobile !
🔴Subscribe to the channel :- / @bibinsagaram
🔴Behind the scenes, more technical information and vlog : / @bibinsagaramvlog6972
🔵Facebook :- www.facebook.c...
🔴Instagram :- / bibinsagaramyoutube
✅Link to Materials and Tools (Amazon Affiliate Links)
🔵STL Files for 3D printing :- drive.google.c...
🔵Amazon.com
My camera
A6400 :- amzn.to/2Ks2bKl
Gopro hero 7:- amzn.to/3bvyvbj
Lens I am using
Sony E PZ 18-105mm :- amzn.to/3auKF2E
Sigma 30mm F1.4 :- amzn.to/2VP9TDM
Sigma 16mm F1.4 :- amzn.to/2XXFlSY
Belt 696-2GT-6 :- amzn.to/2N1T5VP
Mount Adapter for Mobile Phone :- amzn.to/30LHYZz
🔵Amazon.in
My camera
A6400 :- amzn.to/34WB8QI
Gopro hero 7:- amzn.to/2S1nKWq
My mobile :- amzn.to/3fnIlxj
Lens I am using
Sony E PZ 18-105mm :- amzn.to/3bug5rq
Sigma 30mm F1.4 :- amzn.to/34VE3JF
Sigma 16mm F1.4 :- amzn.to/3axJDCY
Belt 2GT-610-6.5 :- amzn.to/2zvu4PX
12V Dc Geared Motor 300 Rpm :- amzn.to/2UFAd3t
Mount Adapter for Mobile Phone :- amzn.to/3fhKhqY
Hello and welcome. For a 360 degree camera rig, I am going to use four PVC pipes. To cut the pipe square, wrap a paper around and mark it. And cut along the line. A sand paper and scissors can be used to finish the edge. I am using PVC cement to stick two pieces of 50 mm PVC pipe to the ends of a T connector. Next will be, fixing a 50 mm to 32 mm reducer which will be used for the camera arm. End are chamfered to fix the bearing. Middle shaft is from a 20 mm PVC pipe, closed with an end cap which has a 9 mm hole. A bolt is used to press the shaft into the bearing. A small washer is also added to the end. MDF sheet is used as base and a metal sheet for the top. To mark two opposite points on a pipe. Wrap a paper and mark the circumference. Fold it in half and mark the center. Wrap again on the pipe and mark the points. This is useful while drilling through hole in a pipe. I have made a 3D printed adapted for the counter weight arm. If you can find a cross connector instead of a T connector this part is not necessary. Now I am assembling the camera arm. Earlier this hole was drilled for a bolt to adjust the camera arm. I have to make a small offset for the camera arm since the phone camera has offset. Telescopic camera arm is made from UPVC pipe and holes are drilled along the length to adjust the length of the arm. Camera is mounted on an end cap. A quarter inch thread bolt is attached to the end cap, which is a common mounting thread for cameras. I am attaching a mobile holder to the thread. Link to most of the parts can be found in the description. Now I am making a counter weight arm which is also made from a UPVC pipe and the end cap has a hole drilled to attach counter weight. I have used a 3D printed part and a 6 mm knob for locking, a normal bolt and nut will also work fine. A wooden platform is fixed to the top of a metal sheet. For the main platform I am using a milky white acrylic sheet. One side is sanded and painted mat black. Since the acrylic sheet is glossy, I have sanded it to give a mat white look. Now we have two platforms to choose according to requirement. Now the rig is ready for 360 degree videos, but two more things can be added to make filming convenient. I am adding a motor to drive the rig. All the gears are 3D printed. There is a gear ratio of 2:5. Every second the arm will be rotating twice. Later I will replace this gear motor with a stepper motor so I can control the speed. Also adding a height adjustment and ball head for the camera mount will be a good idea. While building this I had an idea to simplify this rig a lot, comment below if you wanna see that. Second thing would be to add background, I made this with 0.5 mm thick poly-carbonate sheet. Cardboard or paper sheet will also work fine. Slow motion needs all the light you have. Clear acrylic sheet is used to protect the camera lens. After the first test run I have added a point source light from the top and mat black vinyl wrapping for the background. It can support my mirror less camera also. This is a clip from my main camera.
Don’t forget to check out how I have a mini cannon and the shield. Thanks for watching, don't forget to like and subscribe. And I will see you guys on the next video.
Thanks for watching, don't forget to subscribe!
Mini Cannon :- ua-cam.com/video/Y5Uvgtj6jEQ/v-deo.html
3D Printed Mini Cannon :- ua-cam.com/video/7c9VsqbxKSs/v-deo.html
Wonder Women Shield :- ua-cam.com/video/r1WlcfiqyF0/v-deo.html
you the goat !...I bookmarked about 36 videos within the last few days on how to build a low cost rig. found yr video and deleted all those bookmarks immediately when i saw a simple PVC build...genius using easy to work PVC and instead of welding up a metal rig.
Thanks a lot ! ❤️
Simple yet marvellous stuff. Great job. I liked this a lot👌🏻
Thanks Brother 😊👍
Conceptualised very well and results were amazing. I liked the video of fire, it looked like it was captured by a professional camera. Great job Bibin.
Thanks Arul 😊
Wow! The flames at the end were lit af, literally and figuratively! 😅😅 Good stuff bro!
Thanks bro 😊
The perfection shows your dedication! Excellent one! 🔥
Thanks Cheta😊
Dude I thought you were a crafty cinematographer but turns out you're just a f***ing pyromaniac! LOL
🤣🤣
Onnum parayan illa chetta. Adipoli
I want to see the simplified rig
Thanks 😊👍 Sure!
The ending!!🤣🤣🔥🔥👌 The build tho would definitely try this
Thanks 😊👍
Good project! 2:52 nice sound😍
The slo-mo videos taken using the rig are really cool😎 BGM well selected👍🏻 Yes would like to see the simplified version too. Ending😅
😘😘
Shots are awesome, especially those with shield.
Thanks Bro 😊
Too good👌I love the way you end the videos😍
Thanks Cheta 😊
yar mobile kon sa istemal kr rahe hoo great work
Thanks 🙏
Kidukki Unni Chetta
Thanks Pranav 😊
@@bibinsagaram Welcome Unni Chetta
Background Music Kidilan 👍👍
Thanks Pranav 😊
@@bibinsagaram Welcome Unni Chetta
Audio Super Unni Chetta
Thanks Pranav 😊
@@bibinsagaram Welcome Unni Chetta
Thanks to make life easier..
I would like to share to my college
Keep diy
Welcome, 👍
Brother, I want this, how much will you make it for me?
Sorry, not for sale
Your videos have been great
Glad you like them!
This one is the best of all! It's amazing!! 😄
Thanks Pranitha 😊
Great video!
Glad you enjoyed it
Can we buy it from you as a end product need for my product photo shoot
Sorry, I am not planning to sell it. It's not in a product stage.
Nice explanation!
Glad it was helpful!
amazing shots of cannon firing !!!
Thank you so much ! 😀
Nice work!
Thanks!
А что за такой телефон что можно при разрешении в 720 замедлить в 420fps??? 🥸
Oneplus 7T can shoot at 720p 960fps
Hi, do you have one available for purchase?
No sorry 😞
Genial, excelente trabajo
Thanks 😊
That's great man...are you still using it til this day?
Is it heavy? About how much does the whole unit weigh?
Thanks 😊. I rarely use it just for special shots. Whole unit weighs about 4 kg. Heavy base makes it more stable.
@@bibinsagaram yes... copy that... thanks
Im still looking for the screw bolt adjustable clamp...like you have.. guess ill just have to use can work
@@FLIguy317 search for C clamp 🗜️ in Amazon.
@@bibinsagaram I'm still having trouble with finding the right motor for my project
अद्भुत bro 🎉🎉🎉
Thanks a lot
Why very few views?.. it should be in millions.
Hope that UA-cam will start recommend my videos
@@bibinsagaram can i get your whatsapp number?
I don't have whatsapp, please find me on facebook or Instagram. Link to the profile can be found under the video description 👍
Would you let us know the bearing size ?
Cool rig..bro
Thanks bro!
Do you think you would be able to build one of these for people to stand on?
Yeah sure, then my parents will kick me out of house 😂
🙏🙏🙏 awesome chetta.
Thanks Baby 😊👍
Suuper
Thanks 😊👍
Wow.... good effort
Thanks 😊
It's awesome ❤️❤️👍
Thanks 👍😊
nice
Thanks Bro 😊
Super bro
Thanks Bro!
Awesome
Thanks 👍
Like it
Thanks !
💯🔥
Thanks Bro 😊
Mantp
sorry?
what was your total expenditure on the material ?
Around 700rs
How much weight of the camera of this rig can handle?
My camera including lens was 700g that was fine for the rig. Anything more than a kilo will need fixing the base and reinforcement.
480 fps kis mobile phone mai ata hai?
Search on Google, there are many
wow
Thanks 👍
Hi could you print me one gear
Please find a shop which print parts
You doing a great 🎉but the music is shiiiiii
can orbit a bonzai a girl... something wonderfull
😂
Now u have a display area for miniature stuff
Oh yeah !
Start your accessorie business with this❤️
Thanks 😊
Hello sir
Hello 👋
Bearing size 6204 not 6203
Right! it's 6204